Okay, here is Stupid Question No. 312,111,231:

I have searched just about all the books I have, the web and weaving sites, but no where have I found the answer to this question:

When do I remove the lease sticks?

I haven't done any research on this question, but have finally gotten my first warp on my loom and I have two extra threads (must have counted wrong).  They are both on the left side of the loom.

Can I just ignore them as I am weaving and wind them up as I advance the weaving?

Thank you for helping this self-taught weaver with her first project.  I have made several mistakes, but I know that I have learned from them and the next warping will go much faster.

 

Comments

Queezle

On the lease sticks - I think some people leave them in, while others take them out once the loom is threaded.  I've been taking them out just before I tie onto the breast beam.

Regarding your two extra threads, yea, I think I would just ignore them, let them fall onto the floor. 

Good luck!  I taught myself in the days before the internet, with only books to use, so I know you can do it.  You might look at youtube - lots of really useful videos.

Keep us posted on your progress.

CelticCats

Thanks Quzzie. I have done a lot of research and watching videos. They make it look so easy, I have found it has taken me several days to get the loom dressed. Almost there. Again, thanks

Yvonne K

Hi, I'm also self-taught, long before internet. Help yourself using all the resources you can get!

On the matter of leaving in the lease sticks, they can be useful if you have a warp where the ends stick together or twist around each other. I have found that woollen warps and fine cottons can be hard to deal with.

Problems can arise when the tangles get into the zone between the back beam and the heddles, or even up and into the heddles. If the lease sticks are left in, you can sort out threads that are stuck together before they can pass through the sticks. This adds another step when advancing the warp, but I have often been glad of the lovely clear warp I have coming up behind my heddles. 

However, an important consideration is the distance between the heddles and the back beam, because leaving the lease sticks in effectively shortens your warp and makes it harder to get a good shed. If necessary, lease sticks can be moved into the space behind the back beam, between the beam and the warp roller. 

EvaHall

Sometimes a warp Will give you trouble with Breaking threads. In that case the lease sticks Will be useful Wien you trace and replace the broken threads. I keep the lease sticks until the end of the warp, when they get near the heddles.

ReedGuy

I leave mine in and back by the beam. I secure it there and never need to fiddle with it. I use it to find errors but also to fix broken ends. I remove them on the last 2 yards when the beam stick reaches the back beam. From then on out the shed begins to close narrower as the beam stick reaches the heddles.

endorph

Reedguy - after tying on I move the lease sticks over the back beam and down by the warp beam, tie them in place and pretty much forget about them. They are there if I need them but out of the way

kerstinfroberg

Lease sticks can actually help with the shed on sticky warps - they cause the angle to be steeper, thus helping separate the stickies. (For that, experiment with their position - they can often come forward more than you would think)

CelticCats

Great suggestions  thank you very much  so surprised that the books I have don't mention your great ideas 

sally orgren

As a beginner, I always left them in, lashing them to the back beam. Then I learned the "it depends" situations—

If you are using a table loom or loom with a short distance front-to-back, it might be better to remove them to get a larger shed.

If you have a very fine or delicate thread, it might be better to take them out.

If you are planning to sample a lot from one warp, i.e. cut off small pieces and rethread variations and/or resley, it is good to leave them in.

If you have a threading that can produce plain weave, you can remove them once beamed and threaded, then reintroduce them at any time when you need to, by treadling them back in. If your threading doesn't produce plain weave, it might be to your advantage to leave them be.

 

ReedGuy

As Sally said, one size don't fit all. If I was weaving with mohair, I would remove them after threading and checking errors. I think the yarn would snag since it's so hairy and 'untrained'.

Queezle

I've never considered leaving them in, probably because you all just educated me about them in the past year.  Being self-taught is possible, but on my goodness - so many things I failed to learn!  I'll try leaving them in on my next warp.

laurafry

Weaving is challenging because the only 'correct' answer to many questions is "it depends"!

If you are learning by yourself, I recommend getting several different books, (Peggy Ostercamp is comprehensive), watching clips on You Tube, trying different things.  Looms are not built equally, yarns are not the same, weavers have different dis/abilities.  What works for me may not work for you.

Bottom line?  If you are happy with your results, you don't need to change anything.  If you aren't, keep trying different methods until you find the ones that work for you.

Recently I completely changed the way I wind bobbins.  I was working with 60/2 silk and the bobbin kept jamming in the shuttle.  I kept trying different ways of winding the yarn onto the bobbin until I found one that worked 99% of the time.  And I've been weaving for nearly 40 years!  I still learn something new, especially when I change what I'm doing - the yarn I'm using, the weave structure, etc.

cheers,

Laura

Sara von Tresckow

Interesting is, that while industrial looms have replaced many things we use on handlooms - shuttles and treadles among them - roller temples and lease sticks are still standard equipment on any industrial loom - from running museum looms to today's digital Jacquard machines.

The correct time to remove them is when the tieon bar comes over the back beam. If they get in the way during weaving, you can push them down between the back beam and warp beam.

I just finished a weekend workshop and after seeing how the sticks improved so many little things on the looms, all enthusiastically left them in. Even on the Dorothy looms, tying the sticks to the back beam did not impact the shed at all. Some weavers took advantage of being able to bring a repair thread out of sequence to a new heddle and not have any difficulty as long as that thread went through the lease sticks.

When it was time for the slide presentation of our recent trip to Europe, after the third loom, they started looking for the temples and lease sticks and live weights - amazed to see what variation in size and form, as well as how standard it is to use live weight, have roller temples, and leave the lease sticks in until the warp is finished.

Also, lease sticks should not be round or square, but flat and beveled like those on Swedish looms. I've tried the dowels and there was far too much drag on them. The beveled sticks are an aid while winding on as well as when weaving. And they should be tied together to prevent slipping out - that way they can tip over and still maintain the cross - and that cross really should be maintained until the end of the piece.

kerstinfroberg

I have seen (round) glass rods in several silk waeving mills (now mostly museums, but still producing). IIRC the explanation was that glass did help against static buildup.

Sara von Tresckow

Yes, I've seen the round glass rods - but for handlooms, the flat sticks are far more effective than wooden dowels. 

I've tested both.

sally orgren

about looms in Vietnam, Laos, etc. and the speaker noted that the lease sticks remained in all the looms she visited and photographed. 

 

CelticCats

Thank you all for your suggestions. I have a Julia loom by glimakra and due to the depth, I have moved the lease sticks over the back beam and will tie them there. I want the project I am working on to be as good as it can be as it is for my sister who was just diagnosed with melanoma and will start treatment soon. For the last month I have watched many online videos, the video that came with the loom, and Interweave videos. And, have done a lot of reading and research. I am a self- taught just about any craft you can think of having to do with fibers and other crafts. This is just another endeavor into learning something new. Thanks to everyone for your wonderful comments and suggestions. As soon as I set the treadles and start weaving I will post here how it is going.
Submitted by CelticCats on