Are there any tartan weavers out there who can help me with what a kilting selvedge is and how to weave one?

I gather that it is just a very neat, straight selvedge with little to no draw-in that can be used as the bottom edge of a kilt without having to hem the garment.  Is this correct?

Is there anything more to it?  Tartans are typically woven in a 2-2 twill.  I typically use a floating selvedge when weaving twills.  Is this acceptable when weaving a kilting selvedge?  

 

Thanks -- Sara

Comments

Karren K. Brito

Have you checked her website or books?  She recently did a Michigan Tartan for the state.

laurafry

"A properly made traditional kilt should ideally use a fabric woven with a Kilting Selvedge. This means that instead of being manufactured on the high-speed looms that produce cheaper bulk materials, the tartan is woven on a shuttle loom. This slower process gives the kilt its distinctive cleanly cut bottom edge, without the visible fringe of the cheaper process using a securing thread, which would then require an unsightly hem.

After weaving, the tartan is washed, stretched, and pinned out on the finisher’s table using tiny tenterhooks to stabilise the fabric at the correct width. These pinholes will still be detectable on close inspection when new, but will close up over time. Once dried, it is pressed and steamed at high temperature to prevent further shrinkage, before a final inspection by skilled eyes."

Found the above - when I weave tartans I always begin and end my colours on the same selvedge so that one selvedge is not encumbered by the colour changes.  The other selvedge I just carry the colours up the side, clipping them flush with the cloth after wet finishing, including a good hard press.

If you don't know what a hard press is, I have a video on You Tube

http://www.youtube.com/user/LauraAnnFry1#p/u/14/V_toAtt_8zk

Worsted cloth does not rely on fulling but on the density of the epi/ppi for its stability.  (Tartans for kilts are traditionally worsted.)

When I wove a sample tartan for a mill the mill manager told me that he could not tell it had been hand woven.  I took that for the compliment he intended it to be.  :D

Kati Meek Reader would likely have a lot more info or Google kilting selvedge.  The above was the 3rd or 4th hit for me.

cheers,

Laura

fifthoffive (not verified)

Thanks, Karren and Laura.

Bonnie Inouye (not verified)

When weaving a 2/2 twill for a tartan, there is no need for floating selvedges. If the edge threads are correct, the selvedges will look neat as long as your weft colors are neatly joined. Laura's suggestion to carry weft colors along one edge and use the other one for the kilt make perfect sense.

There are quite a few videos of weavers in Scotland. I think any weaving book that includes basic twills will explain how to have neat edges without floaters.

Bonnie

Submitted by Anonymous (not verified) on