Hello.  I just bought a used Macomber Loom, and I'm going to buy all the parts its missing.  Someone suggested to me that I should get a secondary warping beam that has 1 yard sectionals.  I do double weave in oder to make my cloth wider, and they said that a second beam would make this process easier.  Is this true?  Also, what's to point of the sectional beam? I was never taught to use them, so I don't know what they're for.  Do I really need this?

Comments

Bonnie Inouye (not verified)

There is no need for a second beam with double width or for most other uses of double weave.

The use of a second beam has been discussed on all the weaving lists and probably here- try searching. To summarize, it is needed when you are using two layers of warp and need to have different tension or different take-up.  For example, true seersucker is made with stripes of high-tension yarn and stripes of yarn under much less tension. Another example would be when two layers of cloth are woven and one layer is advanced to form pleats. Pique is another case needing two beams.

A sectional beam with either 1 inch or 2 inch sections would allow you to use sectional warping for efficiency but you would need other equipment as well.

Bonnie

ReedGuy

Heather there is explanatory material (PDF files) on the Arizona University site concerning double weave. You only need one warp beem.

 

Here is one to look at.

http://www.cs.arizona.edu/patterns/weaving/webdocs/opr_8s.pdf

I have a 60" loom, but I plan on weaving queen sized blankets in wool. Hudson Bay Co has full queen in their store for $375. They have been weaving the point blanket since the 1780's in England when the fly shuttle came out. At one time, it was the equivalent to cash in the fur trade, if you were a native Indian.

tomrsey (not verified)

arizona.edu site is interesting.  Thanks for posting it.

 

Heather26

Thanks for all the help!  You saved me some money too!

 

ReedGuy

Might find some tid bits from this blogger's site.

Wanderingweaver's blog

 

Member Kerstin has a blog on the subject as well.

Submitted by Heather26 on