Does anyone know how to retape an old reed? I have a reed in which the paper-tape-alien substance is cracking and peeling off. It's the part of the reed that covers the metal towards the top and bottom (the part that's mostly hidden and gets tucked into the beater bar. 

Comments

sequel (not verified)

Old reeds were taped with paper tape.  Do not use adhesive tapes like duct tape and the like.  Paper tape is the kind you moisten and then adhere, let dry.  Old fashioned mailing tape.  The purpose is to protect the ends of the metal "teeth" that stick out on either side of the wood.

Some people use duct tape, and don't mind the goo that you can never get rid of.  Others swear that paper tape would never last in their climate.  Whatever you use, make sure it doesn't go over (or too close to) the base of the metal teeth or the adhesive can get on your warp.  Leave about an eighth of an inch exposed at the base of the reed "teeth".

 

Dawn McCarthy

I have tried the gummy brown paper tape (from art stores) and it would come loose.  I have recently re-taped some reeds using duct tape.  I like the new design tapes, the width needs to be trimmed (as mentioned in above post to leave a tiny gap where the teeth are) but adheres well.  Plus leopard print bindings on my reeds make me smile!

Dawn

Weavin Steven

I like the idea of leopard-print, although if I can find tape with bunnies on it that would be good too. 

Thanks for the info!

Neshobe (not verified)

...but that is pretty boring compared to leopard print duct tape. It does have the advantage of having clean edges that don't leave gummy residue, though. 
Submitted by Weavin Steven on