I was given a loom to use for a living history project.  I have no idea if it is old or anything about it. I cant't find any information, name, date etc.

If I can figure out how to post pictures will get some pictures up.  I hope some one will be able to tell me something about it.

Thank you

Caroline

Comments

cbrazell

It is kind of fuzzy, I have some pictures if that would help.

Sara von Tresckow

It is a very ordinary 4-shaft modern table loom. They are out there in masses.

It would help if you'd look up some things about weaving at the local library and get a little idea of what you'd like to do with it.

Claudia Segal (not verified)

Photo loading has changed and we will be adding a new help topic this week. 
I have a couple of your photos so I will try to do it for you.  You start by clicking on the tree icon in the bar above the comment section.  Then, either enter the url from your Dropbox or from a Flickr account.  If you do not have either of those, click on the icon at the end of that field and then click on Upload and select your photo.

 

cbrazell

I got the loom cleaned up and took some better pictures. If that would help.  Are the bars on top normal, in looking at different looms I didn't see any like that.

Do you have any idea of the age for the living history it has to

be the right time period.

Thanks

Caroline

Claudia Segal (not verified)

Hi Caroline, With more pictures, I think some folks may be able to give you an idea of the date. I don't know how far back table looms go. Claudia

debmcclintock

Define the age/time period of your "living history" and we'll try to help. Exactly when do you need to have this loom set up?

cbrazell

The history of the loom would be in the mid 1800's.

Sara von Tresckow

Your loom wouldn't be any older than about 1965. That type of loom is modern, 20th century - first ones show up with the arts and crafts movement.

Mid 19th century weavers would have used a large counterbalanced floor loom.

cbrazell

Thank you all so much. Now next question, a weaving friend said I needed a biger reed, so where do I find reeds that are 28 inches long, 8dentand 6 or 8 inches high.

Thanks

debmcclintock

Caroline, as Sara said above in # 8, your loom does not fit your time period.  Check with whoever has you working on the "living history" and see if they have an objection to using the table loom if it is not period correct.  Don't put much effort/$$ into it if they don't want a table loom to be used.  Some museum/educators really have strong opinions on that issue.  You can study up on history and present weaving on a table loom and explain the principle.  You just need to make sure folks know that the loom is not period appropriate.  However, most folks will not know the difference and will think it is magic anyway.  Enjoy.

sally orgren

Unless rusted beyond cleaning or not the right height for the beater, you may use your existing reed, even if it is shorter than the beater. You are just restricted to projects that match the width of the reed (not the full width of the loom.)    •    Why 8 dent? What size warps are you planning to use? Historically, they would be finer warps. Early 1900's table looms typically came with 15 dent reeds and 20/2 cotton was standard (sleyed two per dent). There is not enough space around the front beam of these little looms for fabric made from thicker wefts (like rags) to build up too many layers of cloth.     •    I think you'll need to know exactly how high of a reed you'll need to order one. I would measure the current one, top to bottom (assuming it is the correct size for the loom). There are screws to adjust the top of the beater to the reed, but usually not 2" worth of slack. If too small, the reed may not be stable in the indentation made for it, and that effects how hard you may beat or squeeze the weft into the fell line. You want it solidly mounted, not a bit floppy.    •    On some of my looms, I can get away with a slightly shorter-in-height reed, but it requires some fudging to get it to position correctly. If I was buying new, I'd make sure it fits well. They are not inexpensive. (Shorter-in-width is never a problem.)    •    Keep in mind, stainless steel reeds are more expensive, but less prone to rusting. If you can afford to get one of those, that would be my recommendation, especially if the loom is going to sit unattended for periods of time, in a non-climate controlled location. (Yes, it will look shiny and new, not discolored and old)    •    Final note—undertaking a task like this will make you a much better weaver — more than you can ever imagine right now! And the rewards when you get a loom up and running and demonstrate to the public are numerous. The learning curve never stops, which makes it perpetually fun on a personal level. A final bonus, you'll get way-proficient at the warping part, which is always intimidating to newbies.     •    Sally (formatting does not seem to be working today, sorry for the inconvenience of no paragraph breaks.)

cbrazell

Thanks to everyone for their help and advice.  I am returning the loom, since it won't work for the living history project and right now I just don't have time to learn to use it.

Thank you all so much.

Caroline

Submitted by cbrazell on