Do I try to weave a throw blanket double-weave on my 36" 8H loom, or do I wait for a wider loom?

The tentative game plan....2/18 Jaggerspun zephyr (50 silk 50 wool) sleyed 24 (?) epi for a twill yet to be named. I'd like the end product to be on the light and fluffy side, and it doesn't need to be super warm. When you sample for a project like this, do you sample the full width? Do you think I should do a practice throw to get the technique down (I have some freebie rayon chenile, but it seems a bit weak to use as warp)? Should I be considering a different kind of yarn altogether? Should I just forget this for the moment and make another scarf? Should I just soothe my anxiety/indecision with ice cream? Oh please help wise ones!

Comments

Erica

Wendy,

You've obviously be thinking a lot about this blanket. I have had great fun weaving double weave in all it's variations. If you haven't done a lot of double weave and you decide to go ahead with the double width, I would suggest you put enough warp on to practice at this width. The biggest challenge with double width is getting an even shed and ensuring your weft does not go into other layers.

Sleying at 24 epi, to weave at 12 epi per layer, is not that bad to work with, assuming the Jaggerspun zephyr is not overly sticky. I would be cautious about which reed you use for this. A 12 epi reed should be fine as you'll only have 2 threads per dent, but an 8 dent reed may lead to problems.

I hope this helps and I look forward to reading what other folks say on this topic.

Cheers,

Erica

Joanne Hall

Maybe a good way to start would be to order a blanket kit.  I did a lot of research when I designed my kit, weaving many blankets in both plain weave and basket weave.  And, I changed the sett and the reed more than once.  The kit will assure you of  getting the right yarn and sett and will give you success with your first blanket.

[email protected] 

Cally (not verified)

Are you proposing 24 epi altogether or for each layer? 12 epi would be very open for a twill with Zephyr. I typically use 20 epi for a single layer twill when I have Zephyr in both warp and weft, though 24 epi would be good if you had a somewhat finer weft yarn. It does make a lovely light, but warm, fabric.

Zephyr is an expensive yarn and 36" width at 40 epi or so means you'll be using a lot of it. I would definitely sample first! Perhaps start with a small single layer warp to establish the finish you want and then go for the big warp with extra for sampling and practising the double width?

Cally

WendyB (not verified)

Thanks everyone!

The kit sounds like a safer option, but I have this yarn my husband bought for me when we just got married, and I wanted to use that. I was thinking 24 epi for each layer, 40 total sounds even better. Thanks for the sampling advice. I have some leftover yarn from a different cone that I could play with. I can get so stymied at the beginning of a project...so many possibilities and questions. I'm glad I just asked.

Sara von Tresckow

I'm currently weaving with zephy on my drawloom - 30 epi for a satin - and it is certainly not stiff, but very drapey and light.

This is very tender yarn, lovely, but I question using it for a double width throw - the doubleweave blanket thing is really attractive until you've done a few and then discover that you can do lovely almost imvisible searming at the selvedges - possibly even a decorative stitch with the silk/wool blend. With such precious yarn, I'd also consider doing the throw with vertical design elements (no matching later) in two single panels, seaming them after weaving. You always see a trace of the fold because of the way it is created and catching the wrong layer is not easy to mend invisibly.

Erica

Wendy, I definitely recommend practicing and sampling before using precious yarn, especially yarn, which essentially can not be replaced! I can certainly understand being excited about a project and having so many decisions to make you feel you'll never even start. Remember once you start making decisions, you've started. Believe me I've rushed into projects before without sampling and the results were not good! The added bonus to sampling is you learn so much! The amount I've learned about weaving since I've started sampling is simoly staggering. Best of luck, I look forward to following your progress! Cheers, Erica
Submitted by Anonymous (not verified) on