I have acquired a large, heavy boat shuttle with metal tips.  I'm not sure what it is:  maybe an industrial flying shuttle?  What is it, and would it be useful for a beginning weaver to have or is it of no value to me?

Thanks again, Friends

Candace

Comments

tien (not verified)

It's a fly shuttle, which means it's like a (hand) end feed shuttle, only probably heavier and with metal tips.  You could try sanding down the tips and using it as an end feed shuttle, but I'm not sure how well it would work - before doing anything I'd hold it in your hand and imagine throwing it back and forth - it might be too heavy, especially if you have small/delicate hands and wrists.

I hope that helps!

Dawn McCarthy

It's probably a 15+/-" flyshuttle to be used with flyboxes (a mechansim for sending a shuttle across very wide widths using a string and hammer). 

The metal tips can be uncomfortable if used as a hand shuttle.  The weight is actually beneficial for getting the shuttle across the wider widths.

 

Dawn

 

bloominloom-dawnmmcarthy.blogspot.com

 

 

 

steve104c (not verified)

Tien and Dawn are right. It is a fly shuttle. It looks like a Draper. Draper made commercial machanical looms. No longer around. If you have a large floor loom that has a piece of wood across the bottom of your beater bar(a place that supports the shuttle when you pass it through your shed) you can use it. It does have some weight to it. These are expensive shuttles. Don't get rid of it yet until you try it out. I have three of these and have tried them out and will be using them.............Steve.

Dawn McCarthy

If anyone is interested I have 2 Draper's for sale - each with 3 pirns for $25 each.  I will post on the "for sale" forum.

 

Dawn

 

 

celtinbirks

If anyone is interested, the one in the photo is also for sale for $20.  It is marked with what looks like "Lesfilsde H. Ferrand Opoharmont" Approx. 14 1/2 in. long.

JSloan

The pictured shuttle probably was used in a Draper 4X4 or C&K (Crompton & Knowles ) Loom. Weaving looms in many textile mills . especially in the 1950's on untill high speed jet and water jet looms were manufactured.

mrdubyah (not verified)

Once upon a time these were essential state of the art equipment.  Now, they're mostly used for candle sconces!

Submitted by celtinbirks on