I am planning a warp in Spot Bronson from The Handweaver's Pattern Directory. I am reading Dixon's directions for the selvage and I don't understand this: 4, 1/3, 1/2, 1 in any sequence that will fit in with the adjacent threading. This is on page 172 and the pattern is on page 176. I appreciate any enlightenment you folks can give me. patty

Comments

Bonnie Datta (not verified)

Hi patty.  I've checked my book and I think that the source of confusion is the notation in the quotation and it would be clearer if shown like this:

"(4, 1) or (3, 1) or (2, 1), or (1,4) or (1,3) or (1,2) that will fit in with the adjacent threading"

Since the threading on page 176 ends in (1,2) ... (2,1), you can use either (1,4) or (1,3) on the left sevedge, and either (4,1) or (3,1) on the right.  You can't use (1,2) on the left or (2,1) on the right as these will create weft floats over seven warps.

 

She advises the use of a floating selvedge, so be sure that the entry side for your shuttle eliminates what could be a 4-thread float at either selvedge.

Hope this helps.

Bonnie.

 

 

weavinglibrarian (not verified)

That helps a lot. Every author has her own quirks, which is fine until my brain fails me. Patty
Submitted by Anonymous (not verified) on