I'm planning a table runner using 8/2 cotton for both warp and weft. It's overshot and will be using 10/2 cotton for the tabby. I'll sample using extra warp at the beginning of the project, but it would be nice to get it right the first time to avoid resleying. I'm thinking 20 epi for a semi-rigid feel, but still somewhat flexible. Looking at various sett charts, 20 epi seems to be at the high end for tabby, but very low end for twill. I always get confused though when determing epi for overshot. The floats are up to 6. Any suggestions, or do you think 20 epi is good?

Comments

ammann58 (not verified)

I recently wove a blanket in overshot. Used 10/2 warp and 16/2 tabby with single ply wool for pattern. I was very happy with 24 epi. It worked well.

Before I finished reading your post, I was thinking 20epi would work with 8/2. I think you would get a more rigid feel with that than I did with the blankets. That's probably desirable in a table runner.

Just my thoughts.

Good luck.

WeavingRose (not verified)

I am contemplating an overshot project using rayon. I have never done overshot before so I am unsure of how to proceed.

 I am thinking an 8/2 for the warp and the tabby (in a lavender) and a dark purple design in what is like a 5/2 boucle.

I am thinking of a sett of 20 dpi.  I was going to make a throw, but I'm thinking of starting it out as a scarf to sample.  Any thoughts, fellow weavers? Does this sound like a good sett/size differential? 

I am also busy digging through my various books for information, but thought of everyone here.  Thanks in advance for any and all help!

sally orgren

For 8/2 unmercerized cotton, I usually use a set of 24. For overshot, every other thread is plain weave, so I would base my sett on that. I would think a tighter sett will also lead to the fabric having a longer life. A runner can be sturdier than a towel, perhaps another reason for a tighter sett?

For the pattern weft, I am not sure why you are using the same size as the warp, 8/2? For better definition of the pattern, I would usually use something slightly bigger, like 5/2.

For the ground (or tabby) weft, I would use the same as the warp 8/2. I might drop down to 10/2 if the pattern needs to be squared when I start sampling. This might be a last resort. My first choices might include beating harder to square or resleying. 

Sorry, Weavin Steven, but no guarantees. Sampling is the only way to find out if your particular vision actually weaves up like you expect it to on your equipment!

P.S. Six floats are okay if they are 1/4" or less overall. At 24 e.p.i. that would be okay. At 20 e.p.i., hmmmm. I'd have to see it and feel it to tell if I would like that or not. 

ReedGuy

When I did Christmas rose, the sett was 14 epi in the warp to square up with 10/2 merc cotton. I doubled the pattern weft with 10/2. It all depends on the draft as much as the yarn. I had done a table cloth in block weave with a tabby ground, but it was 28 epi to square up with 10/2. :) If your yarn for the pattern weft is twice the size of the warp, then your sett will be half what your used to. Things change when you start using other combinations of yarn and fibres. Wool for instance packs tighter than cotton. :)

Submitted by Weavin Steven on