I have a customer who is looking for scarves woven with alpaca that can be embroidered with their business logo.  She wants Made int he USA scarves.  I'm a hand weaver, and not set up for production weaving.  She needs a dozen scarves in fawn or cream alpaca to start.  Anyone on this forum who is already weaving alpaca scarves?

I have both cream and fawn yarn -- 2-ply fingering in skeins rather than cones -- it is Certified Sorted (R) from the Natural Fiber Producers co-op, so very high quality -- not the usual hairy alpaca yarn.

Pam

 

Comments

ReedGuy

What does 200 yards of 2-ply run in price in your kneck of the woods?

TheLoomer (not verified)

First off, Hello!

 There are a few things you need to think of before undertaking this project and the number one concern I have is the embroidered part. Is it going to be done hand of by machine? If it is by hand then you are fine, but if it is by machine then I worry that the needle may get caught in the fiber and pull it out. I have seen this happen and it is not nice.

Now you need to find out how much one scarf is going to weigh and how long it is going to take you to weave, so that you can find out the material and labor cost. So doing one scarf as a sample isn't a bad idea, because once you find out what you need, warping your loom for the most scarves possible is your best option. So go to the weavolution calculator. http://weavolution.com/weaving-calculator

happy weaving

sally orgren

First, I would weave a swatch sample or two, (8" X 8") and submit that to the firm who does the embroidery. They can test their machines and her logo on the final product and determine if this is a compatible combination before more time and money is spent.

----- Further Considerations -------

I am currently doing loom calculations to weave alpaca blankets. From past experience, I know alpaca doesn't have much shrinkage and doesn't full like wool does when off the loom. It was also surprisingly slippery, the weft wants to slink back toward the castle in the shed if not immediately locked in, so care needs to be taken when weaving with it. Instead of "beating", you may want to consider "placing" the weft for better drape in a scarf. This also takes more time and attention.

2 ply fingering = a knitting term. For weaving, you need to know yards per pound. I am working with Henry's Attic Prima Cotton, sold in 8 oz skeins. The YYP for this fiber is 1,300, so a skein = 650 yards. The recommended sett for this fiber is 15-18. Knowing this kind of data can help me plan how much yarn I will be using for one project (don't forget to add project take-up and loom waste!) so I can estimate my materials for multiple projects.

Another item to factor in is the pattern. A solid warp, single shuttle, and plain weave structure won't take as long to execute as a striped warp, two shuttle weave, with a more complicated treadling pattern. A structure with floats (twill for instance) will require a tighter sett (i.e. more material) than plain weave. Floats may be harder for the embroidery company's machines to deal with (lead to more snagging).

If you make a sample scarf, time yourself. I find by the 3rd project in a series, I am weaving at a pretty consistent and fast rate. (I am doing a series of Huck baby blankets right now, and can weave 1 blanket in about an hour with color changes every 4".) So your final time per project won't be nearly as long as it took you to execute the first one, but that initial measurement will give you a baseline.

Don't forget, weaving isn't just materials cost and throwing the shuttle! You have the planning, warping, dressing the loom, and your time winding shuttles to factor in on the price of those scarves too, not to mention the finishing (twisting fringe, sewing hems, etc.). 

Good luck with this! This may be more information than you requested, but I posted in case others follow this thread in the future and might not have thought about all the ramifications of accepting a commission. Weaving for commercial purposes is a bit different approach than what a lot of us practice as handweavers!

Bonnie Inouye (not verified)

I have woven afghans (blankets 4 feet by 6 feet) for sale using Henry's Attic Prime Alpaca. It comes in several natural colors and a few sizes, or it did when I was ordering it. Very nice yarn! I also used it for several series of scarves and it was soft and lovely. I never had to place the weft. This fiber tends to drape well and is very warm. I bought all my warp yarn on cones for faster warping. Henry's Attic is a great place for good prices on large orders.

If you are looking for a production weaver for alpaca scarves, use the Internet and search.

I agree on the embroidery issue. If this person is going to use a machine to embroider the logo, that's another issue. They need a flat surface, usually from a fine yarn with many threads per inch. Some other fiber would probably work better than alpaca.

