Am putting heddles onto 5-8 of my leclerc floor loom.

is hint or clue on how to add the heddles on to make sure they go on the correct (same) way? All the eyes going the same way? Please help I did take the harness frame off - so I got that far thanks Becky PS my goal this year is to add 5-8 on and then 9-12 on later this year

Comments

patweaves

Madelyn van der Hoogt, former editor of Handwoven and founder of the Weaving School (which I attended last summer - fabulous!), writes a column for weavingtoday.com and answered that question as follows:

True confession:  It is good to have them organized, but most of mine aren't!

The deal is that the heddle eye is slightly slanted in relation to the shaft itself.  The most convenient threading position for that slant is a certain direction if you are left-handed or the other direction if you are right-handed; this direction is the opposite depending on whether you thread the heddles from front to back or back to front.  It also changes if you turn the heddle "upside down."

So in theory, all your heddle eyes should be slanted in the direction best for you when you thread the loom using your method.  That can mean that that zigzag part of the heddle can be on either the top or bottom depending on how the eye is slanting with that orientation.

I hope this makes sense.  What I'm trying to say is: figure out which way the eye works best for you and then place all your heddles that way.  Or, do as I do and not as I say and just let them be however they are right now.

Elk Ridge Orch… (not verified)

oh my goodness my problem is that the heddles were just handed to me a handful so they arnt all nice and stacked in one direction or another so do I lay them all out on the dinning room table and look and restack them? OMG

Dena (not verified)

It depends on the kind of heddle. The flat steel ones generally have one end that is truly flat and the other has a crimp in it. As Pat said, figure out which is best for you, depending on your dominant hand and line up with either all crimps going in the same direction. If they're wire or inserted eye, they often have a colored mark on one end to align to.

True confessions..I'm also terrible at this and my heddles go every which way on my twenty-odd looms. My fantasy is to take a day or two (in my spare time!) and make them all go in the same direction.

One more thing...one of my students turned me on to the fact that you can use package strapping to store your unused heddles on. It's flexible and the perfect size so it's easy to slip them on and off the loom.

Elk Ridge Orch… (not verified)

thanks for advice - I have never seen that before

Elk Ridge Orch… (not verified)

they are wire ones heddles and they are every which way. I am trying to be good and put them all on the right way and I dont see a mark on either end :/  

coastalgal (not verified)

I use the long stitch holders knitters use. As I put the heddles on I align them...then when they are needed on the heddle bars, all is in good shape and they slide onto the bars easily(most of the time!!) These stitch holders come in various lengths and are great for storage of heddles, be they Texolv or metal. It beats the 'pick-up-sticks' disarray I've had before. 

sequel (not verified)

First look for paint residue on one end of the heddles.  When they are new, they usually are painted green at one end.

If you look at the twist on the heddle wires at the "neck" near the top loop you will see that it either goes upwards from left to right or the opposite, and one side has the tab end of the wire.  Choose one end to look at and make all of them match... 

Take one set of your heddle bars out of the frame, lay it out on the dining room table and use it for mounting and aligning the heddles.  I start with the tab on the first heddle and place it to the back.  Then align all the following heddles to match the first one.  Once you get them lined up, you will begin to see the direction of the heddle eyes.  Flip or rotate the heddle bars with the heddles on them so that the heddle eyes are in your preferred direction - opening facing right for right handers and left for lefties.

Once you get enough for one shaft, run a long string (I use a flat steel heddle or tapestry needle to do this) first through all the upper heddle bar openings, then down the side of the heddle group, through all the bottom heddle bar openings and tie the end to the beginning snugly.  (If you were using flat steel heddles, I'd say thread the ends through the heddle eyes before tying off.)  Now you can slide the group off as one and move it to the proper shaft.  Leave the string in place until you are sure you've caught all the heddle bar openings on the heddle bars.  If you are removing them from the loom for storage, mark the string ends with a piece of folded masking tape with the number of heddles in the group.

I know lots of weavers don't care if their heddles are a mess, but I do.  It makes it so much easier to check for threading errors if everything is in apple pie order.  There is a special place in hell for people who just toss heddles in a pile and sell them to the unsuspecting...

 

 

 

sally orgren

On new-to me looms, the inserted eye heddles come alternating flat and wiggly ends on each bar, although the eyes all slant the same direction. Not sure why—easier to flick along the heddle bar with this itty bitty bit of space between?

For corralling and moving heddles, I use the plastic packing/straping tape that comes on larger or heavier boxes. (Like on a case of copier paper.) I cut the end at a slant, and the heddles feed right onto the thin flat plastic strap. This works much better than string, which can leave the heddle row sort of floppy and hard to slide onto the heddle bar.

I do the top and bottom, it holds the heddles rigid. Then you can slide that plastic strap against the heddle bar, and the heddles seamless slide over into position. I keep spare heddles on these plastic straps, taping the ends to keep them from sliding off when not needed.

And yes, I have sorted a heddle pile more than once so far in my weaving career. Why not make a party of it? Decide on your method, provide refreshments & instructions for corralling the heddles, and have fun instead of frustration.

Cheryl'B

I have found myself needing to put more heddles on the shafts for a baby blanket.  Not knowing it was such an important thing, when I got my loom it had oodles of heddles and I took some (a lot) off as they always got in the way.  Ugh....now having to put them on I wasn't sure what the heck I was doing.  I have the wire heddles that are oh sooo confusing.  However, I think I'm getting the hang of it (with the info from this thread).  Now, as I am straightening all of the loose ones up do I take the mixed ones off the shaft and start with everything straight?  That is the question.  

laurafry

Ultimately will will make things easier for threading if the heddles are all lined up in their proper position.  But it's a personal preference thing.  :)

cheers,

Laura

Cheryl'B

I could hear it in my ear......you should make them all straight!  That's what I was thinking and yes, it's probably the right thing to do.  So, I will do the task and make things right.  I think while things are apart I may as well take the time to give it a good wipe down.  

 

Elk Ridge Orch… (not verified)

so  am sitting in front of the idiot tube and threading all my heddles on to large stitch holders that I use for knitting

laurafry

Stitch holders are great for this job.  :)

cheers,

Laura

Submitted by Anonymous (not verified) on