Hi,

I am finally looking at buying a table loom and have looked at the folding Louets and Ashfords at shows.

I have a large floor loom and rigid heddles but want something inbetween,

I have some questions which you will probably have heard many times so please bear with me :

I seem to like to do wollen tweedy type stuff and linen - I am not so into complex patterns - but who knows.

I am probably looking at an Ashford due to the Louets being more expensive although I did think they felt better made and prefered the metal bits to the rather cheapo seeming plastic bits on the Ashford - have no idea if there is any difference tho.

1. Everyone is saying don't get a 4 shaft as soon you will probably want an 8 shaft and the add on kit is very expensive whereas it's only a few extra £'s to get the 8shaft in the beginning. So I guess I just want to check if you agree. At the moment I can't imagine doing 8 shaft patterns.

Can I remove the extra 4 shafts and use it a 4 shaft with out all the extra stuff in the way or is it easy to shove the extra stuff out of the way.

2. Everyone is saying get the 32" as then you have a good width choice and can still use it for narrow stuff. I don't really have a space issue so the size wouldn't matter and I probably won't be carring it around too much - so do you agree I might as well get as wide as possible. I am concerned that the flat shuttle would be quite long on the 32". I think the 24" seems small tho.

3. When I saw the Ashford I thought that the shed space didn't seem very big and also the weaving space available before having to wind on looked very limited.Is this normal or is the especially true of the Ashford?

4. Is there a difference in how much finished cloth can be wound onto the beam between the Louet Kombo and the ashford. If one is doing meaty stuff this available space looked a bit limited.

5. the ashford looked like it has chunkier levers and the louet more like dowels - am I likely to want to move many levers with one hand at one time?

6. some older Ashfords had the levers sticking out of the side. I imagine that on a wide loom this may be quite awkward and that the front levers may be much easier - even preventing me having to stand up. would you generally avoid the side levers if the cost difference wasn't too much.

Any other thoughts?

Thanks SOOOO much in advance

Aspen

Comments

patchwork

 Is a table loom the best option if I also want speed?

Budget is also an issue

Thanks

celtinbirks

Hi

I can't answer all of your questions, but here are some:

Table looms are slower to weave on than floor looms because you have to do all the motions with your hands.

Levers in the front are usually easier to use.

Most table looms have a smaller shed and need to be advanced more often than floor looms because they are shallower than floor looms.

The main reason that people have table looms is for portability or because they don't have enough space.  If one would want a loom as wide as 32 in., a floor loom is a much better choice for that size. 

Hope this helps,

Good luck,

Candace

 

B P (not verified)

Hi

Perhaps you could visit your local WSD Guild and talk to some weavers who have table looms, and maybe try weaving on the different makes?

www.wsd.org.uk  web address for finding your local Guild.

Beth

amyfrey (not verified)

My 22" table loom came with a stand to convert it to a small floor loom.  Having the treadles makes it much faster to use than having to reach up and change levers for every shot.  It isn't as portable when it is set up as a floor loom but if you don't have to move it around, that's not an issue. 

patchwork

thanks

I did wonder about putting treadles on a 4shaft ashford and forgetting the 8 shaft option.

but once you start paying that then one starts thinking for all the extra benefits maybe a small folding floor loom would to the job for longer.

The shed thing worries me a bit but I don't know why.

working with wool and boucles which are a bit sticky anyway - sort of feel that small shed could get annoying.

Does anyone know - if you have an 8shaft ashford table loom can you temporarily take out the 4 shafts and then put the treadles on the remaining 4 shafts - is it that flexible?

Patchwork

Bonnie Inouye (not verified)

A floor loom is much, much faster than a table loom. Most weavers who buy a table loom want something portable for workshops or for travel- to use while visiting relatives or in a summer home, or for an apartment with limited space. Or sometimes for sampling. Since you already have a floor loom, it is not clear why you need a table loom as well. Probably you do not need a wide table loom because your floor loom is wide enough for those projects.

The size of the shed is not super important but a small shed needs a low-profile shuttle or a stick shuttle.

If you can go to the Handweavers Studio of London, they have table looms you can compare and you can ask experienced weavers.

If the price is holding you back, look for used looms.

Hope this helps! Bonnie

 

Cobracastle

I have recently purchased an Ashford 32" 8 shaft loom with floor stand and treadles and am extremely pleased with it. You do not need to remove any of the shafts, just ignore the ones you don't want to use and push the heddles to the side. Shafts 1-4 are attached to the treadles and shafts 5-8 are attached to the levers on the front of the loom. You can use both the treadles and levers for 8 shaft weaving or just the treadles for 4 shafts. The design of the overhead beater gives a pretty good shed - and I can weave about 5-6" before needing to wind on. I used an Ashford standard boat shuttle without any problems. The loom and stand can be easily folded - I just unclip the treadles and fold. It took a good 4-5 hours to put the stand and loom together - but was very easily done. The quality is excellent. If you would like to know where to buy this loom at a good price, let me know. No, it's not through me but I have checked out everyone selling them in the UK and found the best price. Delivery is very fast - I ordered on a Monday morning and the loom and stand arrived next day. Hope this helps you.
Submitted by patchwork on