I've had foot problems the last few years, and now can only wear sketchers type shoes - at least if I plan to, say, walk.   But these are much too bulky and slow to weave with, so to weave I use more of a slipper type shoe.  But it doesn't take much weaving for my feet to hurt, and this time of year, to get very cold.

Anyway, does anybody know of a way to rig my floor looms to use hand operated treddles?   I'm thinking that there must be people in wheelchairs who have looms that have been modified to operate by hand. 

(Please don't suggest I used a table loom - my draw loom would not fit on a table!  I love my floor looms and want to keep using them, just more hours a day than I can manage with these feet of mine.)

 

Comments

ReedGuy

I have just the opposite going on. My feet are always too hot. :) I don't know how you would opporate the treadles by hand though, need them to weave and beat. Maybe someone else can offer some help.

Cheryl M White

Sally,

I feel you pain, as I too have had problems mostly with arthritis and I have always been a bare foot weaver!!  For a while I thought I was going to have to stop or limit to a short time.

While I don't know how to modify the loom, I have found that keeping my feet warm helps tremendously.  I have started wearing support knee highs as I had some swelling issues and they also keep your feet warmer.  I also have some really thick hand knitted socks a friend sent me from Maine, (they are all wool) and that really has helped.  I find that I can treadle longer.  I also use the crafters gloves which are like support hose for your hands minus the fingers, and they really help as well as my fingers and hands get stiff.

I realize you may have some other issues, but maybe this would help the cold part at least,

Cheryl

 

repweaver (not verified)

Hi, Sally

I have this problem from time to time when I grow careless. Then I concentrate to retrain myself to take care not to twist my ankle or treadle with the wrong part of my foot. This seems to solve the problem for me. Foot pain is most usually a problem when I am using all of my 10 treadles.

RepWeaver

ReedGuy

I might add that I wear wool socks year around. I buy Wigwam. They are in the stores here in New Brunswick and in Maine. The type of knit in them has loops inside the sock. I've come to the realization, no matter how active you are for exercise as I do, when you reach 40 stuff changes regardless. :) Yesterday I walked 6 miles and today I was pole pruning in my woods.

SallyE (not verified)

My problem, according to my foot doctor, is some sort of internal cyst in the balls of my feet, so it's the pushing down without support that is the problem.  That's why the "rocker" shoes work so well - they move my weight back from the balls of my feet.

I try to remember to push with my heals, but don't remember often enough and the back hinged treddles aren't exactly built to make that work well.

I think keeping warm would help a lot.   Maybe I can see about slipping some sheerling into the slipper / shoes I wear.  That would also create more of a sole for the shoe.

 

 

mneligh

Have you tried wrapping your foot & ankle using an elastic bandage or a horse leg wrap?  Wind it (over wool socks) in a figure 8 from the ball of the foot to the opposite side ankle, around the ankle, and back down around the ball of the foot.  You may have to experiment whether inside to outside or vice versa works best, but it does matter.

dweaver (not verified)

getting some somewhat ridgid shoe insoles, trimming them to fit and inserting them inside a pair of thick, wool socks. It works quite well.

SallyE (not verified)

I just lined my slipper / shoes with some sheerling I had, so we'll see.  If they are still cold, I might slip them into some cut off wool socks.

Liese (not verified)

Hi Sally,  Foolishly I tied up the loom so that I had to weave more with the left than right.  We had some insoles in the closet and I finished off the last few yards with one folded in half inside my left weaving sock. It helped quite a bit.  I think Laura Fry uses some form of ballet shoe, this was mentioned long time ago on another weaving forum about weaving shoes.

debmcclintock

What about padding the treadles?

Sara von Tresckow

I swear by handknit wool socks and MInnetonka double softsole deerskin moccasins.

With your drawloom, you shouldn't have that much difficulty - if you're using satin ground structures, by tying on ly one shaft going up and one going down, the action of your loom becomes even easier.

SallyE (not verified)

You are right, Sara, the drawloom is really easy to treddle.   My aches probably say more about the state of my poor feet than then how much I have to push the treddles!

I lined my shoes with sherling and just picked up some leg warmers, so we'll see how much that helps.   I do have some moccasins, but they are too wide to use with the treddles.

Slipstream (not verified)

Air cylinders attached to your treadles could be operated with switches and a solenoid air valve. The switches could be push button type that you could mount in series on your beater and that way you could operate your treadles with the push of a finger on an area y ou normally handle anyway.  The conversion would require the use of an air compressor which cold be located anywhere so you don't have to hear it! this method wuld allow you to eaither use the air system or the treadles individually and would minimally alter your loom.

Regards, Charles

steve104c (not verified)

What make and model loom do you have? Maybe someone here on Weavolution can ( me included ) come up with a solution. A picture would do wonders...................Steve.

sandra.eberhar…

Kessinich makes floor looms with hand operated treadles for people who can't work treadles.  I don't know the mechanism for this, but it couldn't hurt to contact Bruce Niemi through the Kessinich website.

dibgar

While this won't help many of you, if you do have a compudobby loom, this could help.  AVL makes a hand operated switch for its compu-dobby looms.  It is a thumb-operated switch that attaches to the beater. 

I was having serious problems with my ankles, so I sought this feature when choosing my loom last year.  Fortunately, my ankles are better for now, so I have not attched the thumb-operated switch yet, but it is there for me if I need it in the future.  At least for now, I can manage the single e-lift treadle, especially if I shift it periodically so that no one foot does all the work.   

As I said, this won't help those without an computer-assisted loom; but for those who do have one, this is an option that I was pleased to discover.  I did not find it in the catalog, but I was able to order one by phone. 

SallyE (not verified)

My feet seem to be a little better the last few days.  I was working on my drawloom and doing some extra tedious in-lay on the pattern.   This required me to hold the treddles down as I did it.   After a few days of this I got tired of the slooooow process and, for a change, started weaving on a warp I had on my Macomber.     Surprize!  No more foot problems!   I guess it was the holding the treddles down that was getting to me.   So, I think if I just switch off now and then I should be Ok. 

Thank you all for your help and support.   Weavolution is a wonderful community!

 

ReedGuy

Sally is the weight you put on the treadles heavier than just the weight of your leg and foot on it? For long periods, that could cramp anyone's foot if you have to put additional excertion onto it. That would cause me to get Charlie Horse in my toes. :D  I think this has been discussed a few times on the forum.

Just wondering

SallyE (not verified)

I was probably pressing harder than I needed to, just from being nervious about the process I was doing.

 

debmcclintock

Are you aware of treadle gates? Both Cranbrook and Harrisvilles have them, they are invaluable when you do inlay or hand manipulated pick up.  You depress the treadle and lock it into the treadle gate slot.  They are nice for spacing your treadles for regular treadle use and work well for locking your treadle down for use for slower hand work.  Here is a link to a photo within weavo in another thread. (let's see if a specific message link still works - it used to)

#15

I am well aware that some folks do the treadle dance and do not like treadle gates but they do have a place in weaving and folks should at least be aware of them.  Especially when there are physical constraints in place.

SallyE (not verified)

I do have a treddle gate, but not with pieces to lock the treddle down.   Interesting idea!   Thanks!

 

Submitted by Anonymous (not verified) on