Hello...I am fairly new to weaving and have been using a 32 inch Ashford Rigid Heddle for about 5 months.  I am totally hooked and now want to advance to a small floor loom.  I am not sure about the baby wolf, and was wondering if anyone has had experience with the Harrisville looms?  I have limited space and need to move the loom once in a while.

Thanks,

 

Boyweevil

Comments

JennieHawkey (not verified)

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

I teach weaving and have several different kinds of looms. Harrisville is a nice loom, somewhat lighter than a Baby Wolf. Harrisville was my first 4-harness floor loom and I chose the option of putting it together myself. Not only did it cost less, but I learned so much about how the loom works and also was confident about making adjustment if they were needed. The company carries parts and add-ons and have been quite good to work with. These looms cost quite a bit less than the BW, too.

Cons

If you want to weave rugs or other products that require a lot of beating you may not find that this is the best loom for you. I also move these looms quite a bit, laying them down in back of my car, and the harnesses tend to slip off. If you plan to do the same I encourage you to buy some velcro straps to tie down the harnesses before moving the loom.

All in all, I would encourage you to consider a Harrisville as it is a good loom and a good value.

Jennie

 

sandra.eberhar…

I have not have any experience with Harrisville, but I have heard may complaints about the hanging shafts catching, banging, and just not behaving.  I used to have a BW, and I sold it because it did not fit me and was not adjustable.  Whether you can change the height of the treadles to fit you is important.  The BW has the shafts captured in channels in the castle.  My BW was not as movable as I wanted.  I could wheel it around the house, but it would take a van to move it around.  I think if I wanted a really movable floor loom, I would get a Wolf Pup.  The BW can't do rugs either.

Sherry Crum

I started weaving just this past September and like you, quickly became hooked!  After 2 months, I had the opportunity to purchase a 36", 8 harness Harrisville and am so glad I did.  Yes it is lighter than some looms but it's a wonderful first loom.  While it can't handle rugs, I can weave everything I'm interested in at this point, scarfs, placemats, runners, dish towels, shawls, baby blankets. The harness wil slip when moving the loom but it's very easy to get them all back in place. Eventualy I will consider purchasing a Macomber of Schecht if and when the right one comes along.  When that time comes, I have no doubt that the HD will be easy to sell. In the meantime, this loom is serving me very well and I'm learning great weaving lessons on her. 

MK Custom

I've had a Harrisville T6 for over 25 years and generally been happy with it.  That said, it's beginning to show its age as I've used it extensively for rugs and saddle blankets.  The hanging shafts occasionally catch on one another and the wingnuts need to be tightened frequently.  If I were starting over, I'd purchase something better-suited to rugs.  But if rugs aren't your goal, it's a good all-around loom for dish towels, scarves and other similar projects.

sarahnopp (not verified)

I will agree with the other points above. I have a lovely little 8 harness Harrisville and it is a great little floor loom. It moves very easily and I like the noises it makes. I did have some issues with the braking system being wonky, but the Harrisville staff were great when I gave them a call and I got it all fixed up. It really is too light for anything requiring heavy beating. In fact, I have a weft facing project on now which I thought would work, but the silly frames kept jumping off the hooks LOL! I have blue taped the things on for this project. 

Michael White

We have 3 HV 22/4 looms used for students and demo. The problem with the newer loom is the open hooks on the top of the heddle frames. I fixed this problem by closing up the hooks. The other problem is the beater sits on a pin and will come off when being mover. The fix I put a metal plate on the bottom of the beater legs.This is a great loom our first one is over 35 years old and had been moved in and out of every kind of car/truck you can think off. We also have a 56/16 Mac, 48/4, Mac, 32/12 Mac and a 45/4 Newcomb studio loom.
Michael

boyweevil

Thank you for the helpful comments.

 

Anthony

boyweevil

Thank you for the very helpful comments.

 

Anthony

Honeyfinn

I have had both HD and BW. I sold the BW because it was noisy and wabbly, but will keep the HD (36/4/6). I like the hanging sheds, and have had no problems with them. The only problem I had is that I have graduated to want/need 8 harnesses. While it can move around the house easily, I found that it is too cumbersome to move out to travel regurlarly. The 22" might be okay for that though. For my travel loom, I got a 8H 24" Baby Mac, and am thrilled with it. It folds and travels fairly easily, is quiet enough for me, and is something I can grow with for a very long time. 

jj50 (not verified)

My first floor loom, a gift, is 4H 6T 36" Harrisville Designs kit loom. I have had it for 30 years and still like it a lot for weaving light weight pieces. It has been a comfortable and reliabe loom.

