I expect this question has been asked a hundred times already .. if so please point me to the thread :D 

I have taken ownership of a beautiful toika loom (one previous owner of 30 yrs ... !) Its the one where the lady is one the beach with the loom set up but no tie up !

I've got the main structure up .. by myself, pretty chuffed doing that ... now its the tie up and where to start. I have several diagrams and for whatever reason it seems beyond me. I was hoping that someone might know if catalog no 63 is still in print?  The only thing that is still tied up are the lower lams and treadles .. which still undone. 

any tips or places I can get help with this ... 

thanks in advance 

Sarah 

 

Comments

Bibii12

Being new to the site I wasn't familiar where to find things, however I've located a few threads to Toika CM. 

I've tried the link Joanne Hall suggested http://glimakrausa.com/about-cm-cb-looms.html unfortunately it's coming up error 404 ..  

I've printed off the Madelyn Wan Der Hoogt article ... but have discoverd my heddles are 11" cotton string  - does this make a difference ? 

S

 

Dawn McCarthy

Congrats!  I have the same loom!  I highly recommend Joanne Hall"s book "Tying Up Your Countermarch Loom".

I would untie those lams and start from scratch.  Once the shafts are hung and ready with all the heddles you need to warp and thread the loom.  This will help you make all the adjustments to get the loom working nicely.

Also visit the Toika/Varpa Loom group.

If the loom still has string ties I recommend switching to Texsolv - it is a little expensive but a future time saver!  

Dawn

http://bloominloom.wordpress.com

Yvonne K

Hi Sarah,Today I set up the frame for the Toika drawloom I have just bought - same loom, same age, just twice as long. I needed help to get it together, and we got things mixed up and had to pull it apart again! Tomorrow I will start putting in the shafts and lams. I'm not in a hurry to replace the original cords as the snitch knots allow for infinite adjustment and are less fiddly than putting pegs in and out of texsolve. I am apprehensive, however, and will follow Dawn's advice and put a warp on the loom before I adjust the lams and treadles.

Su Butler

I have owned the same loom, mine is 16S, 20T, for nearly 20 years. GREAT LOOM! I have a bit of info on my website about this particular loom. Go to www.subudesigns.com Click on EDUCATION>Weaving Basics. You can print out the article then go to GALLERY>TOIKA looms to see the photos referenced in the article. What I have found to be critical on this loom is to keep EVERYTHING parallel to the floor...that means shafts, lamms, treadles - all tied so they are parallel to the floor. It is also important to keep the distance between the bottom of the shafts and the upper lamms, the upper lamms and the lower lamms, and the lower lamms and the treadles as close to equal as possible. Do NOT angle the lamms or you will cause all kinds of trouble for yourself. Let me know if I can help you with your set up. These looms are some of the easiet to set up and work like a dream once set up! Congrats on your purchase of an excellent loom! Su :-)

Joanne Hall

Hi Yvonne,

You are going to have a lot of fun.  But do start with a simple warp and a simple project.  With each warp you will learn more about your loom. 

Joanne

Bibii12

Hi Ladies, 

For a start thank you so much for all your help. Very much appreciated ...

@Joanne - I'm working through all Countermarch PDFs. They are really helpful, I think its good for me to understand the all the bits before getting too stuck in and getting fustrated.  

@Dawn ... Tomorrow will start untying the lower lams and treadles ... definately will make the whole thing so much easier to understand. I have heaps of yarn to choose from (came with loom, along with warping mill too ).  What the name of this loom is it Liisa? 

@Yvonne ... wow .. wider goodness me that will be some epic weaving adventure... 

@ Su ... have printed the Toika info .. thanks .. your work looks amazing, cant wait to check it out more. I'm a spinner, and have recently got into natural dying. Probably planning on using alot of my home spun on the loom. 

alot of work to do .. can't wait 

many thanks 

happy weaving

Sarah 

 

 

SallyE (not verified)

This loom is the same as a Varpapuu loom - I can't tell the difference looking at them except for the name tag.   My Varpapuu came with a really good manual.   I sent a copy of it to Janet Meany at the Weavers Friend, so you can get a copy of it by contacting her.  

http://www.weaversfriend.com/page1/page1.html

 

SallyE (not verified)

Actually, the manual I got was for the Toika not the Varpapuu, but they are the same from what I can tell.

 

Bibii12

that's great thanks Sally ... 

I'm getting to grips with it slowly as I've had surgery for carpel tunnel. 

Sorting out string heddles ... can you get heddles in texsolv. 

Also do many weavers use eye hook on the top shaft -I see you do that Su. I need to source some clips for the eye hook, think its a small detail though. 

thanks Sarah

Dawn McCarthy

Sally is right - the Varpa is virtually the same as the Toika Liisa, the lams and upper jacks are a little thicker, the Varpa allows you to release the warp whilst seated.  I have owned both and enjoyed weaving on them.  Don't hesitate to email if I can be of help.

Dawn

 

Sarah D

I'm another Sarah  (from Australia) that has an older Toika, acquired just this Feb - a 12S 150cm. I set mine up from the original Toika booklet that came with it, but with new texsolv heddles and tie up. It went like a dream - weaves like a dream too.

Re the eyes - I actually removed those that came with my loom, preferring to use texolv directly around the top of the heddle bars. I found that the eyes were placed too widely spaced which meant the cords weren't vertical & met the heddle bar at an acute angle - just irked me that they possibly weren't pulling/working so efficiently that way.

Bibii12

Hi Sarah

Nice to meet you too ... in the end I put the texsolve around the heddle bars aswell ... I did set them with the eye hooks, but I didn't like the look of the angle!

On to the treadles now ... 

Hi Dawn .. I pm'd you there, wanted to find out if you might send me a couple of photos. Especially with the treadle ... I think I've done the upper lams right no centre hole in the lower heddle bar, so tied texsolve around bar and threaded through centre hole of the upper lam. Y cords threaded into lower lams. 

Should I put on a warp at this stage before doing up the treadles? 

all the best sarah 

 

 

 

 

kerstinfroberg

Yes, you should put a warp on. The warp helps balance everything, and, measuring or not, you would probably have to adjust the treadles anyway. So why do it twice?

Bibii12

Well its been slow, I finally got the warp on ... pretty pleased as its the first one I've completely on my own ... (I've only ever done two!) 

When I took the pins out it was looking pretty even, although the lams where banging into each other (good shed, from what I can see) ... I started fiddling around trying to balance all and now I've completely made it worse.

Im reading all the info in the toika loom section and going to see if I can get it right, I'm determined at this stage. I've learnt so much doing this process from scratch.

Sarah

 

Dawn McCarthy

Focuss on the shed floor in the beginning, as long as you have a flat shed floor and room to pass the shuttle you should be fine.  My first set up on my countermarch loom I fiddled and fiddled and fiddled to frustration trying to make it just perfect and just like you went from good to worse - in the process I learnt a lot about my loom (and my determination).  The goal is to make the distance between the lower shaft bar, upper lam, lower lam and treadle as equal as possible.  You don't need a huge shed and don't tie your treadles too high!  Have fun!

Dawn

Submitted by Bibii12 on