Is there a preferred method for fringe on a scarf? I found one project here that mentioned hemstitching instead of hand tying worked well. Also, different subject, but with an angora blend of yarn which won't serve as warp due to breaking, what would be a good warp compliment? 

I wish there were a simple forum for dummies or beginners, so as not to clutter up the board with inane questions for the pros.

Comments

naturalfibres (not verified)

I generally do a twisted fringe on my scarves, so that it doesn't fray, but I guess it depends on what yarn you are using and how the scarf will be washed - hand wash, done in the machine, put in the dryer.  I tend to make things that are easy to clean - washer and dryer.  Plus, I don't think that there is even a place in town to get anything dry cleaned.

As for as asking questions, that's what we are here for, and there is also a beginners group http://weavolution.com/group/weaving-101

sewdoggie (not verified)

thanks for the link! I hadn't realized there was one, that's where I belong. When you do the twisted, is it tied as well? It's wool and bamboo, so I'll be using SOAK or Eucalan. (handwash)

laurafry

Yes, you tie the end of the fringe to hold the twist in place.  Since the yarn has bamboo in it, I would definitely fringe twist.  After wet finishing I trim the frayed 'whiskers' off so that the fringe looks neat and tidy.

cheers,

Laura

sewdoggie (not verified)

I keep seeing people refer to wet finish, is there a place it's described? I have a diagram of the twisted fringe, unclear on number of strands. Since it's sock yarn, would I be using just two together?

kerstinfroberg

Wet finishing is what you do to your cloth when it has come off the loom. Depending on what you have woven, it can be done to the whole length, or you might want to make the separate items ready before wet finishing. In this case, I'd recommend you twist your fringes first. Or it could be, say, towels - then it would not be necessary to cut and sew prior to wet finishing.

Wet finishing is not quite the same as washing, but it often looks like it. If the cloth is cotton (towels, above), pop it in the washing machine. If it is wool, wash it by hand (unless you want it item to "full", which is almost the same as "felt").

Laura Fry has written THE book on wet finishing - described on her website. Go to "store", find "Magic in the water". She also has several tips on her blog, and she has some video clips on youtube. 

As for how thick (how many strands) you want the fringe to be, it is up to you. Test some different numbers and see what you like. If you don't knot at the end, you can take them out again, and then do all of them in the same size. I have some entries on fringe twisting on my blog, and there is a group here on Weavo, all about scarf borders and finishes

Good luck!

 

Claudia Segal (not verified)

Figuring out the number of strands is more personal taste than anything.  It's a good idea, like when you start a project, to sample the twisted fringe a couple of ways before you decide.  Since sock yarn is on the thinner side of bamboo yarns, I would try twisting 2 groups of 2 strands each and tie them together loosely and see how you like the look.  Too thin? add one more, too thick, take one from each group.  

When doing a twisted or tied fringe you can improve the look by doing this little trick.  If you are using 2 strands in each twisted bundle, starting at the edge take warp thread (now fringe thread) 1 and 2 in the first bundle and thread 3 and 5 in the second bundle.  Twist them both in the same direction and I like to count the number of times I twist, then tie them together at the end and let go.  They will twist together.  Your second group of fringe will hold threads 4-6-7-9.  By crossing the threads in this way you avoid having a divet between fringe bundles.

Once you are done, wash your scarf (wet finish) in the manner in which you would treat that fiber.  Wool is usually done in warmish water to allow it to full slightly and the web (fabric) opens up and blooms in a way.  For bamboo, I would also use warm water but there are others who are better qualified to answer this question. 

Claudia

sewdoggie (not verified)

Thanks to you both! I appreciate your time more than you know. If I were one of the old hands at this, I would tire of newbie questions, but people here seem to really enjoy answering. bless you

debmcclintock

Hi, you might also want to check out and join the scarf finish group here:

http://weavolution.com/group/scarf-borders-finishes

I have had a major medical event in my family so I have not been able to post often but this group has some nice explanations and photos of how folks finish scarves.  We also wandered into some rug finishes also.  Enjoy  Deb Mc

DianeOregon (not verified)

Is there any sort of rule of thumb about how long fringe should be for a scarf?  I'm working on a pinwheels scarf in 8/2 tencel, and I'm just starting the second scarf on the warp, and it occurred to me that I didn't leave enough space between scarves for fringing both scarves.  I think I'll unweave what I have so far (only 24 picks) and add some more fringe space.

Thanks for any input!

laurafry

When I'm twisting fringe I generally leave about 6".  After twisting that usually comes down to around 2.5 to 3 inches in length.

cheers,

Laura

illoominated (not verified)

I love this gadget for making fringe or twisted cords to use when I'm tying my warp.  My hands and fingers aren't what they used to be, and this little tool makes twisting all those ends less daunting.  It's available at most weaving stores/sites.  But, here's a picture from my local weaving store.

http://www.woolery.com/store/pc/Leclerc-Fringe-Twisters-p6896.htm

Submitted by Anonymous (not verified) on