I have a new cone of Astra 3/2 mercerized cotton in white, which I plan to use for the warp for 6 cotton placemats --- mostly plain weave with some leno near the ends. What would be best to use for the weft? I only have a 10 dent heddle so far (for Kromski Harp), and I will probably use that, since I have seen elsewhere on the list that it will be fine for 3/2 cotton. I would love any suggestions for actual brands of yarn for weft, especially yarns that will not bleed onto the white. I am planning to use a dark blue or burgundy, but am leaning toward the blue to minimize the chanze of bleeding. I am assuming that mercerized will be best, since that's what I'm using for the warp. 

Also - I plan to weave scrap yarn between placemats, then serge them at edges before separating........then hand stitch the hems. Good?

 

Thanks much - 

Cindy

 

Comments

laurafry

3/2 cotton is kind of thick - you might find hems too thick for the purpose especially if you also use 3/2 for weft.  How about hemstitching on the loom instead?

Cheers,

Laura

Michael White

as Laura has said folding over 3/2 would make a big bump on the ends of your place mats. If you need the same colors in mercotton I can sell you UKI Yarn in 3/2, 5/2, 10/2, 20/2 all in the same color. Check out my prices at;

http://www.handweaver.us/georgia_yarn_company.htm

Michael

clgy (not verified)

Laura,

Thanks for your reply. I have tried hemstitching on another project, so I could do that......do you mean and leave fringe? I wasn't sure I wanted to leave fringe for these, as I like a "neater look" for placemats. Is there any other option? If I use 3/2 for the warp and something finer for the weft, will it still be too thick? Can't wait to find out. :) 

clgy (not verified)

Michael,

Thanks for your reply also. I will take a look at your site and see what some of the other options are. I'm glad you both mentioned the heavy seams, before I managed to get myself to that point! :) 

Michael White

with hem stiching sounds like a plan to me.

Michael

laurafry

If you keep your fringe about 1 inch long after you cut them off the loom, the fringe will actually keep quite nicely.  You could use something much finer for weft, but the 3/2 is really quite thick and the fold will build up.

cheers,

Laura

EzekelG (not verified)

Hemstiching seems to be very interesting but i think onle few people have time doing it.

Claudia Segal (not verified)

I find hemstitching while a piece is on the loom the faster finish you can do.  It beats taking it off the loom and stitching it on the sewing machine and it beats taking it off the loom and tying fringe in bundles.  With the type of hemstitching I have learned, you use extra weft and with the item stretched on the loom, after you complete the first 4 picks, you hemstitching in small groups across the warp.  My biggest problem with hemstitching is remembering to write down on my project sheet that I hemstitched the first edge so I remember to do the same on the second.  But that can be fixed easily enough if need be.

What sort of hemstitching have you tried EzekelG?

Claudia

clgy (not verified)

I agree, Claudia, it's *so* much easier to do the hemstitching while the project is still on the warp, all nice and tight. I tried it with my last scarf and it went very well, but on my most recent scarf, it just didn't seem as nice and even. Still, it wasn't bad, on the first end, but I removed it from the loom to do the second end and found the lack of tension made it much more difficult. I'm still trying to figure out how to always work right to left while on the loom though! :) 

Claudia Segal (not verified)

The best book I have found for all sorts of scarf finishes and a great description is Virginia West's Finishing Touches for the Handweaver.  

As for working left to right or right to left, you need to figure out how to end your weaving at the correct selvedge.  Easy to do with plain weave but not all structures cooperate.  You could lay under you loom and stitch going righ to left if you end on the wrong edge.  Do a little Michaelangelo?

Claudia

Please check out the Scarf Finishes group.  Many great ideas there or HERE.

weave2 (not verified)

with Claudia.  That's one of the top books to use for finishing.  The finishing really helps to enhance the piece.

clgy (not verified)

Funny you should mention that; I found it at the library, and thought it was excellent, so bought an old copy on ebay. I will go ahead and figure out a nice "finish" for the placemats and let 'em have fringe this time. Next time, though, I'd like to try some that are hemmed. What is the best weight (8/2, etc.....) for that? I just received my sample card from Halycon so if anyone has any suggestions I can refer to that. Thanks.  

Claudia Segal (not verified)

I am not a rep for any company but I do have a lot of experience with Halcyon Yarn, 8/2 cotton.  I like it a lot but when I did a strength test on a brand new cone, it popped.  I called them and learned that their Homestead cotton is spun more softly than UKI 3/2 or 5/2.  Undaunted I used it on both my countermarch and rigid heddle looms and am very happy with the result.

I would like to use finer cottons but have very bad hands and eyesight so 8/2 works well for me.  I used 4 colors of 8/2 here and here they are doubled.  I used 10/2 for the ground warp here.  

If you search for cotton on Projects you can find people who have used all sizes of cotton.  Here is a nice dish towel with 8/2 cotton.  

Evelyn (not verified)

You could weave enough for the hem turn under in a finer yarn, then the balance of the matt in the 3/2.

Submitted by Anonymous (not verified) on