Greetings all. First, as a newbie to looms and weaving, I will apologize in advance for asking some very basic questions. I have recently discovered a very old barn loom in my grandmother's shed. While it was not used in her lifetime, she says it was used probably c. 1850. The piece is in very good condition and I want to restore it to its former glory. I can easily restore the existing wood, but I need some guidance/plans/how to on: 1) How to build/buy new heddles (I assume they would be string heddles for this piece) 2) How to put get new reeds in the beater bar--(they are missing...I know I can buy them, but what would be right for this age loom?) 3) How to harness the heddles and hook them to the foot pedals (pedals are missing, but I can build new ones) 4) What type shuttle would have been used (I have not been able to locate it) The loom is made from heart pine, and I am located in the lowcountry of South Carolina. Can anyone provide some recommendations of references I could use to complete the restoration, companies that sell the required parts, etc. Any assistance would be greatly appreciated. I have tried inserting a picture of the loom,but am having difficulty....apologies if the picture displays more than once (or not at all).

Comments

elf35

This is a picture of my loom...finally got it to post.

Joanne Hall

I have information on our website which will give you a good start.  Read the first two files here:

http://glimakrausa.com/about-cm-cb-looms.html

You can tie the heddles yourself from 12/6 seine twine, or you can purchase Texsolv heddles.  Read here:

http://glimakrausa.com/texsolv.html

The same website can give you information about reeds.  In the old days reeds were made of wood or bamboo and were shorter than reeds made today, about 3 inches.  A 4 inch tall reed would be appropriate. 

If you have questions about making the wooden parts, just ask.

Joanne

 

elf35

It will take me a while to look over all of the wonderful reference material you have suggested.  From my quick review, I have not seen anywhere that provides wooden reeds as opposed to stainless.  I have a fragment of the reeds from the original, which were wooden (see below).  Is there anywhere you can suggest?

kerstinfroberg

Question: are you restoring for mostly display, or do you want a working loom to use? I'm sure that "they" would have been happy using both texsolv and metallic reeds, had they been available... Over the years I have got a good number of wooden reeds (mostly from flea markets and the like). On the occasion, I use them - but on the whole, I prefer modern reeds (and texsolv heddles). Modern reeds are more even (that is, if it is said to have x dents/cm, it has, while the wooden ones have *approximately* x dents/cm).  The advantage with texsolv heddles is that they have "open eyes" making them so much easier/faster to thread.

To answer your question: from what I know, here in Sweden,  nobody manufactures wooden reeds since the beginning of the 20th C. It may be different in other parts of the world.

Cat Brysch

Please do post pictures once you are done restoring it, won't you? I hope you plan to weave on it or have someone else weave on it...it's been silent too long! As for the harness and treadle assemblies...I'll bet they are still in the shed as they would not look like anything more than a pile of sticks and wood pieces!

Michael White

If you really want "wood reeds" you could make them out of 1/16" wooden dowels which you can get from a good hardware store or Home Depot, Lowes. You would have to drill a couple of support boards. If you want "real" reeds you could buy reeds from a basket supply store. Again you will have to drill the holes.

Michael 

kerstinfroberg

Here on Weavo, ReedGuy has described how he made his reed (metal, but the procedure is the same) - here.

Here is a link for a description of how "they" made reeds, in Sweden. It is in Swedish, but maybe google translate can be of use (or maybe not).

Wikipedia also has a short desciption - here.

Here are a couple of detail pictures of a broken old reed of mine:

In the second image you can see where the lost dents went.

elf35

Thanks for the additional comments and encouragement. In answer to some of your queries: 1) I want to restore the piece in a historically appropriate manner (I have old matching wood I can use to make any needed heddle parts, etc.); the loom will primarily be for display (i.e., not heavy use), although I hope to work with a weaver to warp the loom and create a small piece of fabric. 2) I will post a picture once I get everything done, though it will be a while. With respect to the comments on wooden reeds, I am not sure I have the wherewithal to create my own, although I have seen some for sale on eBay. However, the ones I have seen are 32" long, and the opening on my beater board is 40 1/2". Could I use this 32" one, or should I get a reed that is as wide as my beater board (whether I use wood or metal)?

Michael White

Unless you are planning to weave the full width you can use a shorter reed.

debmcclintock

Ok, I've traveled alot in SE Asia and you can still find bamboo reeds over there in the right markets. Now, I've seed reeds set up as Thai scarf hangers on our side of the ocean. If you have a Thai gift shop or Asian market anywhere near you check them out for reeds in display units. You can pull the reed out of that and use it in your loom. Here's a link I found for illustration purposes http://www.novica.com/itemdetail/index.cfm?pid=137198 Now, some of these reeds are rough, but can be cleaned up and would be suitable for a display loom.

