i am planning to weave upholstery material again, but i don't want to reinvent the wheel (read-sample too many times).

i want to do ticking and i have lots of 10/2 cotton for the weft.

any suggestions for the yarn i should use for the warp and the sett that would work using the 10/2 cotton for weft?

last year i tried upholstery material with 20/2 cotton which ended up as a hand-bag.....

 

Comments

MaryMartha

I cannot speak from personal experience, but as no one else has replied, here's a possible starting place.  In the Best of Weaver's book Twill Thrills, there is a project by Diane Ferguson (pp. 8-9) that uses 8/2 unmerc. cotton warp and 10/2  unmerc.cotton weft set at 24 epi, to yield a "slightly warp-dominant" ticking fabric.

Sara von Tresckow

The old European ticking was a 3/1 twill or 5-end satin with a weft face. You set the warp quite close and pack the weft in tightly, producing a very sturdy fabric suitable for sitting on. In addition to all cotton, you can also make an effective fabric with a cotton or linen warp and a worsted wool weft face.

I regularly finish off my drawloom warps with a bit of ticking - make up the strip as I go along, and use a weft slightly larger than the warp. I guess sampling would be best - within a smallish range, you can resley projects on the loom - closer or farther apart - with no negative impact on the fabric.

I'd go with maybe 16/2 cotton as warp so your 10/2 would be more pronounced, but 10/2 for both would more than likely work as well.

Sorry if this is not a recipe, but weaving is like making soup - you look in the cupboard, see what you have, make a stock and start adding to it.

Submitted by Anonymous (not verified) on