I just completed an experimental sample using high twist fine wool combined with a fine linen singles.  I LOVE the resulting texture but the linen was a bear to work with.  I tied the warp to an existing one but had considered using two beams - one for the linen and one for the wool as the linen needed tighter tension (some humidity may have also helped).  The wpi of each yarn was approx 60-64, I set the yarn at 32 epi which gave a perfect weight fabric with the differential shrinkage, however the slight slub of the linen caused breakage during weaving, the linen is (as I expected) wirey.  Question: should I size the linen warp and would this help it be better behaved? and or should I beam on separate beams.  Would a 2 ply linen be easier to work with but would it yield the same hand?  I have yet to size a linen warp so guidance would be appreciated.

I am so pleased with the resulting fabric I would like to create more (but with less headache).

Any suggestions appreciated.

Dawn

 

 

 

 

Comments

Sara von Tresckow

Sizing linen is always a good idea. Even if you do not have breakage, the abrasion in the reed is enough to leave your fabric "shopworn" before you even wet finish it.

Simply soaking the warp chain in a solution of liquie laundry starch and water will offer nice protection. A starched linen warp then becomes smooth, not at all tangly and on of the easiest materials to beam.

kerstinfroberg

a 2-ply will never give the same result as a singles will... maybe still nice, but different.

Kerstin, slightly biased ;-)

Sara von Tresckow

Kerstin,

You're not biased - I feel the same way.

Dawn McCarthy

I have still yet to weave with plied linen, it just doesn't feel or seem it would act the same way.  I love the crisp sheen of single ply.  Thank you for your guidance ladies.

Dawn

ReedGuy

I will have to remember this tip. I want to try some linen some day for a warp.

lasselasse

Hi. My 17/1 is on the loom already and I experience a lot of what you are reporting/predicting, most of all the "shopworn" look. I read somewhere that I can paint the sizing onto the warp when it's on the loom as well. Does anybody have any advice and or a recipe? Could I maybe even spritz the sizing on the warp?

Thanks in advance,

Lasse

Sara von Tresckow

At this point, get a can of spray starch at the grocery and spray that on the exposed warp. Let dry. Weave the sized area. Next time try sizing the entire warp.

danteen (not verified)

I've used a single linen warp and began having it stick together as I began to weave so it was already on the loom.  Made the flax seed sizing Sara mentioned somewhere. I used a sponge to put it on the streched warp from behind the heddles to the back beam.  Kept doing that as I wove. Disclaimer, I have a good distance on my TDL behind the texsolve heddles so a little dampness did not hurt anything.  Though you could wait for it to dry each time.  You might want to lift the linen warp away from the wool as you do this, not sure.

Boil 2 T. flax seeds in a cup of water till it is like egg whites.  Strain, cool, use, keep in fridge.

Sara von Tresckow

I do NOT recommend flax seed sizing - I use exclusively Stao-Flo liquid laundry starch. It is easy to use, washes out with just water and is not using precious seeds for a warp dressing.

Traditional European linen weavers used potato starch cooked out of potato skins. Rice starch also works.

If the warp is already on the loom, just go to the grocery and get a can of spray starch for this project.

Queezle

I've been lurking in this thread, and wondering what it is that makes the singles better than using a plied linen thread.  I would love to know.

danteen (not verified)

Oops, sorry, Sara.   My memory did not serve me well, but I used this at least 4 years ago and thought it came as recommendation from you.

I think the starch, would be a lot easier to get and apply, and keep better also.

Teena Tuenge

Submitted by Dawn McCarthy on