patterns on a counterbalance

I am fairly new to this type of loom. I put on a bronson spot weave a while ago and found it was unbalanced with no shed on one treadling.  I had to weave part of the design by hand manipulation.

Can anyone help me with chosing a patterning that will be easy to treadle and give a good shed. I want an inset of 3 inches, of a different colour, in the warp each side and will weave the weft to match making a square blanket at 8 epi an my 45 inch loom.

I have the sizes and epi sorted everythingis wound and ready to go, it is just the threading pattern I am at a loss over, any suggestions would help.

Comments

Claudia Segal (not verified)

You could weave the blanket in plain weave and thread the loom (I am assuming you have4 shafts) 1 2 3 4 and then treadle 1-3, 2-4 for plain weave. You could do a direct tie-up with one treadle for each shaft and use both feet to treadle. You can add color to the warp as you have suggested and then repeat it in the weft. Looking forward to seeing pictures in you Projects folder as you weave. Claudia

Susan F

Maybe I should just do a checkered fabric using colours until I get more used to how much the loom can and cannot do.

Thanks for the encouragement, I might need more help when I set up the 8 harness AVL. Oh the possibilities on this baby!!!

Claudia Segal (not verified)

Well, Susan, as a very wise philosopher once said KISS (keep it simple stupid) and that's my motto when it comes to getting used to a new loom or a new design.  Simplify until you learn how to move forward.  A spot Bronson is a bit ambitious for a first project, if I understood correctly.

I have owned a few (8) looms in the few years I have been weaving and I have found it takes several months for a new to me loom and me to become friends.  I tried for 2 years with one loom I loved, in theory.  In practice, we were no good together.  I now have a loom I never imagined I would own and in just 6 months we were very well acquainted.  I trust myself and I feel I understand most of what the loom can do.  It takes some months so be patient.

This may sound nuts but it my personal notions.

Claudia

Jeanne-Marie (not verified)

Hi Susan,

 I have a counterbalance loom and there are times when certain patterns are off my list on it because of the need to always have two sheds. But I have been weaving on it for almost 18 years and I do love it. You do have to look at the lift plan when picking a draft. Swedish lace is one of the lace weaves that work well on a counterbalance. Overshot is amazing to work with on this loom. If you have a chance to look at Maguerite Davidson's Handweaver's Pattern book. Most of the drafts are not only counterbalance friendly but written for sinking shed.

Best of luck with your adventures with it!

Sara von Tresckow

The mechanism used to set up a counterbalance loom influences how the sheds form. The CB looms that operate with sticks and pulleys are more difficult to tease into odd shed configurations than those that operate with horses.

In Laila Lundell's "Big Book of Weaving" there are clear instructions on how to tie up for any nyumber of shafts between 2 and 8 - including 3, 5 and 7.

As is often the case, the myth has grown up around counterbalance that everything must always be in pairs. Might be "easier" that way, but with a little skill and effort, you can get a nice shed for just about anything.

 

Susan F

"Well, Susan, as a very wise philosopher once said KISS (keep it simple stupid)"

Thanks for the input Cludia, I have been weaving for quite a few years but always had a jack loom. I then found I did not have the strength or weight, length on leg to lift the shafts easily, so I went to a CB.

Now I find the bronson spot I love to weave on the jack was not behaving on the CB, the shed on part of the pattern was only 1 inch so I had to pick it.

I was hoping against hope that there was a pattern book out there on the CB. I was looking for an easy way out but I guess there in not.

Susan F

In Laila Lundell's "Big Book of Weaving" there are clear instructions on how to tie up for any nyumber of shafts between 2 and 8 - including 3, 5 and 7.

I will look for this book.

I guess it was time for a new challenge for me, It keeps the grey cells multiplying so it is all good.

You are right about the myths a few people have raised their eyebrows when they heard I had changed to a CB some even added an Oh no!

I do like the loom and it it easier to treadle and I like the deep shed it gives, I think I will stick with it. I still have the 45 Jack loom so I guess I should sell it now.

lkautio (not verified)

I like spot Bronson too.  With the advantage of allowing 3 blocks on 4 shafts, the classic patterning, and the ease of weaving it is worth pursuing Sara's suggestions for setting up a cb.  You might also check on the LeClerc website for more information on cb with unbalanced sheds. I've done it so I know it works, but it was a long time ago!

In the meantime, think about what it is you like most with the spot Bronson and try other weaves that will provide some of those characteristics.

You could explore M's and O's as a simple substitute.  Although limited to two blocks on 4 shafts, it works with balanced sheds and gives a lacey appearance.  You can vary the repetitions to get smaller blocks  and the treadling to get more of a spot Bronson appearance. 

Another interesting substitution for the spot would be to try crackle and overshot with a single shuttle and a yarn similar to the warp.  Keep the block size on the smaller side on the overshot (look for miniature patterns). That gives you four blocks on 4 shafts and a lacey effect, though more complex than the spot Bronson on 4 shafts.  Again, the sheds are balanced.

Have fun!

Laurie Autio

 

Submitted by Susan F on