The last two days I've posted about weaving ergonimics on my blog:

http://laurasloom.blogspot.com

Some things to think about in terms of reducing injury while weaving....

cheers,

Laura

Comments

endorph

definitely thumbs up on holding the shuttle. I find thumbs down vert awkward in terms of control. I use my desk chair at my loom and find that it gives me better control on how I sit at the loom. When I am at classes where we sit on benches I find it much more tiring and painful than when I am weaving at home. Even with the apdded seat on my chair I still find I occasionally need to add a small pillow for a bit more cushioning - especially when threading the heddles. Thanks for the blog posts, I always find your blog interesting and informative. Tina

MaryMartha

While reading Laura's blog post, I kept lifting up my hand to simulate throwing a shuttle.  Then, I'd return my hand to the trackball in the thumbs down position in order to scroll the article.  Very revealing.  Confirms what I'd thought - my loom is not nearly the orthopedic danger zone that my computer is.

r1mein54 (not verified)

Never really thought of how I throw a shuttle but I too like extra cushion on the bench which is elevated so arms don`t tire out and not too high to add to back strain bending over. Also what works for me is to do like the "computer time out" - weave up to 50 minutes and take a 10-15 minute break. If the boss does not like the loss of production, I`ll fire me.

laurafry

Yes, a rest break every 45 or so minutes is a very good idea.  :)

cheers,

Laura

SallyE (not verified)

I've been throwing my shuttle thumbs down.   I just got back from the draw loom class at Vavstuga, where Becky caught me doing that and recommended that I throw thumbs up.   I did that all week and found it very comfortable, but when I got back home and started weaving on my Macomber, it didn't work. 

The shuttle race prevents me from throwing thumbs up - I kept banging my knuckes on the race.   So, I've decided that, for me at least, thumbs up works better on CM looms with light shuttles and no shuttle race, and thumbs down works better on jack looms and with heavier shuttles.

(Great class, btw!  Beck was wonderfully patient with me, and I did some really DUMB things in the course of the week!)

 

laurafry

I throw this way on looms with shuttle races and those without. But you have to do what feels right. Just make sure that you take regular breaks and stretch your muscles. Cheers Laura

celtinbirks

Laura, I give your article two thumbs up !  ;)

Kade1301

I was surprised how comfortable my weaving bench is without any padding. After reading Laura's post a few weeks back about good position at the loom I discovered I didn't have a single seat in the house that would allow it (my office chairs don't go high enough). So I built a weaving bench (that was faster than buying one and, as I had all the materials already, much cheaper). The seat is slightly inclined (primarily for technical reasons: I wanted it to be adjustable cm by cm, but didn't feel comfortable with drilling a 5-mm-hole every cm.) and that works out perfectly for me. I took care to carefully round off the edges of the seat, and I'm sure that round edge and inclination make all the difference (I have an Ashford spinning chair which I find perfectly awful to sit on).

Then I was lucky enough to see Laura's video before ever throwing a shuttle, so the thumbs-down position never occurred to me (ergonomics aside, I like having my thumb there to stop the bobbin spinning).

But as I'm typing this (thumbs down, as they push the space bar) I wonder: Is it really the thumbs down position that's a problem, or is it the sideways movement with the thumb down? Because simulating the shuttle throwing movement here at my keyboard, I notice that the movement is much easier with my palm facing up than down. What do you think?

 

 

Joanne Hall

when I was teaching recently and wove on a jack loom.  The shuttle race was making it hard for me to throw the shuttle.  But it was a small loom.  Can you try lowering the beater on your Macomber so that the shuttle race is a little lower?  Macomber shafts are heavy, so you may not need the shuttle race as much as it is needed on a loom with shafts not so heavy.

Joanne

Joanne Hall

I find that I don't need padding on the bench when I am weaving on a tall loom.  But if the breast beam height is low, less than 33 or 32 inches, I feel more comfortable with padding.  When the breast beam height is a few inches higher, my knees are lower and there is less need for padding on the bench.

Joanne

JDStar (not verified)

I just got a Mighty Wolf and wove on it last week.. As I was getting used to it (table loom and inkle loom to this point) I was thinking I needed a trainer like at the gym to show me proper positioning.

I lowered the bench (everything is 2nd hand) and really worked on finding the right way to sit so I could use my weight on the treadles and not lose my balance.

I've seen diagrams on proper positioning for sitting at the computer. Something like that would be really helpful for using a floor loom too.

~JD

laurafry

There was an article in Handwoven a couple of years ago, but essentially the two main points are:  hips higher than knees, elbows should clear the breast beam without having to hunch your shoulders.  Go to my You Tube channel and watch the video clips showing how to hold and throw the shuttle.  :)  And the others on winding warps etc. for more tips on ergonomic approaches to the different processes in weaving.

cheers,

Laura

kerstinfroberg

is HUND - and, amazingly, it works in English too: High, Upright, Near and... (I don't remember - have tried for ages to find out the D - my old teacher is dead, unfortunately...) The Near may not be as important when using smaller looms - the idea is "no stretching to reach the shed".

SallyE (not verified)

Part of the issue for me is the weight of the shuttle.   On my Macomber I've been using Leclerc boat shuttle, which are quite heavy when compared to the Glimakra shuttles, even the damask shuttle - which I LOVE!  I simply don't like the feel of throwing those things thumb up, it's too jarring for my wrist.  I don't think changing the position of the beater would change that, and I'm using a floating selvage so the current position is perfect for that.

