Hi!

I was wondering what makers ever made an 8 shaft counterbalance loom?  Vintage? New?

Thanks

Candace

Comments

Dawn McCarthy

Hmmm, don't know of any specifically 8 shaft counterbalance looms, but my Glimåkra has 8 shafts with drall pulleys which is a counterbalance action.  Why counterbalance?  Countermarch with 8 shafts works so much better IMO.  I have both drall pulleys and the countermarch for my loom.

 

Dawn

Claudia Segal (not verified)

My Glimakra Standard is an example of one. I am fairly certain they still make this loom. If you are looking for one you should check the Glimakra website. It's Glimakrausa.com

kerstinfroberg

While I have NO problem with the fact that Joanne is selling Glimåkra products in the US, the fact is that the manufacturer (ie the place where the looms are actually built) has a website too: http://gavglimakra.se/eng/index.html. It *could* be that the ones actually making the looms has the most up-to-date listing. (Though I could be wrong - it could also be that the retailers have, er..., out-of-date(?) stock.)

I suppose I should apologize immediately: I apologize for being rude. I really do.

The thing is: once in a while I get a tiny bit tired of being always seen as ... what? exotic, maybe? - just because I (we, in this case) are not residing in North America. So many of us (like Glimåkra, for instance) really try to inform weavers from all over the world how to find us - Glimåkra lists dealers from 8 countries outside Sweden - .

Kerstin (born, raised and still living/weaving in Sweden, though not on a glimåkra loom)

 

celtinbirks

What does the above post from Kerstin have to do with my original question?

debmcclintock

If you go to the link Kerstine gave you and look at looms there are a variety of shedding mechanisms available that address your original question. That's the "mothership" site. The US site distributes from the mothership :)). Both have good info, they just happen to be on two opposite sides of the ocean.

celtinbirks

Oh, thanks for clarifying that for me, Deb.

Joanne Hall

Hi Candace,

There is not a lot of understanding of counterbalance tie-ups here in the US.  And the counterbalance looms made here or in Canada are usually made with four shafts in such a way that it would be difficult to add shafts to them. And they usually cannot be changed to be tied-up as a countermarch.

Traditional Scandinavian looms are often made so that you can tie up the loom as you wish.  If you just have the knowledge and the pulleys and horses, you have choices in how you tie up a loom.  For instance, a Swedish loom can be tied up as a two shaft loom, either counterbalance or countermarch.  I have even tied one up as a reverse jack loom using the ordinary elastic bands to hold the shafts up.  But you can add up to 8 shafts on small looms and on other larger looms, up to 10 shafts, tying them up counterbalance or countermarch, if you purchase the countermarch or the extra counterbalance horses or the drall pulleys.  If you add to your countermarch you can tie up 12 or more shafts and treadles. When you go beyond 12, the shafts, lamms and treadles need to be thinner to fit them all in.

These looms are not either counterbalance or countermarch.  They are versatile looms which can be tied up either way.  You can even tie them up as jack looms, but there is seldom a reason to do that.

Joanne

 

Sara von Tresckow

Back around 1980 when I purchased my first full sized floor loom, ALL of the European makers of the big standard looms with overhead beaters that we now refer to as "Glimakras" though there were MANY makers, sold their looms as a counterbalanced loom with the option of purchasing the countermarche setup for more money. My old Lilqvist from Finland came with a set of pulleys (got lost somewhere in a move) and I purchased the countermarche pieces for 8 shafts/8 treadles. When I needed 2 more treadles, we just copied the existing treadles and plugged them in.

The basic frame construction and overhead beater are pretty much constants (exception being the models with underslung beater that resemble the Toika Liisa and are primarily rug looms) allows considerable modification. Now there is even the possibility of hanging a Toika computer assisted dobby box on the standard European (yes, what is referred to as a Swedish or Scandinavian loom is also found all over Europe - tons in Germany, Holland, England, etc.) loom frame. Peter Collingwood was a master at modifying what is essentially a sturdy frame with capability for weaving quality fabric.

The "Big Book of  Weaving" shows a variety of tieups for counterbalance looms and the looms are out there - or could be made new. Oxaback will still put one together, though the fact that they are now listed as  "ask for pricing" indicates that the countermarche looms are the better selling models right now. I know that when I bought that loom in 1980 you could easily order an 8-shaft counterbalance loom. That was about the time that Texsolv buttonhole cord came on the market.

Until the Texsolv cord replaced the old snitch knots for countermarche looms, the tieup process was usually more difficult than home weavers wished to deal with. The use of a single cord with adjustment holes made the countermarche something that most any weaver could learn to use. Prior to Texsolv, countermarche looms were mostly found in the workshops of professional weavers who had apprentices to deal with the connections between treadles and lams.

I saw many counterbalance looms with more than 4 shafts when I learned to weave(in Germany) and did not ever hear that the cloth produced on those looms suffered in any way for not being CM.

If you are looking for the counterbalanced loom, keep your eye on the used loom classified ads - there should be some vintage ones out there - or you could add shafts and treadles to a barn loom with 2 or 4.

Submitted by celtinbirks on