I have some yarn that I want to use to weave a twill in wool for a basic mid length pencil skirt. I've looked at patterns and the width they require is 45" smallest. While I can weave 45" that leaves no room for take up or shrinkage. Could I weave for the skirt horizontal (epi) on the loom for the length of the skirt plus hemming and weave for each panel of the skirt? I can sew, however not very proficient at creating my own clothing pattern. I was going to try to use a skirt I have as the base of the pattern. Or if I wanted a longer skirt can I weave each panel vertical (epi) and continue weaving that as long as needed for each panel? Any and all suggestions are appreciated! I'm geeked about getting this warped......

Comments

alene

Cheryl,

Pattern companies give yardage for commonly available fabric widths and assume the pieces will be cut with the fabric folded lengthwise. Rarely is the entire 45 inches in width needed.  Also, it is easy to cut each piece separately on unfolded fabric. Then one only needs as much width after shrinkage as  the widest piece. Basicly  your idea of weaving  each panel vertically.

I suggest getting the pattern you want to make and laying the pattern out in possible cutting placements, then deciding how much fabric you are going to weave.  After figuring out how much yardage I seem to need I add on the length of my longest piece plus shrinkage, just in case of errors in cutting.

Alene

 

Cheryl'B

Thank you very much for your advice!  After reading it is all coming together in my head...(a lot of space in there).  Does anybody ever feel like calling in sick at work to stay home and weave? 

ReedGuy

No because it doesn't pay the bills to sit home and weave. No work, no pay. LOL :)

Cheryl'B

Dang I totally forgot the bills keep coming... :)

endorph

pay the bills but there are days when I am tempted to stay home "sick" to weave! But I would never actually do that  ;-)

ReedGuy

Well, I'm happy now. I just received my reeds from Camilla Valley via UPS, so I can sley the 16 dent one for some towels (32 epi). I hope this unmercerized cotton is decent. 640 ends.

Cheryl'B

640 epi........sounds like fun. Hope you take pictures. How about a vacation day to stay home and weave. I think that needs to be arranged :)

Cheryl M White

The advice Alene gave you is excellent.  One other tip that may help.  Before you weave your precious handwoven fabric and cut it, take a piece of cheap fabric, and try the pattern pieces on a width you think you might wind up with as finished width  (after draw in shrinkage, fulling etc). Then you can play with pattern lay out and see just how long it needs to be. If you don't have fabric around, somewhere like Wal-Mart usually has cheap fabric, the remnant table at a fabric store or even thrift stores.  You can even roughly sew the skirt together to see if you like the way it fits.

I would recommend you plan to line this skirt.  It will hold its shape much better, and will also feel more comfortable.

Good luck

Cheryl

Cheryl'B

Thank you! Great advice I will heed. Now to get off work and go to the store.

ReedGuy

Yes Marden's and Joanne's have tons of cheap fabric also.

ReedGuy

Oh, and I will be do doing some wool fabric sometime for a shirt as soon as I can get my hands on fine stuff to thread at 48 epi. I will be making a wool coat also, but single ply wool and wool fleece stuffing will be used. Still got some thinking to do there. ;) Also, I've got to experiment with polyester, this time for lining. I have a much larger project planned next year for the polyester, so good to practice with it. :)

tien (not verified)

Hi Cheryl,

I have a 24" loom and do clothing yardage all the time. Because most patterns are designed to be cut from 45" folded lengthwise, the widest pattern pieces are typically a max of 22" wide, which works just fine on my loom, even after draw-in and shrinkage. You do want to check your pattern, though.

Even if your pattern layout calls for something wider than your fabric, you can also piece together your yardage to make wider pieces. Depending on your pattern, the join can be darn near invisible. Just do it carefully!

I just finished a garment to be published in an upcoming issue of Handwoven. The pattern piece called for 36" wide fabric, and mine was more like 21". I very carefully matched the stripes together and behold, you really can't tell there are two lengths of fabric sewn together. And it looks wonderful!

Tien

Cheryl'B

is 10".  Two back side pieces are the 10" pieces, 2 side pieces and one front piece.  I will be doing B. 

Looks fairly simple.  Hopefully it will be.

Tien I have been looking at some of the things you've done and they are absolutely gorgeous.  The wedding gown is a phenomenal piece of work.  Thank you for your advice.

Badfaerie (not verified)

I just want to reinforce the person above that suggested making a mock up before you cut your handwoven. That is a very fitted piece and you can work the kinks and tailoring out on muslin, then use that muslis as your pattern to cut the handwoven.

Another thing you might consider if you are worried about unravelling on the hand woven is to mark your pattern pieces on the handwoven cloth first, with chalk or a marking pen, and then baste around each piece individually just within the seam allowance. If you use a fairly long  straight stitch or hand baste it is less intrusive and cumbersome than serging the edges of each piece, but still helps stabilize it while you are piecing everything together.

Cheryl'B

This is going to be a huge challenge for me, but I will not let it beat me. :) Was going to do a simple twill - however it is diagonal and with a center panel that just won't do. Now to design the tie -up/treadling for the center panel. I think if I flip my pattern for each piece that should take care of the side and back panels. This is too much fun. The design is as much fun as the weaving.

Faerie -----thank you. I will heed your advice.

WomenWeave (not verified)

Hey, 

This recommendation will definitely help you in making your skirt look more fabulous and will feel more comfortable too. :)

Thanks

WomenWeave

weaving2

do you think it should be lined ?  this way it will hold it's shape  being it's a straight skirt        other wise what happens to the fabric when you sit down?   

weaver1126

Yes it should be lined.  Otherwise it will become what my grandmother called "rumpsprung."

Ancient Weaver

A skirt is by far the easiest garment to make your own pattern for, and a great item to start with, but seeing as this is an old thread, bumped by what looks like a spam post (from WomenWeave) I'm about three years too late with the suggestion! :O

Submitted by Cheryl'B on