I could switch to using all light shuttles, but can't afford that right now.   The current piece I'm working uses 7 colors, and I have that many heavy shuttles, but only just got a few of the Glimakra ones.   I like to have a shuttle ready with each color, it just makes things easier.  

laurafry

The golden rule of repetitive motions is: when you feel the strain...stop! Cheers Laura

Monica Bellas (not verified)

I never knew that your knees should be higher than your hips. I bought a used loom with a bench that places my body in the reverse position. Now I know why my back hurts after 45 minutes of weaving! Thanks, Laura, for the pointers. Monica

laurafry

Other way round - hips higher than knees.  If your hips are lower than your knees, you run the risk of lower back pain.  Sit up straight on your sitz bones so that you engage the abdominal muscles to assist in the treadling, not the lumbar muscles (muscles of the lower back).  Don't slump, rounding your back and sitting on your tailbone.

I feel like I've been banging on about this for ages and yet I still see people sitting so as to invite back pain and possible injury.  If your loom bench doesn't put you in the proper position, change it - somehow.  Either get a different seat or sit on a foam cushion or something to get your hips higher than your knees...

If people want to encourage new weavers to have good posture/position at the loom, please recommend my You Tube videos.  Let's spread the word and help weavers preserve their bodies for many more years of productive weaving!  :^)  Can we make the videos go viral in the weaving community????  :D

cheers,

Laura

Joanne Hall

is to put the bench up close enough so that you don't have to lean forward to weave, especially for weaving wide warps.  Beginners often forget this, especially if their loom bench is heavy and hard to move forward. 

The old traditional looms often had a fabric protection board on the breast beam.  (These are the full sized floor looms).  It is there so that you can have your stomach touching the breast beam.  The thin board protects the fabric, and sitting that close protects your back. 

Joanne

SallyE (not verified)

I think the other thing that helps, my back at least, is the Macomber heal rest.   Plus that, I use a rocking bench from Harrisville.  I've been building heal rests for my other looms.   It makes a huge difference.

 

endorph

I find that I use much the same body position and posture on the loom as I do on the organ. I sit forward with kness lower than hips and use my abdominal muscles to help support my body. I have been playing decades longer than I have been weaving and I think it was natural for me to adopt the same techniques I use to pedal the organ to treadle the loom. The loom however is much easier on my hands and arms than playing the organ!

Tina

Artistry

This all goes for Tapestry weaving too, except throwing the shuttle. ( although on the floor loom I've always been a thumbs up thrower) I sustained an wrist injury in November from repetitive motion, incorrectly using my hands doing tapestry 10 hrs. A day for a 6 weeks. Didn't feel a thing! Then one morning I couldn't flex my hand. I have had excellent tapestry teachers who have taught me very good technique. They are not to blame! with a looming deadline I took shortcuts. So it has just been since May that I can weave tapestry. I took my small tap. Loom to the PT so she could watch my hands. One piece of advice was to stretch my hands/ wrists/body frequently. I know I've rambled here, but Laura is so right! If we don't take care of our bodies then we can't do what we love. A huge lesson learned here!

Monica Bellas (not verified)

I knew that -- don't know why I wrote it the other way around. Is there an optimal angle for bending the knee to prevent long term damage?

Monica

laurafry

I haven't actually measured.  Some looms are more comfortable with a more standing posture.  One loom I wove at just had a rail to lean one's bottom on - there are some looms that are meant to be woven at while standing.  I'd go for comfort.  :)

cheers,

Laura

ChrisWeaveMaine (not verified)

I'm always interested in what experienced weavers are doing.  I'm a career court reporter (yes, those people with the little machines), so wrist, arm, shoulder, back ergonomics are part of my everyday work life.  Although since I work in a different office every day, I strive for a "shallow" enough chair that I can sit against the back, my thighs slope gently from the hips, with my knees bent at less than 90 degrees.  We keep our machines low so the angle at our elbow is also less than 90 degrees.  (Shoulders back, stomach in.)  Obviously, our hands are palm down, but we don't bend our wrists as our fingers fly.  Orthopedic surgeons (expert witnesses) have told me repeatedly that the most important thing about avoiding hand/arm pain is how we sleep -- don't curl your arms and wrists up towards your body -- and take a break, if not every hour, at least every two.  Hope this is helpful hints from a beginning weaver.

Artistry

Yes Chris , that was a concern of my Orthropedic Surgeon Hand Specialist, how I was sleeping. I'm still wearing a brace at night so I don't further injure my wrist. He echoed everything else you said frequent breaks and the sage advice of my PT of stretching , including hands and wrists, before and after work goes a long way.

ReedGuy

I find my home built loom bench I made, which rocks, is comfortable for me. I usually take breaks from weaving or threading, just because a pirn has to be loaded into the shuttle or something else has to be attended to. When I'm on a roll weaving and other tasks that go along with it, I'm usually at it for over 8 hours. It's just one of those things you enjoy doing, so time doesn't mean a whole lot. In my case I'm not doing it for profit, so that doesn't even enter into it. ;) Too bad time has to be taken out to cook meals. :D :D ;)

laurafry

When you take your breaks make sure you stretch the muscles you've been using and let them rest for at least 15 minutes (do something else that uses different muscles).  :)  

cheers,

Laura

Submitted by laurafry on