Hi, I learned how to weave back in the 70s wove off and on til the early 90s, now retired getting set up to weave again-and I am stuck--I didn't think everything thru, so now I am running into little glitches. the pattern is from an old issue of handwoven I need 24 epi, the pattern says to use a 12 dent reed two per dent. Not thinking about this, my loom is threaded now except for the reed. my reeds are 10, a 6 and a 14.   the draft is set up to have a 17" weaving width.  If I want to use my 10 or 15 reed-how do I figure out how to sley the reed to get my 24 epi or closest to it thanks so much Kathyinozarks

Comments

Michael White

Use a 6 dent reed with 4 warp threads per slot. 6 x 4=24 epi or the 10 dent reed with 4-6-4-6-4. Your choice of reeds depends on the size of the yarn you are going to use.

Michael

sally orgren

First, welcome back to the world of weaving! I have to admit, in the early 70's I was a little kid turning out multi-colored polyester potholders on a metal potholder loom, nicking my pint-sized fingers on those sharp little metal ends. I was also playing with Jarts, cooking plastic "Fun Flowers" on an exposed hot plate, and all my friends were breaking their arms, legs, and collarbones on the neighborhood trampoline. (OK. That was a fun side-trip down memory lane! ;-) 

Back to your sett question. I am not sure I would be comfortable with so many threads (4 or more) in a single dent if you are using a fairly fine warp, like 10/2 cotton. I would be worried about tracking.

I might be more likely to try the 15 dent, sleyed 2,1,2,1,2,1, etc., because that comes closer to the sley-order originally intended. That means you end up with the first inch @ 23 epi, the second inch at 22 epi, etc.

If this draft calls for 10/2 bamboo or tencel, you would be perfectly okay to go to 30 epi (2 per dent in the 15 dent). Keep in mind if you increase the sett, it will have ramifications (i.e. narrower warp, or you have to add warps and adjust the design accordingly to maintain the original project width.)

Not coming from a mathematical background, I use a pretty simplistic way of figuring sett if I don't have the charts handy, as you can see!

BTW, something to consider. A 15 dent reed was common on looms in the past, but a 12 dent has become the standard for some time now. It might be worthwhile to obtain a 12-dent for your loom if you want to weave more of the contemporary drafts. (I own a 15, 12, 10, and 8 for each loom width.)

We'll be looking for your project post once you get underway with the weaving, so don't forget to post a photo!

Sally

kathyinozarks (not verified)

I just today got notified about all your replys to my question-thank you all sooo much. I am saving this information for future projects.

  I ended up using 4 dents in my 6 reed and is working out well so far I am up to my second towel now

Submitted by Anonymous (not verified) on