I'm about to wind a warp of handspun linen singles, and as the yarn was spun from roving instead of long-line flax (alas!), I decided I wanted to dress it.

I followed the recipe for a flax-seed dressing in Kati Meek's "Reflections from a Flaxen Past", and all went as it was supposed to:  the flax seeds simmered nicely, and the liquid thickened, then got slimy, just as described; but when it looked ready and I tried to follow the innocent-sounding instruction, "Strain out the seeds," my world fell apart!  ...Maybe not quite as bad as that, but the lovely gelatinous substance refused to leave the seeds behind and pass through the sieve.

After a bit of a struggle (pressing the seed goop against the sieve with the back of a spoon, then scraping drops of strained gel off the underside of the sieve), enough dressing made it through into the jar to take care of my project -- but I'm curious to hear if there's a better approach than the one I used.  The dressing has the consistency of, um, a mass of frog's eggs, minus the eggs.  It's thicker than egg whites but has similar behaviour.  (It looks quite promising, actually.)

Is there a special way of straining the seeds out of the dressing that works better than my unhappy efforts?  Did I cook the seeds too long and let the dressing get too thick before straining it?

This will be the first time I've dressed a linen warp, and I'm eager to see the result!

Ruth

Comments

Joanne Hall

Hi Ruth,

When I did this, I strained it before it got so thick and there was no problem.  And I used it to soak the warp chain, so I never let it get as thick as you describe.

Joanne

ruthmacgregor (not verified)

Thanks, Joanne.  What was your clue for knowing when the flax seeds were done "cooking"?  Did you strain the seeds out as soon as you saw signs of thickening in the liquid, or when the first gelatinous streaks appeared -- or did you go by temperature?  I have the impression that once the fluid starts thickening, it keeps thickening whether it's on the heat or not, and will keep doing it until the seeds are removed (but have no idea whether or not that's really true!).

Soaking the warp chain makes sense to me -- though since Kati's book was so close at hand, and her recommendations were for painting the dressing on the warp as it comes off the warp beam, I'd planned on that.  ...Do you think, though, it would be better to pre-dress the warp before beaming?  I haven't even measured out the yarns yet, so any approach is still possible!

It's interesting to try something for the first time, after reading about it in lots of different places.  I have a general understanding of how things are supposed to work, but because I haven't yet done it myself, I don't really *know*.

Ruth

Sara von Tresckow

Painting or spraying laundry starch will work well, also.

Cellulose wallpaper past (without chlorine bleach for vinyl papers) mixed to your desired consistency is also easy to paint on the exposed warp.

WeaverDave (not verified)

would be to use cheesecloth.  Place the cheesecloth in a large bowl and pour the seed mixture over the cloth.  Then, draw up the edges of the cheesecloth and tie the corners.  You can then squeeze the liquid into the bowl.  Or, if it is subborn, suspend the cheesecloth over the bowl and let it drip for a few hours.

That's one way they would remove seeds from raspberries and some other fruits long ago.  It was originaly the way they would separate out the curd from the wehy, which is why they call it cheesecloth.

Joanne Hall

I think that I am older than you and I remember starching white shirts by dipping them into a prepared starch mixture and putting them back on the line.  So, having that experience might have helped.  The liquid needs to be fluid enough to get into the thread.  It might need to be a little thicker for brushing on the warp, but not very much.  Your experience will teach you.

Joanne

ruthmacgregor (not verified)

Joanne, I don't think you're older than I am (not by much, anyway!), but I don't remember starched shirts.  I *do* remember my mother starching her nurse's cap just the way you describe, though!  I'd forgotten about that....

In any case, thank you, all three! 

Dave, the cheesecloth method for straining out the seeds sounds like it would be perfect, and I'll definitely do that next time.  I haven't seen cheesecloth for sale around here, oddly, but I do have some nice, fine tulle net -- and a couple of layers of that will do the trick nicely.

Sara, I never would have thought of cellulose wallpaper paste -- and on your recommendation, I'll happily try it on a future warp!  I have sprayed starch onto a warp before, trying to tame a particularly fuzzy mohair (mixed success), but I haven't painted it on.

This could all lead to grand things.

For this particular warp, after thinking about your comments for a few days (and thinking about the reason I'm wanting to dress the warp) -- I think I'll soak the warp chain in dressing before putting it on the loom, then reserve some dressing to paint onto the threads as needed during weaving.  The yarn is a singles, and it's viable -- but I don't trust it, because it was spun from roving (short fibres) instead of from nice, long line flax.  This is a small project (narrow weaving), and the threads won't be subjected to much abuse; but I'm hoping the dressing will ensure that they all come through the process intact!

Thank you all again.  This is very helpful information!

Ruth

 

Neshobe (not verified)

artists often use Nori paste to mount paper tobecause it is completely reversible. It is also cheap and easy to mix up (it comes as a soluble powder. I have read that it is used in a slurry form as warp sizing in the orient for silk and other fibres. I have some on hand and am thinking that I would give that a try sometime when I feel the need to size a warp to make it more manageable. Thought I'd mention it in case it might be useful for you. Most art supply stores carry it.

BTW: I am old enough to remember my mom making starch for clothing and linens by grating a potato, letting it soak in water so the starch settled, straining out the grated potato, and then cooking it, adding water as necessary to keep it the right consistency!

Sara von Tresckow

Neshobe,

You have just described the method used by the German linen weavers of past centuries - in fact, there was a "proverb" in the linen weaving areas that weavers' children were cheap to raise - they only needed potato skins to survive. (Referring to the pots with potato peels soaking for warp dressing).

Joanne Hall

We have a lot of potatoes from our garden and when I grate them, I put them in water before cooking them.  The starch settles at the bottom of the bowl.  I have started to save it by pouring off the water and letting the starch dry.  It is used in Sweden to thicken sauces and desserts.  It works just like cornstarch.

Joanne

Sara von Tresckow

Potato starch is sold in European grocery stores like corn starch is sold here.

ruthmacgregor (not verified)

Now we're getting seriously culinary! ;-)  This is excellent information, all of it.  I have sheets of nori in my kitchen, but had never heard of nori paste.  That sounds like an interesting avenue to explore.

And the next time I go to the big grocery store, I'll keep my eye open for potato starch!  I haven't seen it for sale, but then I haven't been looking for it....

Ruth

kerstinfroberg

It may not be sold a "starch". In Sweden it is called (translated...) "potato flour" -  the starch bit only shows (on the package) in the fine print. It is found on the "baking" section of the shop.

If we want "starch", we have to go to the laundry section.

vanalpaca

Is there a recipe for the flax jelly or do you just boil an amount of the seeds in enough water to cover?.....

I am using woolen yarns for the warp and heard of this to help it from sticking together.....

Thanks!

SallyE (not verified)

"An amount of the seeds in enough water to cover" will produce a mess!

You will be amazed at how much "jelly" you can get.   Try 1 TB flaxseed per quart of water and strain it while sill warm.

 

Submitted by Anonymous (not verified) on