Our senior center received a donation of a floor loom and since I am the only weaver present, I was tasked to get it up and running. The problem is that the loom is missing some MAJOR elements and I can not identify the manufacturer. Can anyone out there help? Perhaps suggest web sites or other references ... Any help would be greatly appreciated.

Comments

SallyE (not verified)

I'm sure someone will be able to help if you post pictures.   It's impossible to help with the information you have given so far. . . .

 

Joanne Hall

Yes, photos will help.  And if you can list the parts that you need, that also will help.  Reeds are easy, lease sticks are easy, actualy loom parts are more difficult.

Joanne

booisme

I am new to this ... how can I post a picture of the loom? I am going to need "actual parts" including the metal brackets that secure the back of the loom, the entire brakeing mechanism, including the tension springs, and probably more.

jenjscott

Here is a weavolution tutorial on adding photos.  http://www.youtube.com/watch?v=E5ltD2y86MU

One of the best ways to find a loom name is to go to google images  https://www.google.com/imghp?hl=en&tab=wi   and put in a search phrase like "floor loom".  Now browse through hundreds of pictures to see if you can find some like yours.  You can click on the picture to go the the site and sometimes find information there.  Or at least you can use the location of the picture to post the photo here so we know what you are dealing with.

SallyE (not verified)

I think there are instructions to post under the help tab above.   The short answer is to click on that little green box that is just above as you write your post.

As for what pictures to post, post what makes sense and if we need more we will ask.   I don't know what kind of camera you use, but if the resolution is too fine it will cut off the edges of your photo, so you don't need super fine pics.   We just need to see what you are talking about.

 

booisme

I must be an idiot ... I can't find the "green box" to upload a picture. Please help.

Margery (not verified)

I believe they are referring to the very small box with the picture of a tree you see when you write a response.  If you put your arrow over it it says insert or edit image. Click on this.  

endorph

using Internet Explorer the box will not necessarily show up on some versions. It would be better to use Firefox or Chrome and then it will be easier to upload photos

booisme

Thank you for your help, but I don't see a tree

booisme

I finally signed on using another browser.

Here are the pictures:

laurafry

If it doesn't have a maker's mark it might be a home built effort.  Some current loom manufacturer's will sell parts i.e. Leclerc - which might be satisfactory to get the loom functional.  Otherwise a trip to the hardware store (not necessarily a big box store but a smaller one where the clerk's know something about tools and hardware - and I say that even though my dh works at Home Depot!).

cheers,

Laura

Joanne Hall

which is a Handweaving shop.  It looks like a Galligher loom and they built looms like this and started the Mannings shop.  Joanne

jenjscott

that is going to be a rug making machine once you get it going.  Another thing, I dont know the cercumstances of the donation, but once you know what you are looking for Maybe you could contact the donating party and ask about any extra stuff laying around.  They might not realize it goes with the loom.

jen

jenjscott

that is going to be a rug making machine once you get it going.  Another thing, I dont know the cercumstances of the donation, but once you know what you are looking for Maybe you could contact the donating party and ask about any extra stuff laying around.  They might not realize it goes with the loom.

jen

sequel (not verified)

Your loom looks like a Gallinger.  They were made and sold by the Mannings in East Berlin, PA.  The weaving width was usually 42". It is a direct tie-up loom with a sectional beam a big wooden drum and chain friction brake.  Yours does appear to be missing the side supports that hold the back up off the floor!  If The Mannings cannot help you, I can measure the one in the studio where I teach so you can go to the lumberyard.

Dawn McCarthy

Hi, I agree with Joanne, looks like a Gallinger, nice counterbalance loom!

 

Dawn

jennybellairs

If the donor is not familiar with weaving, they could have a whole pile of weaving things, and not have a clue as to what they are for.  If you can't go look yourself, describe what you are missing.  It wouldn't hurt to ask about other equipment such as shuttles, warping frame or mill, tubes of rug yarn, lease sticks, books etc. also.  The loom looks nice.  Hope you find the rest of it.

Jenny in Charlevoix the Beautiful

sequel (not verified)

We removed the sectional rakes from our Gallinger.  Not as easy as it sounds.  They are nailed from the inside of the brake drum.  If you do this, you will need a hacksaw to cut the nails.  Otherwise the rakes just unscrew from the beam. 

We also added a turnbuckle to adjust the tension on the brake.  Tom at the Mannings suggested sanding the drum with coarse sandpaper to roughen it somewhat and increase the "grip" on the chain.

Submitted by booisme on