I'm trying to weave with straight selvedges in 2-shaft tabby (Anne Madsen scarf from previous posts). I'm using 8/2 tencel at 24epi for the plain weave, an end-feed shuttle and a temple, end dents threaded at double. Try as I might, I cannot get straight selvedges. I never have this problem when weaving twill. Should I be using a weighted, floating selvedge on each side?

Comments

debmcclintock

You will find some strong feelings about floating selveges and many routes to take to create them. I'm in the "yes" use them camp. I'd wind 2 threads onto a small shuttle, secure them with a robber band and hang small fishing weights off them with paper clips and see how your selvedge looks. The weight balance is the critical factor to catch & hold your weft evenly. I'm sure you'll get other suggests or search around for another conversation thread. It's been discussed before.

Joanne Hall

You might try a tighter tension on your warp.

Joanne

laurafry

How 'not straight'?  Is the fell curving upwards?  Or are the sides not straight?  Loops at the selvedge?  If the fell is curving, I'd suggest *not* doubling the ends in the reed.  If the sides are not straight, try increasing tension, then if that doesn't work, try the floating selvedge.  If you are getting loops, probably not enough tension on the weft in your end delivery shuttle.  Tencel is very slippery.  :)  OTOH, if you are getting loops *and* areas that are drawn in too far, probably an issue with winding the pirn - the weft probably isn't feeding off evenly but hanging up on itself - along with too little tension on the warp.  

cheers,

Laura

Submitted by Andy_SA on