Hello,

I was recently given a Good Karma loom and would love any information anybody has on it. I am just now starting to dig around online, but you all usually get me an answer before I can hardly start researching! It seems to be in really nice condition- all the harness/shaft sticks are in good condition, the connections are strong, the cloth bea/tensioner(?) stays tight. I am just missing a wedge on one side which I assume is for a warp beam holder? Again, any help or information is really appreciated. And of course, some pictures:

     

The last photo shows the one wedge. There is no wedge on the opposite side.

Outside dimensions measure 7 inches high, 20 across and 36 long (18 x 51 x 92 in centimeters).

Thanks in advance!

Comments

sarahnopp (not verified)

So far I have found four references to Good Karma looms:

Weaver's Friend has a note about the manual and instructions, but no link. http://www.weaversfriend.com/page1/page6/page6.html

From their information, I was able to read the obituary of the loom creator.

I also came across this fun blog post, with photos of one warped up! http://theworkisgettingtome.blogspot.com/2011/12/loom-wrestler-part-i.h… her comments section: "I warped the loom absolutely wrong, it is supposed to have a stationary warp and you just weave something little and tapestry like. I'm really not sure. There were no instructions so the technique was improvised."

The last reference I have found is a comment on a project posted on Weaving Today. So I have a note in to that person.

But that is all. So... I am hopeing someone out in Weavo-land will have something they can share :) Also, I will be asking around my guild.

sarahnopp (not verified)

I have still not found much online about anyone else using a Good Karm Loom, but I did get some additional information at the http://theworkisgettingtome.blogspot.com/2011/12/loom-wrestler-part-i.h…, which I am quite grateful for. One of the people who used to make these looms spotted my comments and provided a bit more background for me.

As far as warping, it is still naked, but I am getting lots of lovely ideas from Katherine Larson's "The Woven Coverlets of Norway", in her section on rolakan, or square-weave. She describes this type of lom as "two-beam".

I think I may actually use it for demonstration purposes at the County Fair this summer.

sarahnopp (not verified)

Someone emailed to ask if I knew more about this loom. I do not, but I did renew some searches and found an ended ebay auction of one in the box:

http://www.ebay.com/itm/Vintage-1977-Good-Karma-18-Continuous-Warp-4-Ha…

If you click on the photos (about halfway down the page), you can zoom in and even read a bit of the print material it came with. Interestingly, I just noticed that it only came with a wedge on one side. I always assumed mine was missing one, but apparently not. And I see only one wedge in the photos of the links I posted earlier too. 

Doesn't it seem like 2 wedges, one on each side of the frame, would be more secure? Assuming this is where a warp tensioner thing goes. Maybe not? Any ideas?

sarahnopp

I Weaver's Friend was able to supply me with a copy of the instructions for this loom. That is such an excellent resource! I highly recommend checking her site out if you ware looking for information about this loom, or many others.

I figured most people are probably stymied by the warping path, so I have taken a (crummy) photo with my phone to share that page with you all. The instructions actually show three warping path possibilities! I hope this helps people get started. But I do recommend ordering a clean copy of the instructions, as I find myself puzzling over them a bit.

 

Submitted by Anonymous (not verified) on