Can anyone identify this as possibly an Inkle loom?  It is quite old and the maker is no longer in business (Australian). Am very interested to know??

Comments

ruthmacgregor (not verified)

It certainly could be an inkle loom, if it looks like a few pegs are missing.  (I can't see the detail very well in this photo -- would it be possible for you to upload a larger version?)

It could also be some other kind of band loom.  Some large tape looms have a heddling system that pivots over the topmost peg (the clue for that would be in the pegs that are there, and the ones you can see are missing).  A setup like this could also be used with weaving tablets.

Very interesting.  If you could upload a larger picture, that would be super -- I'm now quite curious!

Ruth

sheweaves

Ruth, Many thanks for your response. I have uploaded a pic in larger format, so hopefully that will help in identifying. I notice that two of the pegs is adjustable via a slot system (tensioning perhaps?). Looking forward to finding out more...... Heather

sheweaves

Deb,  Many thanks for your reply. I had already taken a look at the similar one by Leclerc, which was what got me thinking about it! I had previously just thought it was a warping frame of some sort. Thanks again, Heather

ruthmacgregor (not verified)

Heather, it most certainly does look like a "floor" inkle loom -- you've got it!  This one has a very nice feature that I haven't seen before:  those flanges on all the pegs would discourage the warp threads from sliding off the ends.  (A great idea!)

Just from the faded spots on the frame, it looks like the top and bottom pegs on the right-hand upright are missing.  With those, plus a new peg stuck into the hole above the tension slot (for use as the heddle peg), you could put a nice warp on and put the loom to use.  It looks as though those extra holes in the frame would let you add pegs as needed to accommodate a longer warp.

Interesting loom!  Are you planning a project for it?

Ruth

sheweaves

Ruth, Thanks for the further info. I have located a great old book on Inkle loom weaving (by Helene Bress), which will be an invaluable resource when I get round to inkling! As a new weaver, I am currently focussing on getting my vintage 4-shaft counterbalanced floor loom up and working. The inkle will have to wait a little while or I'll get all sidetracked.

ruthmacgregor (not verified)

Helene Bress' inkle book is the best!!  Some of the illustrations are a bit dated, but the information is timeless.  She makes even the more complex things very accessible.

Five or six years ago my Dad was looking for something interesting and new to do -- something that would keep his hands busy and occupy his mind with little puzzles, but also something he could drop at a moment's notice if his attention was needed elsewhere (he was the caregiver for my Mom).  During my Christmas visit in 2005, we built matching inkle looms from the plans in Helene Bress' book.  He wove and wove and wove on his!  He also worked his way through all the chapters in the book -- an avid new weaver in his 90s.

Good luck with your counterbalanced floor loom (a super way to start).  I look forward to seeing your projects!

Ruth

kerstinfroberg

Perhaps a dumb question: what is an inkle loom? My best guess is it is a band loom with continuous warp? - I do have a band (floor) loom with both warp and cloth beams (and treadles) - can that too be called an inkle loom? (Also why *inkle*? nothing between ink and inkling in my dictionary...)

Joanne Hall

Hi Kerstin,

The US has some history of band weaving, but the inkle loom as we know it, was designed (new) in the 20th century to be a very portable loom.  Before the 60s, it was made primarily by one loom company but then many others started to make them, with varying quality, but all were basically the same design, a small loom with string heddles to put on a table or in your lap.  It was part of the explosion of interest in weaving in the 60s and 70s.

Joanne

ruthmacgregor (not verified)

Kerstin, the origins of inkle weaving are unknown, but the longest history of both the word and the loom are found in England (more on this in a minute).

The loom is peculiar and quite distinctive:  it's a lot of pegs in a frame, with one peg that moves somehow to allow you to adjust warp tension.  It is, as you guessed, a band loom with a continuous warp -- and string heddles.  Unlike your band loom, though, the heddles on an inkle loom do not move the warps up and down to create a new shed.  Instead, they anchor half the warps in place, and the weaver moves the non-heddled warps up or down (by hand) to create the sheds.  ...If you've seen narrow bands woven on a loom with a fixed rigid heddle, the weaving works in much the same way:  you make one shed by raising the warps by hand (and the heddled warps stay "down"), then make the other shed by lowering the warps by hand (and the heddled warps stay "up").

