I just purchased this loom and don't know what company made it. There are two clear round stickers on it, but the image/text has long worn off. The reed was made by Southern Loom Reed Mfg. Co., but I doubt that the loom was made by the same company? Let me know if you have any insight, I'm curious to learn about it!

I am also wondering where I would be able to find a replacement reed measuring 20" long if you happen to know a good source. Thanks for any information :-)

Comments

Alison (not verified)

How deep is the reed?  Glimakra and Halcyon carry a wide range of reeds.  If I recall, Joann has 3" and Halcyon 4" reeds.

Sorry I can't help with the manufacture.

loomroomcat (not verified)

Looks like a Schacht.  Website is Schachspindle.com.  They make a 15", 20" and 25" in that same style. Very nice to weave on.  I had one for years.  they also make a floor stand for it.  Kinda pricey but works nice.

WeaverDave (not verified)

The levers create a rising shed.  Perfect for scarves, towels, table runners, etc.  But not strong enough to maintain the high tension for weaving rugs. 

The harnesses hold the warp threads about 1 inch below the level line between the front and back beams.  When harnesses are raised, they make a larger shed between the threads held down below the warp, and the threads in the raised harnesses.

I have a small list of web resources for buying weaving equipment on my site.  http://www.pvcloom.com/?page_id=140  The list of on-line shops is at the top.

Other than the reed, it looks like it's in pretty good shape.  Have fun!

Linda Ihle

could it be a Mountain Loom? looks like one our guild has

illoominated (not verified)

The Woolery sells custom reeds, if you need one.  I've gotten one for my Cranbrook and one for my Union Custom Loom from them at very reasonable prices.  They can walk you right through the measuring process over the phone then ship it to your house. The woman that takes the order over the phone, Nancy, is a weaver and knows all about this stuff.

Margery (not verified)

I agree witht he Schacht Loom - It looks like the one I had.

jandreja

Thank you all for the information. So it looks like it is most likely a Schacht loom. I'll have to check out the resources you all posted for a new reed. I am dying to get started on my first project!

Sorry it took me so long to figure out I had replies, I had (incorrectly) assumed I'd get an email notification.

Thanks!

Submitted by jandreja on