Bonnie

ReedGuy

Alpaca is very expensive locally, and the wool is local. $15.50 for 2 ply, 200 yards. It's not much more than this for a full pound of sheep wool on 4 - 280 yard skeins. This was why I was asking. The color I looked at was natural brown in a store. It felt like less than 4 oz in the skein. This would make an alpaca blanket very expensive where I live and hard to sell. This part of Canada is very rural and not a lot of wealth unless your Jim Irving. ;)

This has nothing to do with the thread, but was just wondering on prices. As far as selling your work, that is another thread discussion. My comments there are just me rambling. ;)

sally orgren

A bit off topic from the original question

Bonnie—what sett did you use for the Henry's Attic product? I am thinking a structure with no more than 3 warp or weft floats, and am torn between 16 and 18. I usually prefer tighter setts, but am leaning toward 16 in this case from my ruler wrap & preliminary calculations. I will not have enough spare material to make a generous sample-I will have to commit. 

ReedGuy— this particular alpaca product is currently on sale at Yarn Barn for $25 per 8 oz skein. What I am using was in my stash, given to me as a gift, and is probably more than 10 years old now. I am making this blanket for personal use. This yarn was the "Holy Grail" of my stash for a long time. I was reluctant to use expensive materials on such a big project until I developed my skills as a weaver. Now I am really looking forward to executing this project!  

Bonnie Inouye (not verified)

I had their prime alpaca, 2-ply, not the heavier weight. I used 16 epi for afghans in a balanced weave, network drafted twill. I brushed them after washing, as part of the finishing process, and they became beautifully soft and fluffy but you could still see the design in the cloth quite well. Sometimes I used plain weave in certain areas and twill otherwise, with the plain weave distributed evenly to avoid puckering. The plain weave parts did not brush up as much so they made a textural accent.

I wove scarves with Henry's Attic alpaca as warp and usually sett those at 20 epi. Those were more warp-emphasis generally (for better drape) and some had finer yarn as weft, while others used methods for texture.

The afghans have held up very well over time. When I sold afghans at high-end shows and through galleries, this was my top-of-the-line item. They feel different from wool or mohair, more buttery somehow.

Bonnie

sally orgren

Thanks, Bonnie.

I also have the 2 ply. I did a small simple needle weaving in plain weave + a 2 float twill, and that confirmed my leanings toward 16 epi. I got a general sense of the thickness and texture of the finished blanket from my needle weaving, also.

Then, I had a brainstorm! I could take some short lengths of alpaca, tie them onto the loom waste of the current cotton blankets I am weaving, rethread and resley, and actually weave a small sample on the floor loom without using an excessive amount of alpaca or incurring loom waste. With 16 epi, I know now I will have a little to spare for experimentation.

Your confirmation is giving me the boost I needed. I hope to be warping and weaving on this project before the end of the weekend!

One of the last details I am trying to determine is the use of a finer thread to make the blanket self-binding. I would weave the first few inches in something thinner that could be folded over and hemmed. Alpaca doesn't have much shrinkage, so I need something that will feel similar (but not wool, because of the differential shrink rate). I don't think I have any thinner alpaca in the same colors to match. What about Zephyr, does the silk keep the merino from shrinking much? I also have some 2/30 "cashwool" that is very thin and in the right color. Suggestions?

(P.S. Thanks in advance to pdhmaine for letting me ask a few more questions on her thread about this particular project.)

kerstinfroberg

but... the very few (two? three?) times I have sampled alpaca, the wet finishing results indicated it shrinking A LOT more than any wool I have used...

Just saying: *do* a sample!

sally orgren

I am buoyed by the thought I can execute a big enough sample to acquire this kind of information. And I hope to weave a few inches of the thinner binding material too, as part of the sample, so I can figure out this part with confidence, too. Right now I am estimating 10% for take up and shrinkage. (Bonnie, would you happen to recall what your values were?)

Shrinkage/Wet finishing-

The alpaca I wove with previously was thinner and different than this material. (I have woven with yak, angora, and cashmere, also thinner than the material for this blanket.) Those all had take-up, but not a lot of shrinkage. I should note I did not wet finish them the same as I normally do with my cotton, bamboo, and tencel projects. I usually throw everything in the washing machine, delicate setting, with clear dishwashing detergent, and then pop them into the dryer—time and setting depending on the fiber.

In the case of the speciality animal fiber projects, I treated them like handspun. A sink full of warm water, shampoo, lots of swishy-ness, no wringing, rinse, then roll up in a towel to pull some of the moisture out and lay flat to air dry. Guess for a blanket I'll need to use the tub? (I hadn't thought this part through quite yet!)

Thinking ahead, if there is anything I should know differently about wet finishing, please let me know. (Much appreciated!) 

P.S. With this conversation, I think we are leaving lots of bread crumbs for anyone heading down the alpaca path in the future ;-)

sally orgren

Bonnie, I double checked tonight, I have 3ply. Working on cutting off the previous project and setting up the sample.
Submitted by pdhmaine on