Laurie Dux (not verified)

I have an old barn loom and use the texsolv heddles. I think they look as original as any newly made string heddles. I made my own at first but when I wove for a wide project decided to buy the texsolv. I've never used a real reed reed, but a friend of mine has and says the beat is very different from the metal reeds. She liked using it. Have fun with your rediscovered loom. I bet she weaves beautifully.

elf35

Thanks to the many of you who have posted helpful comments. I have been making good progress in restoring the loom. I have finished cleaning up about half of the frame, and have an appointment at the Charleston Museum, where they have a similar loom set up and strung, and the chief interpreter (and weaver) is going to let me have a closer look. Two questions for all of you: 1) Any suggestions on a light finish for the wood? I was thinking a very light low gloss tung oil. 2) Any guidance on the kind of knots one would use to tie string heddles? I have plans for the jig to use to tie them, but there is little about the type of knot to use. One book says a simple square knot, but this seems a little light. Any hints?

kerstinfroberg

My string heddles (of which at least a good portion are store-bought) all have square knots. They are not "varnished".

I have never seen "varnished" heddles on a loom in use (or for display) - but many older (Swe) books contain recipes for varnishing heddles. Most just say "use linseed oil", others are more complicated, using both egg white, linseed oil and more (can't find one right now)

Joanne Hall

About 20 years ago I visited a couple in Smedjebacken.  Both were weavers and they both had varnished heddles.  I did not ask about them, but they were stiff and a brown color.  

Would one have to stretch them on a frame before putting the varnish on them.  I would think that would be necessary since they become stiff.

I am sure than many weavers were happy when Texsolv came along.

Joanne

kerstinfroberg

Writing from memory here, but I think most descriptions are approx the same: dip one half (incl eye) into your fave varnish, then hang from dipped end to dry. The other half will get enough varnish from "gravity".

In Högbo (then a part of Nordiska muséet, near Gävle) there was a small rya rug with knots made of varnished heddles. Those are the *only* varnished heddles I have ever seen :-)

elf35

I have no interest in varnishing the heddles.... I was looking for suggestions on

elf35

I have no interest in varnishing the heddles.... I was looking for suggestions on

elf35

I have no interest in varnishing the heddles.... I was looking for suggestions on

elf35

Darned computer. I have no interest in varnishing heddles, I am looking for advice on 1) What type of knots to use and 2) what wood finish (like tung oil) to use on the frame.

elf35

Darned computer is not cooperating. Thansk, but I am not looking for input on varnishing heddles. I am interested in 1) knots to use on my heddles and 2) what finish anyone would recommend on the frame (with is heart pine).

jlread (not verified)

Danish oil would work well and provide protection.  I've used danish oil [clear] on tons of wooden items...including a floor...and have had great results.  You can get this product at Lowes.

Woodburner

I take it that's not a reed (hung on strings) being used as a raddle towards the back of the loom?

elf35

No definitely not a reed. It is a spreader, I do believe.

elf35

Thanks to all of you who provided valuable advice to assist with my loom restoration. My great-great-grandmother Charlotte would be happy. I hope to have someone help me warp it soon! I will post pictures, if I can get this to work.

elf35

Thanks to all of you who provided valuable advice to assist with my loom restoration. My great-great-grandmother Charlotte would be happy. I hope to have someone help me warp it soon! I will post pictures, if I can get this to work.

loomyladi (not verified)

I was curious how your barn loom rehab is coming along? Mine has been sitting in storage for far too long and recently made its way to my studio. This loom is from Braxton Co, (West) Virginia. The family history dates it to as early as 1840 and most likely older. Unfortunately I'm missing a couple of parts. I have a great "loom guy" and he has some spare parts so he's hoping to get me working in the next few weeks. He has a variety of spare barn frame loom parts so if there is something you need he might be able to help. I just finished wiping this down, but I only plan to do light sanding on the breast beam to smooth off the roughness. This loom came with 4 old reeds, but I doubt I will use them. I'm going to start off by tying my own heddles, I want to use this to demo on and would like to have it as accurate as reasonable possible. I plan to warp and then wrap harnesses and reed flush against the warp beam to transport. Of course I won't be able to keep fabric on the front beam, but I can save time for short shows/demos. I would be interested in photographs of any barn looms that you have/use/have come across. I'm intrigued by differences and similarities.

gypsy

Hi everyone. I have been using a small lap loom with a degree os success and wanted to progress to something larger and purchased the said loom. well I cannot understand the instructions at all  HELP!!!  it looks from the main picture that each warp is fed onto the heddle by using a small loop of thread! this looks like it could take longer to warp the loom than weave the piece of fabric. Please can someone enlighten me? 

sally orgren

Here is a photo of a heddle jig, so you can make a bazillion string heddles, all the same size: (From the Bender loom box, Mennonite Museum, Kalona Iowa.)

 

SallyE (not verified)

Where is the warp beam?  It's kind of hard to see the back of the loom, but I don't see a warp beam, or a back beam that is at the correct height.

I see two pairs of horses, which implies 4 shafts, but I only see two treddles.   You could add two more treddles and two shafts if you wanted.

Also, that "seat" looks too narrow to be comfortable for any period of time, and maybe too far away from the breast beam. . . .

Submitted by elf35 on