I have a draft for a shadow weave shawl (bamboo yarn). It was written for a 10 dent or 15 dent reed. I converted for my 12 dent reed--sleying 1-1-1-2 in the reed. I've checked and my color order and tie up are correct. I've been weaving for a few inches---and no pattern is emerging. Nothing at all like the picture I have of the finished shawl. I looked from both the top and the bottom--no pattern.

So, is shadow weave something that does not "take well" to changing the reed size? What is shadow weave? I looked for guidance in Learning to Weave and Mastering Weave Structure and shadow weave isn't in either index.

Thanks!

Comments

Karren K. Brito

Please descibe how you are weaving it.  This is a two shuttle weave.

QuakerWeaver (not verified)

I have two shuttles--and the draft has me alternating the shuttles (one dark, one a lighter shade) with every pick.

sally orgren

Sleying shouldn't make a difference in shadow weave. However, if you don't have enough contrast between the two colors, that can affect the success of color-and-weave-effects. Can you post the draft or a photo so we can see? I hope we can get to the bottom of this mystery!

Dawn McCarthy

Try starting with the opposite color!  So - if previously on pick 1 you used black - use white.  Usually with shadow weave you lose the pattern when you are using the wrong shuttle color on the pick sequence.

 

Dawn -

 

bloominloom-dawnmccarthy.blogspot,.com

QuakerWeaver (not verified)

Here is a photo (and can I just add that the help section on this website with linking video is the absolute best!).

It should be 15 ppi, I count it at 13, so I know I've got some work to do there--these are the first rows of the project.

It is a draft from Handwoven--so I don't know if I am permitted to post the draft. Can someone offer guidance?

Dawn McCarthy

If you blurr your eyes you can barely make  out the pattern - try switching the sequence of shuttle color - if you started with yellow on the first pick, now try starting with the green color then the yellow or vice versa.

 

Dawn

 

 

QuakerWeaver (not verified)

Thanks Dawn--I'll give that a try today.

Claudia Segal (not verified)

It is my understanding that if it is a draft that is available in the public domain, you may post just the draft NOT the whole pattern.  I have been told that many drafts are in the public domain because weaving has such a long, varied history that it is unlikely a draft can be claimed as new.

Information on copyrighting of drafts can be found in the University of Arizona weaving collection.  Here is a link to their info on copyright. They compare a wif file to a recipe and I quote: A weaving draft is much like a recipe. Take WIF {3}, the standard for draft exchange, as an example. It is a textual description of the facts needed to make a woven fabric — the tie-up, the threading and treadling, the warp and weft color sequences, and so forth. A WIF cannot be protected by copyright except for possible notes and comments, which are incidental to the factual weavinginformation. The same applies to other formats for weaving drafts.  

This is a very difficult and complex issue and I am not an attorney so it's best to be cautious.  You can also consult handweaving.net for drafts that are available in the public domain.  

Claudia

kerstinfroberg

Sorry, foreigner here: what is a "draft" as compared to "pattern"?

My guess is: pattern includes quality (yarn type & size, sett, where to buy the yarn...)?

Karren K. Brito

I agree with Dawn,  put in a double shot of one color then continue to weave and see if the pattern is clearer.  You have chosen low constrast colors for a pattern that depends on contrast to show, so the pattern will never be dramatic but subtle.

Margriet Carrico (not verified)

I have done a lot of shadow weaves over the years and found that the pattern shows up much more when the fabric comes of the loom and is washed. Try to take of a sample and finish it you might be surprised.

Alison (not verified)

Yes, you got it.  As Claudia pointed out, it is very difficult to claim a draft as their own, though some of the network weavers who are pushing those bounds may be able to do so, but the selection of yarns, colors, set, size, etc, i.e. the weaver's interpretation of the draft, is very individual and is copyrightable.

QuakerWeaver (not verified)

Remarkably the pattern is best seen from across the room--looking across the fabric --when it is on the loom. Off the loom, as I found in my sample, the pattern is much more pronounced. So, this is my first shadow weave, first use of bamboo yarn, and  my first pass at sampling for a project straight from Handwoven. It's been a great experience and I've learned a lot about weaving, the Weavolution website, and how super wonderful this online community is. Thanks for all of the help and kindest regards! 

sally orgren

One trick I learned from Diane Mortensen at Convergence Vancouver is to stand on you loom bench to get a sense of your pattern. Sometimes the view sitting on the bench is too close as you discovered! With table looms we can just flip them on their side and walk across the room. Harder to do with floor looms! Another trick in the digital age is take a photo and then view it reduced or even step way back from your computer screen.

debmcclintock

Or look at your cloth thru the wrong end of your binoculars! It works. Might be safer than climbing on your loom bench .

Aunt Janet (not verified)

a reduction glass would be a handy tool to have at loom side for this purpose.  I need to find one.  I used one when painting watercolors, years ago. 

sally orgren

When I first read Deb's post, I thought she said "bifocals" (not binoculars) and I thought gee, when I learned that bench trick in 2002, I didn't wear bifocals!

So, if you take bifocals off and flip them around, does it work the same way as binoculars? Or, if you are near-sighted enough, can you just take off your glasses and view your fabric? (So it's a bit blurry, but would the pattern show better?) Have we just discovered there is some benefit to wearing glasses at last? ;-)

debmcclintock

ha! Sally, Sally, I just tested the bifocal and nope, they don't work well flipped...stick with binoculars!

Submitted by Anonymous (not verified) on