Got a tip of trick to share? Here's your forum! Be sure to post a photo. Words alone cannot describe the innovative weaving tools made of out of everyday objects, or the whacky things weavers will do to achieve the perfectly tensioned warp.

Don't be afraid to share your inner MacGyver!

Comments

sally orgren

I know many folks know I HATE moving heddles. I love every aspect of weaving, including warping and unweaving, but don't ask me to deal with heddles.

So here is how I make moving heddles as painless as possible in my weaving world. The recycled plastic packing strips slip easily along the loops of metal heddles, allowing me to slide heddles off their heddle bars effortlessly, and slide them onto new shafts without twisting, which can sometimes happen with string.

You can also store extra heddles on these strips. I just put tape over the ends of the plastic to keep them from sliding off. The plastic is flexible, so I can roll them up into a baggie.

I know, I know. I should stop whining about heddle hopping now.

MMs-and-OOs-Ha…

Take out insurance along the way. It is worth every extra minute spent. Check your threading in any kind of group you can count easily. I love multiples of 4. I will even change a draft if the weave structure permits it to work out in multiples of four. So grab the threads you have sleyed, count them, and count them by looking down at the top of your heddle frames. You might have to look at them at an angle. So for any section, i.e., 4 on H1, 8 on H2 etc. It is a cross check. I also begin threading from the center of my loom.

Queezle

Remove shafts to adjust heddles!  I just learned this one from looking at  the post above, have yet to try it.

Both my looms are used, and came without books.  I never considered being able to remove the harness, and its really hard to move heddles on inner harnesses when they are in place. 

(Makes me wonder about the other 100 things I'm probably doing wrong!)

MK Custom

Here's one way to make a fringe twister from things you might have around the house or shop - 2 small wood clamps, 2 blocks of wood, some steel rod soldered to shape:

sally orgren

I have been winding mulit-colored warps, and prefer to use recycled CD spindles to keep the cones or tubes from falling over and squirreling around the studio. The taller spindles work well with taller than average cones.

You can move them right where you need them, or cluster them together (as you would have on an actual cone rack) if feeding the yarn into another device (like a paddle).

tommye scanlin

I've done this in variations to hold spools of yarn when I needed another rack.  It's done with light-weight chain and dowels. One version of it was done using nails from which to hang the chain.  In the other version, I hung the chains from a frame loom that was in the studio. 

I also made another variation on this by using a wooden tapestry frame and attaching the dowels with seine twine at each side, putting the spools in place before attaching the second side, of course.

barleycorn

I like to protect the pins at the end of the temples that are not in use with those old fashioned snap change purses (the ones you squeeze at the top corners) to open. They fit perfectly but I'm not sure they make them anymore. 

sally orgren

This is a tool that helps you isolate an errant warp to make the repair easier.

Queezle

If you do not have a real temple, you can clip or pin the edge of your weaving, and weight it with water bottles.  I have tried several types of clips, and found these $0.39 ones with wide flat surfaces to hold the fabric well, don't make holes, and are easily repositioned.  To keep the weight even on each side, I used water bottles as weights, and measured them using my baking scale.  The inspiration for my version is from this link:

http://www.woolgatherers.com/id105.htm

I lashed dowels to the side to hold the weights away from my work area.

tien (not verified)

I recently discovered (via a suggestion from Ulrike Beck) using acrylic tubes rather than wooden lease sticks:

The tubes are rounder and smoother than wooden sticks, and they glide through the warp like butter. They are flexible enough to bend not break. I tape the ends together using blue painter's tape, as you can see in the photo.

So far I've only used them for back to front warping, but i think they would also work really well for threading/weaving. Will post an update if my opinion changes.

I bought mine from a nearby plastics vendor, Tap Plastics - they also do mail order. 1/2" clear acrylic tubing.

kerstinfroberg

In the old silk mills I have visited, they nearly always used (round) glass rods...

How is the acrylic with static electricity?

sally orgren

I am being economical — here are two tips in just one photo!

1) I use sticky measuring tape (exactly like masking tape) on my warp to measure progress. Comes in 12" increments on a roll, and you can find it at art supply stores. (I get mine at Jerry's Artist Supply.)

2) I love the Toika temples as they don't take up a lot of real estate on the surface of the fabric but provide solid tension across the warp. I know folks worry about temple teeth marring their beams. (Patty L, the snap coin purse idea is great!) Along the same lines, I use the plastic covers that came with the temples. I just slide them over the teeth when in use, and it is easy to slide them off when it is time to readjust. (P.S. Thanks for the loaner temple, Betty!)

3) Bonus tip! When designing an overall lace pattern, it is probably better to design the edges without the lace, so you don't have excessive draw-in from the floats at the selvedges. (Dope-slap to the forehead on this one ;-)

sally orgren

Take a photo of your work and then look at the photo immediately, on a larger screen, not your camera screen.

Sometimes you see errors that were not evident when you were sitting AT the loom and the fabric is in front of your nose. (Arghhh!)

Do you see the error, too?

Plan B, I will try to plan a cut line at that point in the yardage. And, I'll take a highly contrasting thread and mark that place in the yardage now, so I will know when I take it off the loom there is an error in that section.

sally orgren

I made a template of my weft stripe order, so I could run it alongside my fabric to make sure there were no errors. (Gee, it would have been smarter to do this while weaving, not after the fabric was off the loom!)

Submitted by sally orgren on