Need help. Replacing all the cords. Built in the 60's, Leclerc Fanny 36". What I need are some measurements for the cord lengths. (1)Top large roller to two small rollers. (2)Small rollers to top of harnesses.(3)Bottom of harnesses to lamms. (4)Lamms to treadles. If you have this loom, all I need is the distance between the rollers,harnesses,lamms and treadles. I can figure the cord lengths with these measurements. Picked this loom up last Sat. in Dallas. Cleaned it up on Sunday. Now it's back together and need to re-tie-up it. Looked on the LeClerc web site. Even the old Fanny model there, was different than this one. Have the Texsolve cording and ready to tie-up. Thanks............Steve

Comments

Weavolutionary

Hi Steve,

I searched on Fanny and clicked on Loom up there in the search and found posts by Laura Fry, Dawn McCarthy, Monica Bellas, and btcustis (all their Weavo user names).  You might try contacting each of them in one PM if no one responds here.

Claudia

Joanne Hall

Hi Steve,

These measurements are not really so important, since there is plenty of space for the various parts to move.  The important thing to remember is that the height of the shafts is just like your Glimakra.  The warp threads need to travel straight from the breast beam to the back beam.  The two dowels between the shafts and the top dowel just need to be about equidistant between the top of the loom and the shafts, but the exact measurement is not important.  The lamms are attached to the shafts with the V shaped metal part. Do you have those?  Use Texsolv cord and arrow pegs to attach the treadles, as the cords that Leclerc supplies are too short.  They need to be longer to put the treadles lower, so that it is not so hard to put your foot on the treadle.  And, while you are at it, if you want to weave on this loom, put it up on blocks.  It is more comfortable if the loom is taller, even for me, at only 5' 3" tall.

Joanne

laurafry

Hi Steve,

I can measure the loom later today if you like - have appointments this morning.   :)

cheers,

Laura

steve104c (not verified)

Thanks Joanne, I have some texsolv cord but need to order the arrow pegs from you. I need to see if there is anything else before I call you.

Laura, Please give me some measurements so I have some idea where to start...............Steve.

laurafry

Hi Steve,

Measured my loom this morning.  

The gap between the top roller and the small roller is 6".  On my loom the cord is 21" long.

The gap between the small middle roller and the top of the shafts is 6".  On my loom the cord is 18" long.

The treadle cords are 6" in length not counting the knot.

Hope this helps....

Laura

Joanne Hall

I remember that you sent a photo earlier and it looked like the loom has the shed regulator added.  That makes the tie-up a little different, but you can find that information on the Leclerc website.  There should be a spring to tie up the added shed regulator dowel at the top.

Joanne

Submitted by Anonymous (not verified) on