Hello,
I purchased a worn 50-year-old 4-shaft counterbalance loom from my weaving studio. I'm a beginning weaver that has wove on other counterbalance looms at the community weaving studio but now that I am weaving at home on my own, I'm having problems with my loom.
Currently I am weaving a warp of rose path dish towels. This is my first project on this loom. As I started weaving the the third towel today, one of the tex solv cords snapped. (This is the longest main cord that connects the metal dowels holding the shafts to the main top wood dowel. The cord snapped very close to where the shafts connect to the cord. The other end of this same cord is very frayed and about to snap too. On the other side of the loom, the cord doesn't have any sign of wearing. See attached photo.) This is odd because they were just replaced with brand new tex solv cords when I started this warp. My weaving teacher came over to my home and showed me how to replace them, so I am assuming this isn't the problem. Why did they snap so quickly and only on one side?
Weaving through this warp has not been smooth. Alot of times when I'm weaving, the shafts become unbalanced after three to four picks. I have to readjust the shafts to regain the shaft balance (by gently lifting the shafts so the cords redistribute themselves...) Something isn't right. The photo I've included is how the remaining cord is tied to the dowels.
I don't know much about counter balance looms and am frustrated that I can't weave on this long weekend!
Any suggestions or insight would be greatfully appreciated.
Andrea
Comments