I need a different temple, one with really strong, long spikes.  I have used a commercial, good-name-brand hardwood temple for three rugs now, and I like the concept and the results.  However, two teeth on one side have ripped out of their wood sockets (non-repairable) and the teeth themselves are not long enough to penetrate the rug fiber (jeans) I'm using.  Instead, they have repeatedly torn the fiber at the selvage.

(In a perfect world, BTW, temple manufacturers would solve the problem of lost / losable pins.  I finally tied my pin to the temple, but it's not a great solution beause the loop in the pin is open at the bottom and the tie can still come off.)

I may have to make my own, using sharpened nails.  As I am not a woodworker, this will not be easy.

Can anyone recommend a commercially available temple, 24-36", that has teeth from hell that will work with heavy rags?  I saw some carding combs at a fiber show last week that had the teeth I wanted, but the combs were $150 / pair.  If that's what a good product costs, I'm not going to argue, but I'd rather pay that for the actual product I need than for a part to go into something I still have to make.

Comments

Joanne Hall

We have been asked for temples with finer teeth, but not for bigger or thicker teeth.

If the teeth have come out and it is a commercially made temple, they can be replaced or fixed.  Perhaps you need to put less stress on the weaving width.  Maybe if you put a little more slack in the weft, there would be less tension on the teeth. 

Would that be a possible solution for you?

Joanne

 

debmcclintock

Toika metal temples rules, great temple, pricey enough that you will ask that it be part of your burial. Small, strong and adjustable, bonus in that you can see your rug. Works on fine fabric as well as rugs, you just have to learn how to place it.

Kade1301

Have you ever tried one? Mine is a no-name (at least it nowhere says Toika, and it didn't cost a fortune, either), similar to the red one here: http://www.woolery.com/store/pc/Temples-Metal-or-Wood-8-to-60-p6895.htm (but white and I bought it in Germany, I believe for less money) but it seems solid enough (a lot more solid than the wooden one - I have much more the feeling of having got my money's worth). The teeth are not particularly long, but hellishly sharp, and set in metal, not wood. And there's no pin to loose, either!

Dawn McCarthy

I have several metal Toika temples which look like the ones in the link. I have used them on various fabrics with good results.  The temple should hold the fabric to the width that is sleyed in the reed.  If you are fighting too much draw in you may need more slack in your weft as described by Joanne.  I have not had any loose or bent teeth in 7 years of owning the Toika temples.

Dawn

http://bloominloom.wordpress.com

karentiede

The teeth, unfortunately, did not "come out."  They tore out, and ripped the wood with them.  It may have been a weak spot in the wood, but based on my understanding of wood and the forces on the wood where the pins are inserted, it is not repairable.

It's entirely possible I'm weaving too tightly, despite putting as much of an angle on the weft as my shed will allow.  New to this modality. 

Sara von Tresckow

In 30+ years of weaving everything from gauzy curtains to rugs, I've never had teeth pull out of the wood. If dropped, teeth can break off.

The older wooden temples came with screw plates and the teeth were replacable - don't know how today's are set up.

A temple should spread without great pressure - and the 24" to 36" size is usually sized for clothing fabrics, towels and blankets. When weaving finer fabrics, if the weft is put in too tightly, the temple can cause the outer threads to break before the teeth are damaged. My 36"+ temples are larger and have stronger teeth.

Also, I have a nice, large temple that dropped once - it is missing a tooth, but still functions well.

Kade1301

In my (limited to 4 rugs) experience, just putting the weft in at an angle gives not enough extra length for weft-face weaving (that was plain weave, not twill). I put the weft in in waves (how many and how high is a matter of experimentation) and had very little draw-in (maybe 1 cm for 71 cm) - and no problem with selvedge ends or temple (the steel temple mentioned before)...

karentiede

Bought a Toika temple and it's working better for me.

Could be that I'm weaving more knit weft; could be that I'm paying more attention to "slack" across the width of the loom; could be that the narrowness of the shaft, compared to the thickness of my wood temple, intereferes less with the beater. 

Only one rug completed on the new temple so far.

Thanks all.

Submitted by karentiede on