...but end up with a fabric that's not too thick or 'closed'. The weft is Cascade Eco Duo, a thickish and predominantly alpaca blend that feels just scrumptious. I'm thinking of using the Valley yarns Colrain lace (merino-tencel) as warp, sett at 15 or 16, and then mostly just 'placing' the weft, not really beating it in. The weft will probably visually dominate, which is what I want, but I'd like the on-loom fabric to be as open as possible.

Am I nuts? or is this at least somewhat feasible?

Julie

 

Comments

Sara von Tresckow

I think you'd want to open up the warp sett a bit or you will not see the weft that much - and then just bring the weft in gently to keep things soft and drapey.

ArtistInNature

maybe 12? would that be TOO sparse a sett? I don't want the weft to completely cover the warp and end up with something rug-ish in nature...thanks for the note, Sara!!

Julie

Weavin Steven

I specialize in alpaca woven items. However I'm not familiar with the yarn you're using. Is it sport weight? If so, 15 is too high a sett. When I use sport weight alpaca, 10 or 12 is good, depending on the weave. And you're correct, just "place" the weft by using a super gentle beat. 

Also, to make it soft, finish by hand washing with shampoo and conditioner. You could even lightly brush it.

ArtistInNature

I want to use as weft seems like it's about a worsted weight, maybe even slightly heavier. The colrain lace I want to use for warp (it's a merino-tencel blend, sold by WEBS / yarn.com) is a laceweight yarn that's normally sett at 15 to 18.

laurafry

Hard to make 'thin' fabric from 'thick' yarn.  Combining with the lace weight will help and you might want to give the cloth a good hard press after wet finishing to compress/flatten the yarn to make it thinner.

Just a thought.  Some samples may be in order?

cheers,

Laura

ArtistInNature

- I know the fabric won't be 'thin', but I do want it to be 'open'...if that makes sense (or is possible :-). Hoping for soft and drapey, not rug-like. The alpaca-blend weft yarn is very squishy, so your suggestion of a good hard press may be in order.

So much fun to try new things!

Julie

sally orgren

Group thin warps together with accents of the thick? Or incorporate skipped dents to create spaces. Use both thick n thin in the weft...what about a lace structure with the thin, framed by the thick? Your warp and weft don't have to be mutually exclusive. This could be fun!

sandra.eberhar…

The kind of fabric I think you are visualizing (light, airy, soft, stable) can be made, but it requires some stabilization beyond normal weaving.  Fulling can do this, and can create a lovely, airy, open and stable fabric.  If you want to do this, you have to make sure that your yarn will felt.  One of the first things I do when planning a wool or alpaca project is to roll a ball of  the warp and weft around in hot soapy water to see if they will felt.  That test tells me whether I can use a more open sett that requires fulling for stability.

Sandra

sandra.eberhar…

After looking at your proposed warp and weft again, I realized that I made a series of three throws with warp/weft very similar.  I used an alpace warp (~2/10) at 10 epi.  I used a handspun mohair/merino that was about dk size.  The weave was so open that when the cloth passed over the squarish breast beam, it created gaps in the weft.  I had to push the wefts back together before it hit the cloth beam.  This fulled to glorious airy and stable throws.

ArtistInNature

Oh boy, Sandra, that sounds just perfect...thank you for sharing that! I'm planning to sett the 2/10 merino-tencel warp at 12, so hopefully I'll get something as light and airy as you're talking about. The Eco-Duo alpaca yarn is a multicolor charcoal/ecru which, with a black warp, should make a somewhat 'camo' flavored cloth, which is exactly what my husband wants :-).

I may try your fulling test before I start just to make sure things will stay fairly stable. (What a great idea - thank you for sharing that!).

Sally, I like your idea about mixing warp and weft together...but the Eco Duo seems soft enough (and thick enough) that I'm not sufficiently brave to tension it as warp and subject it to the reed rubbing. 

Julie

ArtistInNature

...since I so appreciate the advice everyone gave. I sett the Colrain lace at 12 (rather open), and used my beater very gently, to place rather than beat. The Cascade Eco Duo weft squished much more than I expected, and the on-loom fabric was quite thin. The end product after wet-finishing was light, thin, drapey, and soft, and my husband was very pleased with the result (it's now his favorite scarf).

planttapestry (not verified)

we need a picture now.......

sandra.eberhar…

I'm glad your scarf turned out so well!!!  I am working with a cotton/cashmere/merino that I had hoped to do this with, but there is too much cotton and it will not felt.  I am also working with some woolen-spun commercial yarn that felts well.  The cloth looks like coarse hardware cloth coming off the loom, and has to be handled carefully, but fulls to remarkable light, fluffy shawls.

ArtistInNature

...this is not exactly sophisticated weaving, or sophisticated anything! it's just plain weave. What the photo doesn't show is how thin and airy the scarf ended up; I could have actually beat the weft and I don't think it would have been much thicker. I'd REALLY like to try the Cascade Eco Duo alpaca yarn in a twill weft, as I suspect it would be lovely, soft, and thicker-but-not-too-thick...

OK, I'm giving up for now...I've uploaded the photo to Flickr, and linked directly to it, but for some reason the image isn't showing here. I sure wish Weavolution had direct file access so I could just insert a photo from my hard drive!!!

LisaAlissa (not verified)

It looks like Weavolution doesn't support the Flickr-supplied code for forums.  So to use the image-posting utility here, you have to violate the Flickr-community terms of service...or you have to separately post the link to the Flickr page, once you've extracted the image's url.  When I do that, I get to see your lovely scarf!  

Here's the page where the image is on Flickr, to comply w/ Flickr rules: [url]http://www.flickr.com/photos/artistinnature/11030407973[/url]

HTH,

LisaAlissa

ArtistInNature

LisaAlissa, thank you for the help - and for making me feel less stoopid! I hope I remember for next time :-).

Julie

Submitted by ArtistInNature on