The purpose of all the pegs on the loom is simply to provide a path for the warp -- a warp storage area, if you will.  An inkle loom with lots of pegs can (usually) handle a longer warp than one with just a few pegs, because it allows the warp to follow a longer path.

It's hard to trace the origins of tools when they're used to make everyday objects.  The Oxford English Dictionary places the first known literary use of the noun "inkle" in 1541 -- but the term would have been in wide use before that.  At that time it referred to "a kind of linen tape, formerly much used for various purposes".  In other words:  a useful narrow weaving.  As the term evolved through the ensuing 200 years or so, "inkles" were seen as somewhat inferior bands -- maybe because they were everyday objects, maybe because they were more useful than decorative.  There's no way to know.

But "inkle" is very much related to "inkling".  The word "inkle" was used as a verb before it became the name for narrow linen tapes.  It meant "to communicate in an undertone or whisper, to hint, to give a hint of" (a usage dated to 1340).  An "inkling", therefore, would be an idea born of a mere hint.

I think it fits together nicely.  An inkling is to an idea as an inkle is to a piece of whole cloth. ;-)

Ruth (word nerd)


sheweaves

I now have more than an inkling ........ thanks Ruth!  Helene Bress does appear to make the apparently complex accessible. It's wonderful that your dad was willing to learn a new skillset too. My first few weaves have been on a table loom, but hope to "graduate" to the floor loom before end of the year. As an English language teacher, I really appreciated your bit of etymology.

Heather

kerstinfroberg

Thank you, Ruth! Was there a special reason for the use of continuous warp? (In my imagination, "ordinary" beamed warp is easier to handle...) I suppose a continuous warp can be woven into a continuous band (string heddles could be just cut off, made new for next band?). But why would one want a "closed" band?

Some of our old band looms (with beams, but obviously not with treadles) also use that type of shedding, called "lift-shed" and "press-shed" (translated as word-perfect as possible - what would that be in idiomatic weaving English?).

Joanne Hall

Hi Kerstin,

The Swedish band loom with beams and two treadles has been sold in this country since Glimakra looms have been sold here, and they are still available here.  And yes, it is much easier to weave bands on the Swedish band loom.

The table top inkle loom was designed as a portable and inexpensive loom for weaving bands.  The continuous warp design of this loom was just a simple way to set up the loom.  Extra dowels were provided to make the band longer.  And because of the take up in the warp, there had to be a tensioning device to loosen the tension after weaving a while.  But I don't think that there was ever a desire to make a continuous band.  

Joanne

Aunt Janet (not verified)

It looks like it may have been a regualr Cendrel Inkle loom, that has been modified to resemble a Swedish band loom.  It still uses the inkle system, but the pegs have been removed, and the beams have been changed for these flanged ones.  I like it.

Janet

ruthmacgregor (not verified)

Joanne, I agree -- I don't think there was ever a desire for a continuous band driving inkle loom design, either.  The last bit of the inkle warp can never be woven, and if the warp is striped, that last bit is often knotty (or tangly).

Putting a continuous warp on the loom is fast and convenient if you're weaving something fairly short (like a belt) -- and that's one advantage of the inkle loom.  Its portability is another advantage, even for the "floor" inkle looms.

But that's it, really.  The band loom with beams and some kind of shedding system is more efficient, and unbeatable (to my mind) for rapidly weaving long lengths of ribbons or tapes.

Ruth (who yearns for a Glimakra band loom, as you know!)

Ohioann (not verified)

I love my portable inkle because I can carry it easily to demos and it is simple enough to teach the basics of weaving to peiple who have no idea of how things are woven. You can share the loom easily with onlookers and they can have a successful "weaving" experience without risk to the loom.  When I'm home I use a two harness band loom similar to the one I saw at Hancock Shaker Village so I can produce more yardage but the Inkle is a great loom for beginners or demonstrators. The  one drawback is that the tensioning device gets a lot of wear and I have had to replace it.

Submitted by sheweaves on