Hi

I've had a rigid heddle loom for a couple of months and I've got the weaving bug! I bought a folding floor loom on ebay last week and now I'm not too sure of the best way forward so help!!

What I've bought (rather surprisingly) is a 32" 4 shaft folding countermarch floor loom, with an overhead beater (10dpi). The tie up is a mess, and the heddles are cotton and very old. The whole thing needs a small amount of tlc but probably has a lot of potential. So.... Do I invest in texsolv, spend lots of time cleaning, mending, replacing bits etc - or do I just get an 8 shaft table loom?

I just don't know what the most sensible thing to do is - I might have accidentally got a loom with tons and tons of potential, or I might be wasting my time - it was really cheap and I didn't realise what I was getting. 

Any help and advice would be really great

Comments

Smudge

Ooh - I'm the lady in UK who emailed you earlier about buying your books!! 

I guess there is a lot more detail in them than even the page you directed me to? I'm the kind of person who wants to understand every single tiny detail fo what I'm doing - I think I need to order the books!!!

Claudia Segal (not verified)

Definitely buy Joanne's books.  They are worth the price and more!  I have owned my first countermarch loom (4th floor loom) for 4 years and I would be lost without Joanne and Laila Lundell's Big Book of Weaving.  

It looks like you may have a real find.  Just a little tlc and it'll be fine.  Four shafts are great and you are far, far better off than with a table loom.  I have never found a table loom useful for more than workshops and samples.  It's no fun to be raising shafts with your hands and it's murder on your shoulders if you are weaving with fine yarn.  

This is just my opinion.  Others may feel differently.  Keep posting if you need more help.  

Claudia

Smudge

Thank you - can I please ask more??

I think I'd like to weave fairly fine things - would I be able to do that on something big like this? I had thought I needed a smaller table loom but maybe not? I don't want to have to only weave big things - I do have a Knitters Loom for really simple stuff, but I wanted to do twill and fine cotton, and maybe even some silk - would this big loom just be too ridiculous for something like silk?

I think I wouldn't have bought it if I'd realised but it might be the bargain of the year! (or not)

Thanks

kerstinfroberg

On a wide loom you can always weave narrow warps - while it is possible to weave double width on a narrow loom it is not always fun - and it always takes double the number of shafts. (Thus: on a 4-shaft loom you can only weave two layers of plain weave)

On a heavy (sturdy) loom you can weave anything - on a flimsy (or lighweight, or table loom) you can never weave things that require heavy beating (like rugs, for instance).

On a multishaft loom you can always use fewer shafts - even if it is possible to weave any complicated structure using pick-up.

A coarser reed can be sleyed with multiple ends per dent (the most I have used is 7) - while a fine reed only can take fin(er) yarns.

I could go on :-) My conclusion: bigger is better (and countermarches rule)!

Have fun!

Claudia Segal (not verified)

Amen to all Kerstin wrote.  I have woven wool rugs on my 47" countermarch and I have woven silk shawls.  It's a great loom.  The treadling is excellent if you face any back problems and it's quiet.  

Claudia

celtinbirks

It looks like a nice little loom, and much better than a table loom for weaving on. I hope you got a good deal. I haven't seen one like it before. What brand is it?

Joann's book "Tying Up the Countermarch Loom" saved my sanity. I would recommend it over "The Big Book of Weaving" for learning how to tie up a CM loom. I hope that you got a good deal. Because it is a folding loom, you might not be able to weave very heavy things on it because the frame probably isn't as strong as a rigid framed loom.

Congratulations and have fun!

Sara von Tresckow

For what it is worth - your loom is a Lervad Number 11 folding countermarche loom. They were built in the 1980's and came only in this configuration. Construction should be mostly beech which will make it fairly sturdy.

ReedGuy

If it's of hardwood like beech or maple, you could free stand on any piece of that loom and hardly bend it. You'd have to do some jumping to bust it. :)

Weavingholiday

Apologies, I am new to this, not sure how I ended up here.

Smudge

Thank you all for your help.

This is actually a Lervad 9 - I still have the sales manual (though sadly not the tie up instructions!) 

In a fit of pique I cut all the old tie up off today and started from scratch - its not perfect but it is at least weaving and I think I might just love this loom!! I invented my own bad and unique way of warping, tied it up best I could and got going on a plain tabby weave. I'm going to buy texsolv tie up cord and heddles this week though - they will make a real difference. 

I haven't bought Joanne Hall's books yet as I'm in the UK and they'll take forever to arrive with the Christmas post - but I've ordered the big book of weaving which will help and at least I'm starting to understand the idea of countermarch. Thank you for encouraging me - this is really exciting now!

hpoullard

Lervad are nice. My parents got their first Lervad loom n°9 in 1968 in Paris and then it was very liked in the whole France. It was very often sold.

I still keep one.

Leslie H

I was given a Lervad 9 (like the one pictured at the top of this thread), and I have it tied up for plain-weave and everything works.... except that the harnesses sag so much, the warp is deflected down...which means that the threads that are supposed to go down are already resting at the bottom of the reed and the shed won't open fully. The threads that are supposed to go up do so just fine. I believe if I could get the shafts all up higher so that the warp is in the center of the reed (and of the heddle eyes) I would get a proper shed. I have been fiddling with all the tie-up cords for days, a hundred combinations, but can't improve anything. I believe the problem is simply the sagging shafts, which is somewhat alleviated when I apply weight to the lower lamms (hanging temporary blocks of wood from each of them). I do have all six treadles tied up, but it's not enough weight. A single extra "mock" treadle is also not enough weight. I will probably have to figure out some way to weight the lamms further, but what I'm wondering is, how did this loom ever work in the first place? The hand-tied heddles (some of which are stretched out) are 11 inches long. I don't see that shorter heddles would solve my current problem, but if anyone thinks different, I would love to hear from you.

ReedGuy

Is there anyway to lock the jacks? It seems in the photo up top that there are locking pin holes drilled into the frame at least, and probably on through the jacks. The see if the lamms can be tied up level and see that the cords from the upper lamms to the shafts are even lengths. Then you will likely need to tie the front holes of the treadles first to the lamms to get the desired height, with each successive lamm toward the back tied up with a little more slackness than the previous. This because your treadles incline so the range of motion on the back shafts is more than the front ones. The slacker cords back there allow the treadle to lever more before the lamm moves. Looks like the treadles are hinged on front. See how that works. Remove the locking pins when your finished tying up and see how the hsfts behave. They should not move much, if any.

Smudge

Actually I ended up selling this loom and now I have a Louet David - much better!!!

ReedGuy

I was responding to the previous poster.

Leslie H

Thank you, ReedGuy, for your excellent advice. That finally did the trick! I am so happy, so relieved...you name it. The problem is FIXED and my frustration is GONE. I had used the locking pins before while tying up, but this time in following your instructions I also discovered that the cords from the jacks to the shafts were not even lengths, so I fixed that too. I now get beautiful, wide-open, plain-weave sheds and have woven a few perfect inches, smiling the whole time. Thank you for helping me make this work--you've done me a great favor and have absolutely made my weekend.

Leslie H

Smudge, if it weren't for your original post with picture I wouldn't have known where to go for help. (I found your post while doing a desperate google search.) I'm so happy to have found this site. 

ReedGuy

That's why Erica and Oliver pay me the big bucks. Can I ask for a raise? ;)

pammersw

Let's see, zero plus a ten percent raise is...still zero! But you do give great advice. :)

ReedGuy

You're an early riser pammersw there in the SW. Sun is just rising here in the east. :D

Submitted by Smudge on