I could use a lot of help with tying up my 4 harness 6 treadle Hammett loom. The treadles were hinged on the front when i brought the loom home. I have since turned them to where they are hinged on the back but now treadle 3 and 4 are too close together and are hitting each other. Also, the lamms hit the bottom of the harnesses. This is so frustrating! Can anyone help me or provide photos as to how and what i should do? Thanks so much. (I have been weaving a little over a year on other looms).

Comments

kellytwo (not verified)

I have a 45" 4H 6T Hammett loom, but I haven't used it yet because we're restoring our 19th century barn and making a weaving studio in part of it, but it's not done yet. As soon as I can, the Hammett loom will be up and running. My treadles are attached in the back and everything seems to be in working order. I will post pictures as soon as I can, but maybe it would be helpfull if you posted pictures of what your loom looks like where the problems occur. 

Doreen

Joanne Hall

Assuming that the loom is tied up correctly, the most common mistake is to tie the treadles too high.  And you will not know how well it works until there is a warp on the loom and it is tightly tensioned.  If you have a warp on, then just tie the treadles lower by making the tie-up cords longer.  You are most likely making a shed which is too big.  If that is not the case, send more information or photos.

Joanne

Submitted by Anonymous (not verified) on