Hi Everyone! I am in a study group where we have been studying developing a block pattern then translating the block into an overshot draft. I drafted a double pine cone pattern from my blocks. But I am having trouble calculating how to make a 6" square from my draft. My notes follow.    I, too, have been weaving samples.  Rectangle describes my sample.  Not right!  And the size, (are you sitting down), is 8-1/2" x 14", finished.  Not anywhere near what I had planned.  This was 11/2 cotton sett at 25 epi, 212 ends of pattern.  Out of four samples I've done, I like the coverage of 8/2 Jaggerspun Main Line.  But, this may change.    Could I please have some suggestions about:     *  Sett for 20/2. (think i need to move to a smaller warp size, right?)     *  Maximum number of ends for 20/2 so I can adjust my pattern. *. What treading do I use? Currently I made my treading tromp as writ and treadled singly with no tie up for my 4 shafts.     *  Comments from those of you who have used 10/2 and wove a 6" square (sett; epi and # of pattern ends); and      *  Any other helpful suggestions. Getting this to a 6" size is important to me.  I want to learn how to make an overshot coverlet a specified size in the future.  Many thanks, I would appreciate your expertise in advising me. Thanks in advance. **********************  

Comments

sarahnopp (not verified)

Have you tried reverse designing it? I mean, draw out the shape to 1:1 scale and then graph from that, at least for practice work? 

I assume from your desciption that you are using the Jaggerspun for the pattern weft, but you are using the cotton for the foundation weft, correct? And I guess I would ask the basic questions like, how hard is your beat? And can you not just reduce the number of pattern  weft picks to get to square, for example, if you are trying to lay in 8 of the pattern weft, reduce it to 6. And have you wet finished your samples?

Sorry for so many questions :) I just spent Spring quarter of school exploring Overshot technique, so I have a vivid memory of all the mistakes I made.

Bonnie Inouye (not verified)

Overshot is a plain weave cloth with decorative weft floats. I assume "Swedish overshot" is the same structure but please tell us if this is something different.

To get plain weave to square, start with a sett recommended for plain weave with your chosen warp yarn. If you want to use 20/2 cotton for the ground cloth, then look up a sett for this for plain weave.

If you want a square from a tradiotional draft, your weft should be soft and a little thicker than your warp, not a lot thicker. But you do not have to stick with traditional results or traditional drafts. The wool yarn you like is much thicker, so you will need to adjust your treadling if you want a square design, and there are other factors to consider. You could beat more firmly. You could use a temple to prevent excess draw-in which keeps you from beating firmly. You could use a finer tabby weft, as there is no rule that says your tabby should be the same yarn as your warp.

If you are weaving overshot, I hope you know to use the blocks for your weft "as drawn in" and not a literal "as drawn in". Blocks let you repeat a pattern treadle and this will help pack the pattern yarns together.

Since you know how many ends per inch are used, you can keep track of  your progress on the first two inches and see if it might be too long or too short. With 24 epi, you look for 24 pattern picks plus 24 tabby picks per inch in the weft- this is why it is often elongated. Count how many pattern picks are in your first two inches and see if you have enough.

Bonnie

kerstinfroberg

Since you dubbed it "Swedish" overshot, pls let a Swede have an opinion... here, nobody really worries about ppi (in relation to epi). Our books recommend a "normal sett" (for plain weave, I assume), and then "sampling how many picks you need to make blocks square". Some books say it is important to use an even number of pattern picks; others just say that using odd numbers od pattern picks will give a different look.

Thus: I would just try with fewer picks/block... :-)

Bonnie Inouye (not verified)

How very sensible, Kerstin!

I find that people who love mirror symmetry tend to pay attention to the number of pattern picks in a block, especially the block at the center of a design. I tell students to watch the results so they understand what makes the pattern picks meet or separate.

Bonnie

desertweaver (not verified)

Thanks for all your replies!

Kerstin, you took my bait!  I was hoping I would hear from a real Swedish weaver for "authentic" tips.  Sometimes we Americans just make things too complicated.  Here's what I have done so far.  I was intrigued by SarahNopp's suggestion of 1:1 ratio.  I pondered that for a day or so to see if I could visually reduce the draft by allocating 6" to 1/4" graph paper.  I think this is the most logical way to address this problem I'm having.  So, this is in progress...

Then, Bonnie, I didn't write it in my note but I tried pattern wefts in this order:  (1)  two strands of 10/2 cotton along with 11/2 cotton tabby.  This is the one that made the entire project too large and long.  (2)  1 Strand 10/2 pattern weft and 1 strand 20/2 tabby.  This result was not enough coverage for the pattern tabby.  (3)  1 Strand 10/2 pattern weft and 1 strand 50/3 sewing machine cotton for tabby.  This resulted in better coverage for the pattern weft.  I liked the hand of this fabric.   And lastly (4) 1 strand 8/2 Jaggerspun for the pattern weft and 1 strand 50/3 sewing machine cotton for tabbly.  This makes a nice-looking sample.  

So, I have a problem that in one section of my pattern the floats are too long to be practical.  While I reduce this pattern to get to 6" I think this will fix my too long floats at the same time.  At least that is what I am hoping (fingers crossed).

So it is to the grid paper, then modifying my computer draft then resampling.  I will let everyone know how this approach turns out.  

Thanks to everyone for taking the time to share thoughts.  I greatly appreciate your time and input.

Submitted by Anonymous (not verified) on