I have been trying to get a loom bench of a comfortable height, and am having the hardest time. I'm starting to wonder if my loom is just short (or I'm too tall for it).

The breast beam is 28" high, and I am 5'7". I just can't seem to sit up high enough for my legs (and back) to feel comfortable when operating the treadles, but any higher and said legs will not fit under the beam.

I've seen recommendations to put the loom up on blocks, but I don't see how that would help because the treadles will still be the same distance from the breast beam.

Any tips would be appreciated! (Besides "buy a new loom", because I can't do that.)

--Katie

Comments

SallyE (not verified)

Are your treddles attached from the front or the back?   What brand of loom do you have?

 

amyfrey (not verified)

I'm also 5'7 and just measured my loom. It is 31" to the top of the breast beam and my bench is 23". The beam being 3" lower would definitely be awkward. Have you tried an adjustable office chair to find a good height?

Joanne Hall

You are correct, you need to lengthen the treadle cords.  But you definitely have a short loom.  Average breast beam heights on floor looms range from 32 to 36 inches from the floor.  So, I would put the loom up on blocks and make longer treadle cords.

Joanne

Dena (not verified)

Can you let us know what kind of loom you have?

Katie Cannon (not verified)

Thanks for the initial comments! I have a Harrisville Designs, 4-harness (and 4-treadle) loom. Someone asked if the treadles are attached from the front or back... the front or back of what? (Sorry, still new to weaving and self-taught.)

laurafry

Are the treadles attached to the front of the loom or the back?  As I recall the treadles on a Harrisville are attached to the front (where the weaver sits).  Rather than lift your leg to move your foot, are you sliding your foot towards the back and depressing the treadle as it moves?  Then heel/toe to change if you are using the same foot.

I'm tall-ish at 5'9" and I do this on looms with the treadles attached at the front.

cheers,

Laura

ps - may even have a video clip on my You Tube channel showing this....

Dena (not verified)

Treadles are likely hinged at the front. Harrisville looms are short. My first weaving job was on a Harrisville and I permanently blew my back out using it (I'm 5'3"). They're really meant as beginning looms and they're good to learn on, but, if you want to do some serious weaving down the line, eventually, you'll want to consider a sturdier and taller loom (sorry if you didn't really want to hear that...). Try using a chair instead of a loom bench, with or without a cushion to adjust for height.

Katie Cannon (not verified)

Ah, now I understand. Yes, the treadles are attached (hinged) to the loom at the front, and tied at the back.

And yes, I have tried adjustable chairs and benches... but the heights that make my legs comfortable also put the weaving surface awfully far away-- practically in my lap, giving me a crick in my neck to look at it. Plus that makes it hard for my knees to fit under the breast beam!

So, what height of blocks do you suggest I put this loom on? Aim for a breast beam height of 32-36" as was mentioned? And is there a danger of it eventually vibrating itself off the blocks, or is there a good way to secure it?

sequel (not verified)

The Harrisville 22" loom is basically a workshop loom, designed to fit with a standard height dining or folding chair.  My taller students have a hard time with it and the Baby Wolf as well.  Do what you can with it, but keep an eye out for a loom with a higher breast beam. 

You really don't need to look at your weaving for every pick.  If you concentrate on your shuttle and beat, you only need to check your work now and then.  Heads up, back straight and weave!

karentiede

Someone's been shopping a Harrisville loom on the local Craig'sListings--several areas around the state, always the same pictures, same price. 

I thought those looms looked a bit uncomfortable in the pictures on their website... now I know.  I'm 6' tall, so they're out of the question for me. 

I have to be careful about how I sit at a Newcomb Studio, but it's not impossible.

Submitted by Anonymous (not verified) on