I'm having trouble finding a guide that tells me what weight(s) and thickness(es) of yarns that I should buy for my 10dpi reed. I'd like to buy yarn online, but I want to get stuff that I can use now! Any advice? I read somewhere that "sock weight" yarns are the way to go---true or no?

Comments

Erica

The answer to your question depends on a number of factors. The main factor is the weave structure. I assume it your refering to dpi (dents per inch) that you're planning a plain weave project. You should look for yarn that has about 20 wraps per inch (wpi). I have a spreadsheet that I keep for the yarns I commonly use, however I don't have yards per pound listed for any of those yarns. I know that Halcyon Yarn lists wraps per inch, yards per pound and recommended setts for their yarns. So I suppose my answer would be to go to Halcyon Yarn!

I hope that helps,

Erica

mneligh

There is a book called Warp/Weft/Sett by June  H. Beveridge that has photos of 3 weave structures for most common sizes of yarn at most common setts.  You or you local guild need a copy, used is just fine.  Online sources tell you yards/lb., but if that information is not available use a McMoran balance (about $25 new) to estimate this.

The bottom line is there is no one correct answer, and while sock weight will work at that sett, you are really limiting your possibilities by only using that. For starts, weave structures that say "use tabby" imply that you use one weight for the ground weave and a heavier weight for the pattern weft.

Besides Halcyon, I have had excellent customer service at the Woolery, ParadiseFibers, and Village Weave and Spin.  Those 3 generally have a weaver that can come to the phone to answer questions.

Depending on where you live, you probably can contact a local weavers' or fiber arts guild.  They should know your local yarn sources and give advice.  Some may even make house calls!

texasreb (not verified)

I figured that there was no commonly used formula. I was hoping against hope!

Initially I don't mind limiting myself, because I have limited skills (very limited).

I might have that book in my stash...I'd better double check. I don't know why I didn't think to look there.

 

laurafry

You can do 15 epi (2 per dent, then 1 per dent) as well as 10 or 5 or 20 or 30 and so on.  There are charts for 'compound' sleying which will give you other options.  Just because you only have a 10 dent reed doesn't mean you are limited to yarns that work out to 10 ends per inch.  

Welcome to the wonderful world of weaving.  

ps - I'm assuming that you are weaving with an 'ordinary' loom, not a rigid heddle loom....plus you might want to check out weaving yarns rather than just knitting yarns for more options.....quite often weaving yarns wind up cheaper than knitting yarns because they come in larger packages (check price per pound to find out an accurate comparison for pricing).

cheers,

Laura

texasreb (not verified)

I recently acquired an 8 harness Schacht floor loom. I'm finding out that weaving is as simple or as complicated as I can make it! 

I took a class, but my instructor only covered warping an antique counter balance loom. We didn't go into fibers, reeds, patterns or anything like that. It was just enough info to whet my appetite.

ChrisWeaveMaine (not verified)

I'm new at this, but I've found Deborah Chandler's book "Learning to Weave" a great course in weaving, with lots of projects to help you learn to understand and draw your own drafts, calculate warp and weft, etc.

I started with inexpensive wool blend (Lion Brand yarn) and my 10 dpi reed to make sample learning projects -- which became popular scarves in my family.  I've even used acrylic baby yarn to make a baby blanket and learn to make twill designs.

I purchased several spools of 8/2 cottolin to make dish towels with my 12 dpi reed, but it's still waiting for me to finish the point twill scarves my granddaughters have ordered.  (Heavy acrylic yarn in an 8 dpi reed)

From what I've read wool is more forgiving to new weavers than yarn that is either too stretchy or not stretchy at all.  Hope this is helpful and not more confusing!

 

Bonnie Inouye (not verified)

Sock weight yarn is generally knitting yarn. When spinning for knitting, the goal is a soft, stretchy yarn to make a soft, stretchy sock. Weaving yarns are less elastic and more stable so you can use them for warp under tension. Weaving yarns usually come on cones which makes them easier to use when winding warps.

The 10-dent reed is a good size, very useful.

Before you buy some weaving yarn, figure out what you want to make. Scarves? Placemats? Table runners? Towels? Garments? Blankets? Look at the projects here to get some ideas. If you want to weave a scarf, think about how it should feel. Do you want a warm scarf or something more decorative? Yarns are usually listed with projects so that gives you ideas. A good introductory weaving book will help, as will a class or workshop on weaving. Maybe you can find a mentor at a local guild. Weaving magazines include projects with specific yarns and colors that many people follow when they are starting to weave. Your reed does not limit your yarn choice, and that's a good thing! Better to weave exactly what you want.

Bonnie

laurafry

Bonnie has given great advice - personally I'm a 'form follows function' weaver - I always decide on what I want to make in terms of quality of fabric, then make my yarn choices based on that.

If you want to learn more about fibre characteristics, I highly recommend the first version of A Guide to Textiles for Interior Designers by Jackman and Dixon.  (I say first version because it's still available on second hand book sites for cheap - the new version is expensive!)  :)

cheers,

Laura

Submitted by Anonymous (not verified) on