I have 2 looms that I am trying to get information on (price, missing pieces, etc.) and I don't know much about them. I'd like to get them appraised, but don't know where to begin with that process either. I would appreciate any insight or help.

Comments

sarahnopp (not verified)

First thing to do to get help from this site is upload large photos to this trhead, showing different angles and pieces of the looms. Look for makers marks, of course. But photos are the first thing anyone here will need in order to help you.

Also, if you trying to get them appraised, you will need to share where you are located> Please keep in mind that appraisals have different purposes, which can impact the valuation, for example the replacement value if replacing with similar but new, or exactly the same antique.

rarnold

the first 3 photos are of the first loom (which i believe is a table loom). It has a leather label on it that says "Tools of the Trade - Fairfax, Va". And, the other 9 photos are of the second loom (which i believe is a floor loom), but has no number or name on it anywhere.

sequel (not verified)

The first loom is indeed a Tools of the Trade table loom, which I thought was made in Vermont, not Virginia.  The second is a Gallinger loom which is no longer in production but was made and sold exclusively at The Mannings in Pennsylvania.  It is a 4 shaft counter balanced loom which obviously need to be reassembled, and probably needs new belting.  It looks like all the parts are there.  The Mannings no longer makes or sells this loom and cotton belting is available at fabric stores.  You may get a little helpful advice on re-assembly from the Mannings... they still use them in a lot of their classes.

rarnold

Wow, thank you very much. That is a huge help. Where would you recommend me finding out how much they are worth? Thank you again for all the help!

Joanne Hall

Since these looms are made by companies which no longer make looms, the value will be low.  If you can get them assembled, put a warp on them and weave on them, then they will have a little more value.  A buyer needs to be reassured that all the parts are there and that they do weave well.

Joanne

rarnold

I don't weave, so I really wouldn't even know where to begin. I would like if I could get a hold of someone to stop by and either test them out, or possibly look at them and give a ballpark price. I haven't been met with such luck...

Joanne Hall

the value would be less than $100 each.  Just a guess, but it takes a very talented weaver who might also need to be a woodworker to get these looms up and weaving.

Joanne

sally orgren

Usually there was a number attached to each loom on the leather label. Does yours have a number in the leather too?

Daryl Lancaster has several TOTT looms, you can ask her about history. I believe the metal parts (brakes) were the same as LeClerc looms, so replacement parts might still available, but please ask her for sure.

There is currently someone selling a small TOTT here on the Weavo forums, so ask them for more photos of their loom to compare to yours before it is sold.

The value of looms "parts" is pretty hard to assess. Assembled with a warp for someone to test drive is the best way to sell a loom for the greatest value. In general, it seems smaller used looms seem to hold their value better than the bigger floor looms (particularly jack floor looms over 45" wide). 

sequel (not verified)

I can tell you that the Gallinger, if in perfect condition would only be worth about $300 - $400.  Where are you located?  We can't come by to take a look if we don't know where to find you!

rosslyn lyall

 Hi I have a Le Clerc floor loom - possibly Colonial which has been modified to semi automatic by David Thorpe New Zealand (now deceased) It uses a DOS computer program that incorporates a printer. The loom is 60' wide, has a sectional warp, 12 shafts, and uses a noisy air compressor to power it. I have now modified it to include shaft shifting (but have not used this yet) and I want to be able to manually weave without thecomputer program. The lams have been taken away ( I suspect) and also the pedals. I have made new pedals (albeit rough) but don't know how to operate  it manually without the lams. Can any help? I have a problem with operating the computer either manually for reasons given or  by the modified computer system. The air compressor is very noisy and the DOS system is old. I am missing the plugs that had connected the computer to printer. I have tried to buy replacements and have been sent twice the wrong ones. I am a novice but extremely eager to get weaving. The modifer has died and the person I purchased the loom from interstate and in ill health. Thus trying to get information to get my loom going is like learning a new language. Can anyone please assist? It would be much appreciated! Rosslyn Lyall

rarnold

sequel - I am located in Pennsburg, PA. That would be a huge help, and I would very much appreciate it.

sequel (not verified)

You are a lot closer to The Mannings than you are to me.  They are in East Berlin PA.  You could go over and take a look at the Gallinger looms they have in use there.

I'm in Richmond, VA and not likely to be in your neighborhood anytime soon.  Anybody out there who can help this person?

 

sally orgren

Dang! I was just in Allentown last Thursday and didn't catch your post. I may be getting back to that area. I will let you know. I am in Northwest NJ, so Allentown is about 1.5 hours from me. How far are you (driving time) from Allentown?

sally orgren

Rosslyn, 

Have you woven before on a non-computer assisted loom? I think you'll need lamms to operate the treadles without the assist. Laila Lundell's Big Book of Weaving may have the illustrations you seek for proper configuration.

You might also consider joining the Yahoo.com group WeaveTech. There are members of that group who are loom, computer, and software savvy.

However, you mentioned being a novice (but not sure in which area), so the difficulty I see is that it might be like learning three different languages at the same time: weaving, your loom hardware configuration, and the software issues. If I were you, I would start with the loom hardware, make sure the loom works manually with a warp on it before delving into the computer part of it, unless the former owner is back on their feet and can guide you through their specific modifications.

With the loom, take photos as you go! That allows you to go back and reinstall something if you made a mistake in the adaptation, or post or compare your loom to others of similar build.

I hope someone with more experience can chime in here for you!

rarnold

I am located about 25 minutes Southwest of Allentown. If you're ever in the area, that would be great. Thank you!

Submitted by rarnold on