Hi, all!  I am a newish weaver....I tried REALLY hard using Chandler's book and Madelyn's DVD to warp my 36" table loom.  I am using 10/2 cotton, 2 threads/dent, 10dpi reed and about 500 ends for towels.  First, I managed despite really trying to keep my chokes right to tangle my threads (I used 4 colors and had each color coming from one central chain;  there were numerous stripes.)   I straightened it out to some extent but then seemed to break numerous threads.  Is it possible that I have too many heddles in this space? ( didn't use the whole length of the loom...probably all but 10" )  Is there a limit to the number of heddles one can use on a loom...well, I'm sure there is, but is there a rule about that?

I'm very disappointed as I spent sooooo much time on this and I think I'll end with nothing..  Oh, I warped front to back threading the reed at a table and moving to the loom to thread the heddles.  I sew, knit and make my living using my hands plus have a post-graduate degree...how come I can't do this? !  Thanks for any help!  

Comments

mneligh

First, send pictures.  They will help us all.

The limit on the number of heddles is the number you can fit on the a heddle bar * the number of shafts.  You haven't gotten there yet.  10/2 cotton at 20 epi does not sound too dense.  Typically, your epi should be 1/2 your wpi, although that varies a lot, ranging frowm warp faced to weft faced textiles.

The colors all coming from one central chain sounds suspect, but I'd have to see it to make sure.  For 500 ends, I would say you need a minimum of 5 chains, and I personally would do closer to twice that.  You wind the chains in the order in which the threads will be threaded into the heddles.

I'm sure help will arrive when we all can see pictures.

sally orgren

I am unclear where you are at now— is the loom threaded or not?

If not...

1) Are you breaking warps when trying to beam the warp? Are they breaking in front of the reed? Or breaking at the heddles?

2) Are you beaming under tension? Do you have some kind of weight on the warp at the front of the loom, or are you doing the "yank 'n crank" method?

3) Where did the cotton warp come from? (New or old?)

4) Have you drawn aside the unused heddles (to the left and right of the warp), so they are not compressing the active heddles while beaming?

5) How many heddles are on each shaft? Chances are you are not even close to having "too many". (I keep more than 100 on each shaft of any loom). And I usually thread 10/2 cotton at 24 epi for plain weave, so at 20 epi, 2 per dent in a 10 dent reed, you should be fine.

Let us know the answer to the above questions, and we can trouble shoot. (A few broken warps are not the end of the world or a project disaster by any means. ;-)

Sara von Tresckow

10/2 cotton can be up to 24 epi and still not be too close.

Doing 500 thinnish threads from 5 central color chains from the front is not really a good idea. With much experience, it probably can be made to work, but chaining your warp by breaking and tying in the proper color sequence, using 2-4 warp chains and beaming that warp under tension using a raddle and packing material PRIOR to threading your heddles would be a much better method to assure success. That way you have your warp threads evenly wound on the warp beam and not moving anywhere when you pick them from the cross - in the proper order - and sley your heddles. 500 heddles on a 36" loom is certainly not too many - and when your heddles are sleyed, you can easily put your threads into your reed.

In the future, I'd suggest using LUndell's "Big Book of Weaving" or Joanne Hall's "Warping Your Loom" as a guide to successful warping.

Submitted by LindaJ4201 on