Hi,
I've been teaching myself to weave on my 4 shaft floor loom for the past year or so. And now that i'm working with finer yarn on more delicate projects I've noticed that I may have warp tension problems.
I usually work with the warp on a very high tension, as I find it easier to throw the shuttle, and generally feel more comfortable with it, on a higher tension I also find that I skip less warp threads; although this doesn't always help. After reading a little lately and getting 1m into my current project I've realised that this may be too tight. As I wind the project forwards the weft distaughts, this problem in the past has sorted itself out once the project was removed from the loom but this time, with 2ply cotton and 1 1/2ply merino it seems a little more permanent.
Is there any way to avoid this? is it a warp tension issue? or just a product of having a loose weave?....
(its worth noting that my warp varies in colour and thickness, in some spots I also have double warp, and very occasionally tripple (using a 1ply cotton). My sett is 18epi)
I understand that my varrigated warp isn't helping the problem but i've encountered this issue when using a plain warp also...
I've cut off the 1m that i've completed and plan to tie the rest of the warp up again and continue, hopefully avoiding the distortion that I encountered last time....
I will also try advancing the warp in smaller amounts and see if this helps... any other tips for now or in the future would be appreciated,
Thanks!!
Comments