When I refurbished my old counterbalance, I replaced all the old cords with Texsolv, and I've been very happy.  I need to replace all the cords on the new old covertible (table to floor) loom I bought, but it has some odd features that make me wonder if something else is a better choice than Texsolv.  

Here are knots on the top of the loom.

knots on top of loom

And here's where the lamms clip on the side of the loom when using it as a floor loom.

So what do you think?  Will Texsolv do the trick?  If not, what do you recommend for the replacement cord?

Comments

mrdubyah (not verified)

I think texsolv would be overkill for this.  You don't need the lattice structure.  Why not take a sample of the old line to your local hardware store and replace the cords with the same stuff?  This looks like standard cotton or hemp cord which is readily available and MUCH cheaper than texsolv. 

Sara von Tresckow

"Same stuff" may be difficult. This is linen loom cord, something very difficult to find any more. It is/was heavily sized and pre-stretched which the inexpensive cord at the hardware store it not.

Texsolv cord van easily be linked by making loope where the knots occur - if needed, and never wears our or stretches after installation.

Peg.Cherre (not verified)

Thanks for your ID of the cord as old linen, Sara.  I've used cord from hardware stores for a variety of things, and it's worth what I've paid for it -- not very much.

I think I'll go with the Texsolv.

ReedGuy

That's what is good about polyester. Same characteristics looked for in sail cloth. UV resistant, stronger than nylon, resists friction heat and low stretch.

Peg.Cherre (not verified)

Are you suggesting polyester cord from the hardware store instead of Texsolv?

mrdubyah (not verified)

Suit yourself, but I think polyester or texsolv would look inappropriate on this loom.  I would probably use sash cord from my local hardware store (NOT Blowes or home cheapo, but a real hardware store).  It is available in different diameters, is very strong, has a cotton shell so it looks a lot like the cord already on the loom, has a prestretched nylon core so it won't stretch, and is available for about 10% of the cost of texsolv.  BTW, the color scheme on the remnants of the label looks a lot like the one on the structo artcraft label. 

Peg.Cherre (not verified)

Thanks for the detailed suggestion, mrdubyah.  I will check it out.  I have a GREAT local hardware store near me.  

I thought Structo Artcrafts were all metal looms, no?  CORRECTION - Obviously all Artcrafts weren't all metal.  But from the info I can find, all the levers are on the top of the castle.  My levers are on the side, right near the cloth beam.  Here's a shot of them.

ReedGuy

Peg no, not suggesting that. Just saying Texsolv is polyester. If hardware stores are like here, all you will find is nylon and jute.

mrdubyah (not verified)

Structo did make a convertible loom but, as you've noted, the levers were on the top.  Yours looks a bit too elegant to be an Artcraft. It has fancy curves and a nice finish that I wouldn't consider typical of structo. 

Peg.Cherre (not verified)

I tried the sash cord but it didn't work.  First, it was a bit too large to get through the holes in loom and required lots of futsing to get through.  The real problem, though, was that no matter how I tied the knots they slipped.  I ended up using Texsolv for most cords.  Yeah, the look is certainly far from original, but I'm all about function over form for this loom.

ReedGuy

Yes, Texsolv removes a lot of frustration and fiddling around, and possibly foul language. :)

sequel (not verified)

The cordage you're looking for may be #2 Sampson or similar.  It's a lighter weight braided rope/cord similar to sash cord but solid cotton, not cotton over nylon.  It's what the early Kessenich looms used.  Where to find it?  Can't help you there...

sandra.eberhar…

I think you need to decide if appearance is important.  If so, you may have to look to find what works.  If not, I have used braided polyester cord for a lot of low-stretch applications.  It's quite stiff, you can thread it through holes in lamms, takes a knot well, and is more abrasion resistant and much cheaper than texsolv.  I got it in several sizes and colors (I like the dark green) from The Rope Guy on ebay.  It is a little shiny (less with the dark green), but an excellent cord.

Submitted by Anonymous (not verified) on