I solved the noise problem of the frames clanking together by sticking small stick-on felt pads on the inside of the frames. It's a muffled banging now. I prefer hanging frames over those that are set in grooves. For one thing, it's really easy to add extra heddles if you miscount. :)

katiemac

I have an HD 4h 6T loom. I love it. It's really easy to move & takes up so little space when folded.The only times I've had the harnesses bump agains each other was when the loom wasn't level. That happens on carpeting. DH gave me some shims to put under it to level it, & no more harnesses touching.

I just purchased an 8h BW to replace the HD loom. I enjoyed weaving on the HD.

Jane Greer

I have a Harrisville 4 shaft loom as well and I have only been weaving since Dec. but it is a great loom for a beginner. I bought mine used and have had none of the problems other people had, but I would have to say since you have already been weaving, definitely go with something that has 8 shafts. I have already outgrown mine and am looking for a Macomber 8 shaft so that I can do rugs (so if anyone out there reading this with one they want to sell, hit me up....lol). I would probably keep this one if finances allow because it is a great loom. 

Jane

FallRiverFibers

I am searching for the older model Harrisville Loom handle. Please contact me if you happen to have one for sale.

Diane Roeder (not verified)

Hi,

I have a new-to-me older 8 shaft Harrisville 22 inch loom.  I don't attend many workshops but I wanted to have a floor loom available for one if needed.  

When I brought it home it travelled folded up, slipped into the back end of my vehicle.  When I pulled it out the shafts were disconnected  and it was quite a mess.  This, despite the fact that there was a warp on the loom.

Cleaning up the mess was a really good way for me to get to know my  loom but it would be very annoying and stressful for me to arrive at a workshop with the shafts in such a disarray.  I'd love to hear from other HD owners about how to keep those shafts attached to the chains and in place... or whether that's just not possible.

Thanks!

Diane

Marianne88 (not verified)

Hi,

I you have to move the loom, maybe you could consider also the Leclerc Compact loom who is foldable and has wheels for easily move it or also the Julia loom by Glimakra. 

 

sarahnopp (not verified)

I have had this happen on my Harrisville too. I think the next time, I will be using blue painter's tape to make sure the hooks don't come out of the eyes of the shafts LOL The last time I transported mine, it was upright and it did help to tie the shafts together and then counter-tie to the uprights of the castle, so it moved less.

Dena (not verified)

One other thing that I didn't see mentioned is that I find with the Wolf looms I get a MUCH better shed under tension and the distance from the breast beam to the beater is more workable (larger).  As someone who tends to weave fast and under tension, I have been frustrated with the Harrisville looms, while totally in love with the Wolf looms.

sequel (not verified)

When you move a Harrisville, tie the shaft frames down to the lower castle crosspieces and the sides of the shaft frames to the castle.  That should keep adequate tension on the whole shaft assembly so the frames don't jump off the cables and you won't need to use all those words your mother doesn't approve of.

But as a first loom and a travel loom, I like it better than the Baby Wolf, especially if you don't have long arms.  Folding a Baby Wolf requires a greater wingspan than I have, and they are heavier.

lilyspin

I have used the smallest plastic strips ( that are normally used to tie electrical wires) to "close" the openings on the hooks that fasten the cords that lift the looms. These keep the shafts from becoming unhooked when the loom is transported. All of the cords still have to be reinserted in the proper grooves on the pulleys, but that is done quickly after the first few moves.

sarahnopp (not verified)

Oh- one other thing I did was make little anti-rattle devices. If you ever get a pedicure, you have seen the little toe separator things made of something rubber/foam. I used a couple to keep the frames in place and it did help.

Kstaubin

about 30 years ago (!) I purchased a 22" Harrisville 8 harness floor loom.  I attached dresser handles to each side and used them to carry the loom to many sites for demonstrations (schools, art fairs, and encampments, etc)  I learned that the harnesses must be tied together before transporting, and that eliminated a lot of transport mess.  The loom has held up to much travel and abuse, and the wood has now weathered to a deep golden color.  The only complaint I have is regarding the original leather harness cords-they have stretched to the point where I have almost no shed.  I can order new nylon ones, but resent the fact that I have to pay a pretty high price to correct a design flaw; at $10.00 per cable that would add up to $80.00 + shipping!  They should offer a discount.  Other than that I love it, but have not used it for several years due to the problem wit the cords/shed.

Dena (not verified)

I think of the new cords as a design upgrade, not a flaw.  After thirty years, needing to spend $80 to replace a worn out part seems reasonable.  More than anything, it would get your loom back to happy condition again. Go for it!

Submitted by boyweevil on