Am I the only weaver who didn't know about this easy technique to rethread when using Texsolv heddles? Go to http://fiberarts.org/design/articles/texsolv.html and scroll down 2/3 of the page to the section "Two Neat Tricks." This trick just saved me loads of time. I just had a threading error in the middle of a 480 thread warp. Instead of having to rethread half my warp, all I had to do was slide a new Texsolv heddle into place. No string heddles, no muss, no fuss! 

Comments

Peg.Cherre (not verified)

Nope, I didn't know this trick, either.  I will DEFINITELY use it.  Thanks for sharing!

tien (not verified)

Oh, cool!  I had heard that this was possible but never quite figured out how it worked.  Thanks for posting this!

weaver-dyer (not verified)

It works!  I've done it, but found it very difficult to maneuver the "repair" heddle on a wide warp particularly when the warp is threaded, through the reed, and tensioned.

Janet

Weavin Steven

Yes, I agree, once you've fully wound on, it would be difficult. But if you catch your threading error before, it's easy to move the heddles to the left or right of your harness.

kerstinfroberg

I have stopped doing that, unless the error is very near one of the ends. It is much easier/faster to tie an extra heddle in - only IMO, of course!

Also, FWIW, I have stopped using the "anchor" pegs. Arrow pegs (nearly) never fall out.

Submitted by Weavin Steven on