Hi all, I have a 4s 48" CM loom. Is it common to leave unused treadles on the floor? Or for the sake of balance they should all be tied up?  Thanks

Comments

kerstinfroberg

When I went to weaving school we were told to take off every single thing not used... 30 yrs later (even 2 hrs later, when I was at home) I never bother. So, floor it is. I have heard some ppl like to tieup "for balance", but I've not felt the need for that.

Ellen (not verified)

I always just leave them on the floor.

ReedGuy

Let them drop to the floor, and if anything, they may come in handy as extra weight to the lower lamms. But taking them off is just silly. I do remove lamms not in use as they are in the way and drive me nuts when tying up. ;D

repweaver (not verified)

I keep all loom parts of my GlimÄkra 8H together no matter how many shafts are in use.

Sara von Tresckow

Once on the loom, parts stay there and get tied or not tied in such a way that they don't bother anything.  Treadles either lay on the floor if not being used, or remain where where they are if I don't want to undo the ties. If I have 8 treadles tied up and use only 4, I pay attention only to the tieup on those 4. Whatever is attached to the others so they don't bother me is just fine.

mrdubyah (not verified)

I leave 'em on the floor to minimize the number of "live" treadles and therefore the potential for accidentally depressing the wrong one. 

Fitzroy

I've only done one real project and I found the treadling really awkward. I had all 6 tied in different configurations but only need two for a simple weave and as such ended up with several occasions where the weave is not what I wanted it to be. So leaving them sitting on the floor is good news. I also restrung the whole loom with Texsovle heddles and cord and that should make tie up a lot easier. thanks .

Submitted by Fitzroy on