Hello everyone,

I'm a new weaver (but have been machine knitting for a few years), and trying to tackle organizing and storing my yarns. Some are on cones, and some are in skeins and balls. I know protection from the sun is top priority, followed by damp and insects, so they will be in tubs and baskets for the most part.

The thing is, I am inspired by displayed yarns, so don't want to pack everything away. I am looking for nice shelving to hold the containers and display any cones that I leave out to get me going.

I've been poring over back issues of Handwoven, and am especially taken with issue 147, Nov/Dec 2009, that had many examples and ideas on studio set up and yarn storage. I have several questions that I hope can be answered by anyone (even if you don't have that issue in hand).

I'm leaning heavily toward the Ivar system shelves from IKEA, they look modular (a plus for an apartment) and can be ordered over the internet (no IKEAs by me, sad face). Anyone have any other suggestions or ideas for shelves?

On page 22 of the issue I mentioned above, there is a picture of a dowel and chain structure hanging from the wall that is holding spools of yarn. It looks like it holds 10 spools across and 18 rows of spools to form a block of color. I scanned the image and have linked it below. Any instructions or ideas on how to construct something similar?

Looking forward to your ideas!

Thanks, Sandra B.

Spools on dowels

P.S. I posted these questions on the Handwoven website as well.

Comments

sally orgren

I have a shelf that runs about 12-15" below the ceiling, on two walls of the Weavatorium. The brackets for the shelves came from IKEA, a few bucks apiece. These shelves hold my commonly used yarns, and I can stack two cones on top of each other if needed. So it holds a LOT.

I just came up with a rod and chain system to hang my bolts of finished handwovens earlier this year.

The disadvantage for cones of yarn with the rod and chaine system is that it might be hard to access the cones in the middle of the bar, especially if you need to remove them from the bar. The rez on your photo is low, but it appears much of the yarn is on spools, not cones. If you are to pull directly from a spool in this manner, it might feed off better than from a cone in the same position. (And I don't want to waste time rewinding my stash onto spools just to look nice on the wall! ;- )

I agree, out of sight, out of mind. I need to SEE my color palette!

woven2000 (not verified)

I've done a lot of work on this for my studio and far-too-extensive yarn collection.  I also have far too many crafts (weaving, spinning, bobbin lace, needlework, sewing, jewelrymaking, knitting, etc. that I'm trying to stuff into the room).  What I finally ended up with was a lot of Ikea furniture - cheap and highly functional.

For yarn display, particularly for skeins, I got a cabinet with glass doors, which keeps the dust out and lets me quickly see the yarns.  The exact one that I got isn't made any more, but there are plenty to choose from.  Most of my cones are on a cone tree (mine isn't made any more, you might try Google) or in non-Ikea cabinets with solid doors - these are in other rooms, since I have far too much yarn and not nearly enough time.

The miscellaneous non-yarn items (knitting stuff, project bags, completed fabrics, etc.) are in Expedit shelving units with Skubb boxes, and I added the desk for a sewing surface.  I have a very old Ikea desk (no drawers) with small drawer units tucked under for sewing supplies. I'm using Billy bookcases with translucent doors (keeps the need to dust down) for books and other sundry.  The Alex shallow drawer units are superb for items like shuttles.  Sorry if I sound like an Ikea ad, it's just the cheapest way for me to get my life organized, and we have a store only ten miles from home.

Since I have vaulted ceilings, I put decorative items, plants, small equipment and looms on top of the cabinets. 

Short of custom cabinetry, this setup is excellent.  I can find what I need when I need it (essential to my sanity), and it provides a creative space that works well.

SandraJB

Thank you for your suggestions!

I need to do something with my stuff, it's beginning to look like an episode from that hoaders show. I live in an apartment and don't want to do anything TOO permanent to the walls.

I have some yarn trees I bought from a knitting store that changed hands, and plan on using them for displaying some of the yarns, but want to protect the rest. I'm tired of the plastic bins on the floor.

The names of the IKEA pieces are very helpful, the closest store to me is around 5 hours away. These recommendations are great, I've read that some of their lines are for display only and not up to heavy lifting.

woven2000 (not verified)

The one thing I have been told is that you should never move Ikea furniture fully loaded.  They can carry the weight while they're standing, but the torque of movment can really damage connections. If you're moving to a new home, you might decide to disassemble it, but I'm not sure I would.  

Have fun organizing your space! 

tommye scanlin

I have a separate studio and we installed the plastic coated wire shelving as is sold for closets throughout three rooms, floor to ceiling and across entire walls.  I store yarn in plastic lidded boxes on the shelves as well as some yarns that are in cones out in the open.  It has worked out just fine for me.  By the way, I think the Handwoven chain/dowel system is one that Joan Griffin did at her studio for her tapestry yarns.  I've used that system before for spools and it works fine for the way we use the yarn off the cones and/or spools for winding tapestry bobbins.

sally orgren

Tommye reminded me.

I have one of those multi-pants hangers I use in the studio. The kind that have rods that lift out of a groove to hold 5 or 6 pairs of folded pants. I store it on the back of the Weaveatorium door, and use that for my spools when warping with a paddle, or as a spool rack for sectional beaming. It's cheap, portable, and holds at least 3 spools across each rod. (Another kind of warp valet? ;-) Never thought to use if for displaying yarns!

Note, it does not have the width between rods to accommodate large cones of yarn. 

Submitted by SandraJB on