HI,

Just wondering if you could have either the glimakra victoria 4 shaft or and Ashford folding 4 shaft with or without treadles which would you choose and why.

If secondhand what would you look out for on these two looms and is there an advantage to the hanging beater which the Ashford has?

Thanks in advance for any help,

Patchwork

Comments

Dawn McCarthy

I have had both and still have the Ashford.  I liked the "heft" of the Glimakra and the metal ratchets but the loom was quite wide and heavy and did not fold.  The Ashford is easy to fold, lightweight and I like the overhead beater.

If you had the Glimakra on the stand and it was not a workshop/traveling loom I liked the sturdiness.

The Ashford folds and is light but the plastic ratchet is a little bit of a turnoff if doing bound samples or items requiring greater tension.

patchwork

Hi

Thanks for that.

It seems like the reed on the victoria is a 3/4" smaller in depth than that on the ashford. This must make the shed a lot less which may be tricky with slubbier warps ?

Are there advantages with having an overhead / swinging beater versus a pivot beater.

I have seen a 20yr old Ashford which is not folding and has the arms sticking out both sides - this looks abit tiring and involves using both arms to change shafts - I guess the new one with the levers in front is better,

Patchwork

Sara von Tresckow

The reed on the Victoria in no way means a small shed.

I've also used both looms and Dawn is pretty much spot on - the Victoria is sturdy and, if on a floor stand a great loom - weaves great fabric.

The Ashford is lighter, folds and has a hanging beater - and also makes good fabric.

patchwork

Thanks, it is so cofusing -

so the 4.5" reed doesn't make the gap the shuttle goes through smaller in height (is that the shed?).

I spoke to a loom dealer and he said avoid the victoria due to this reed height causing a problem for use with chunkier wefts / shuttles and it being harder to get replacement reeds due to the different size system in the UK (which I didn't understand - I suppose it's the difference between countries using cm's or inches)

I don't really need a portable loom and saw a victoria secondhand and thought it looked like a good front levered table loom which may be more affordable than a new one.

All other old models have side levers.

Patchwork

Sara von Tresckow

Your loom dealer is off the wall incorrect.

Unless you choose to use a shuttle that is poorly designed and far too tall for most looms, you seldom need a reed taller than 4.5". Reeds in this size are readily available - they are made in Europe, mainly Sweden, and really, 6" tall reeds are rather unnecessary but bigger is better seems to win over logic.

I just had a lady in for a warping lesson and I used the shop Victoria - it worked really well, great shed, and she loved how it worked.

Submitted by patchwork on